Z148W microseism squeeze molding machine/molding machine

Z148W microseism squeeze molding machine:
the steel structure of the fuselage, so it can significantly increase the rigidity
Z148W microseism squeeze molding machine:
Technical characteristics:
The microseism squeeze molding machine is fully buffered, high-frequency, low amplitude and pneumatic.
The shock part of the machine is buffer spring, so it can effectively reduce the impact to foundation
It is the steel structure of the fuselage, so it can significantly increase the rigidity
About the jolt-squeeze structure, it consists of the working table, jolt piston, jolt iron compressive piston, squeezing cylinder and so on
About the pressure head tumbler parts, it consists of the pressure head plate, the tumbler beam, the sun-wheel axle, the gear rack piston rod and so on, the tumbler has the buffer gear of the drive cylinder at both ends, so it can make the tumbler turn smoothly
The drawing structure, it consists of drawing cylinder connected with synchronizing shaft, the drawing cylinder adopts air pressure control, so it can guarantee the drawing smoothly beginning

Technical parameters:
Type
Z148WB
Z148WK
Foundry flask maximum dimension(mm)
800X600
800x630
Worktable dimension(mm)
900X730
1000x900
Jolting load(kgf)
600
750
Compressive stress(kgf)
10000
16000
Compress process(mm)
200
200
Moulding process(mm)
250
300
Productivity(M³/box)
40-60
40-60
Maximum distance compacting plate with worktable(mm)
620
620
Overall dimension(LXWXH)mm
1760X1180X2280
1615x1180x2175