Aluminum Die Casting Machine

1.The elaborately designed adopts independent high grad plunger 2-speed
2.computure control
3.aluminum alloy die casting machi
aluminum alloy cold chamber die casting machine , cold chamber die casting machine ,
aluminum alloy die casting machine .

1.The elaborately designed adopts independent high grad plunger 2-speed
2.computure control
3.aluminum alloy die casting machine

The elaborately designed shot system adopts independent high grad plunger 2-speed and pressure charging energy accumulator .


The die casting machine structure adopts 3-pull ord or C-shaped bracket plus hydraulic elevator device and satisfies requirements of moulds . Adopts high and low pressure twin pump with high performance and low noise,saves energy consumption and improves production efficiency .

Perpheral equipment series of cold chamber die casting machines .

To save manpower and improve production efficiency ,Zhenli dedicates in developing all kinds of peripheral equipment,designs safe and reliable newest devices .

Automatic ladle machine
Liquid is fed stably and precisely and the operation is convenient .
Precisely stops the liquid injection location; single-armed liquid feeding with stable liquid amount and lower defective rate of the finished products .
The time and speed can be set exteriorly and adjusted easily .

Automatic fetch machine
Its arms can 90 degrees rotate but not affect the mould replacing space .
The picking location points are accurate and the picking diameer can be adjusted with actual size of the casting
Can select the arm advancing waiting function,accelerate the picking speed and improve manufactureing speed of the finished products .


Automatic spraying machine
With unique design for the return circuit ,with even atomization and good effect.
The spray amount is controlled by the time and flow valve,with easy adjustment .
With steel tube design whose direction can be set freely .

Melting furnace
Three heat sources,namely electric power ,nature gas and fueled oil,are optional.





Technological Date of cold chamber Die-Casting Machine

Item
Unit
ZLC-220T
Clamping Force
KN
220
0
Die Stroke
MM
380
Die Thickness(Min-Max)
MM
200-600
Platen Size(HXV)
MM
755×840
Space Between Tie Bars
MM
510×510
Tie bar Diameter
MM
90
Intensification Injection Force
KN
290
Injection Force
KN
110
Injection Strokein
MM
400
Plunger Diameter
MM
50,60,65
Shot Weight
kg
1.2,1.8,2.1
Casting Pressure
Kgf/cm²
1477, 1026, 874
Casting area
cm²
135, 194, 228
Max Casting Area Under 40Mpa
cm²
604
Shot Injection Position
MM
0-125
Plunger Penetration
MM
145
Ejector Force
KN
121
Ejector Stroke
MM
85
Hydraulic Working Pressure
Kgf/cm²
140
Driving Motor
HP/KW
15
Hydaulic Oil Tank Capacity
L
460
Machine Weight
KG
7700
Machine Dimensions(LxWxH)
MM
5510×1225×2370