Wednesday, April 13, 2011

Wet Filling System

1.Wet filling system is reliable and stable
2.Auto positioning auto transferring
3.Auto feeding auto bottoming
Wet Filling System:
Application: Used to fill the lead paste to the tubular
The system includes auto syringe machine, auto bottoming machine, auto washing & plate transferring device, lead paste collecting device.
Technical Parameters
Syringe Efficiency: 2-4 pieces/min
Working Pressure: ≤ 1.5Mpa
Grid Length: ≤ 700mm
Plate Width: ≤200mm
Motor Power: 10kw
Solenoid valves and electrical components
Controlling voltage: DC24V
Dimensions: 5000*3000 mm
Performance
1. Sliding runs in five speed levels to ensure that the paste density of syringe tube.
2.The length of pasting can be adjusted according to product specification.
3. Syringe speed can be continuously adjusted according to system pressure, to ensure product consistency.
4. The extrusion processes use wet active material paste filling, no dust pollution, good environmental performance.
5. The moving device speed is infinitely variable controlled by the transducer.
6. Auto positioning, auto transferring, auto feeding, and auto bottoming.
7. The bottom uses ultrasonic welding to ensure the strong structure.
8. Auto plate detecting. If there is no plate, the system auto stops.
9. PLC controlling system works with high precision, it is reliable and stable.
10. Initial capacity of the syringe battery can be increased by 10%.
11. After the washing, the lead paste and the water can be recycled.
12. High pressure washing, no blind angle.
13.You can select auto or manual modes.





No comments:

Post a Comment