750kg Furnace

The line included 4 casting lines, which can cast 4 different diameters or different shapes of brass rods at the same time.
1.1 Main Technical Parameters
1.1.1
Casting type: Four streams
1.1.2
Casting specification: brass/D5-160mm; (including: solid rod type & pipe type, shape is varied such as round, square, square with round corner,..).
1.1.3
Casting material: brass
1.1.4
Casting speed:
Pulling speed: 0~35mm/s (depends of size of the rod)
1.1.5 P
ower
Melting furnace: BMA-MFB-120; 120kw
Holding furnace: BMA-HFC-75; 75kw
Casting machine: BMA-CMA-70: 1.5kw; BMA-CMA-160; 4kw;
Cutting machine: BMA-PCA-A (Pneumatic): 3kw; BMB-HCB-A (Hydraulic) 6kw.
1.1.6
P
roduction capacity: 10-11MT/Day
1.1.7
Noise: ≤80db
1.18 Driving Directions: Two sides, 4 streams.

Main parameters
Part No.: BMA-HFC-75
Total Capacity: 3t
Working Capacity: 2.7t max
Rated Power: 75KW
Rated Voltage: 380V
Working Frequency: 50Hz
Furnace Inductor : U-type, Single coil.
Suggested Output Stream: 4
Cooling System: Water
Preheating (installation): 24-48h
Preheating (stops totally and restarts): 3-8h
Furnace Temp.(working): 1050°C
Furnace Temp.(holding): 1050°C
Main Components: Controller
Body (Firebrick, Quartzite Ramming Mass, Asbestos Sheet)
Inductor: Brass Ring, Coil, Water Jug, Launder
Graphite Die, Water Jacket

Brass Rod/pipe Forming
The system includes chute, graphite die (forming), seal components and water jacket (cooling). Water cycle type is one entry one exit. Different Copper Rod can be produced by altering the graphite die.