pass-through type shot blast machine

after service is perfact
adopt DISA&PANGBORN technology
suitable for the surface de-rusting & painting craft for steel plates
This kind of shot blasting machines are mainly used for treating long and/or flat components. The components continuously pass through the prechamber,the blasting chamber, and the cleaning chamber on a special roller conveyor. Highly efficient blast wheels fixed on the machine housing and make it possible to treat the components on all sides.
Disa
roller conveyor shot blasting machines are used to remove scale, rust and paint from long and/or flat components.

With 4 or 8 high power Hurricane blast wheels, mounted around the housing(both vertically and horizontally inclined), it is also possible to treat very complex components, which have pockets or difficult to reach areas. A highly wearresistant wire mesh belt,with tension adjustment, provides the part transport.

The special belt guiding enables the lower blast wheels to blast only through one belt position, which means that any masking is kept to a minimum.


Specification:

Item
Type
Dimension of inlet
Opening(mm)
Length of cleaning
Piece(mm)
Abrasive initial filling
(kg/min)
Outline dimension
(mm)
Total Power
(excludedusting)(kw)
Q698
800×400
1200~12000
4×250
25017×4500×9015
78.3
Q6912
1200×400
1200~6000
4×250
12180×4250×7095
78.3
Q6915
1500×400
1200~12000
4×250
15200×5370×6797
113.5
Q6920
2000×400
1200~12000
6×250
30650×6850×9095
156.6
Q6925
2500×800
3000~12000
6×250
31200×80870×7500
224.55
Q6930
3000×800
2400~12000
6×360
44042×6385×7758
204.8
Q6940
4000×400
4500~18000
6×360
45000×7830×11117
239.6