Resin Sand Renewable Line

Resin Sand Mixer,
Renewable,
Automatic Control
Description:
the system works to remove the residue coating of adhesive film on the surface of old sand. In according to the principle, it can be divided into three categories. Hot-method, dry-method and wet-method. The organic adhesive resin is usually water-immiscible so the wet-method is only suitable for the water glass sand. Dry-method is simple, less-pollution, low-cost and energy-saving and is extensively applied in resin sand. Hot-method reclaiming is only used for film removing of cold-setting sand requiring high removing rate.
Usage:
the system works to remove the residue coating of adhesive film on the surface of old sand. In according to the principle, it can be divided into three categories. Hot-method, dry-method and wet-method. The organic adhesive resin is usually water-immiscible so the wet-method is only suitable for the water glass sand. Dry-method is simple, less-pollution, low-cost and energy-saving and is extensively applied in resin sand. Hot-method reclaiming is only used for film removing of cold-setting sand requiring high removing rate.
Parameters:

Type Number
S524IV
S528IV
S5212II
S5216
S524IVA
S528IVA
Productivity
5
10
15
2×10
5
10
Reclaiming Principle
Centrifugal Striking
Centrifugal Strike Grinding
Motor Power
15
22
22
2×30×2
2×22
2×22
Rotary Speed
1500
1500
1000
1700
1500
1500
External Size
2.5×2.3×5.1
3.4×1.9×6.6
1.8×1.2×2.5
3.3×2.3×6.9
2.7×1.5×5.0
2.7×1.2×6.9
Weight
3.2
4.4
1.8
10.5