The upward continuous casting machine for oxygen-free copper rod is capable of producing directly from cathode to copper rod.
The upward continuous casting machine for oxygen-free copper rod (upward casting machine) is capable of producing directly
from cathode to bright and long oxygen-free copper rod , copper tube, flat copper bar and other special shaped copper material
. As compared with the black copper rod produced by traditional mangler from copper ingot, the rod produced by this new up-ward continuous casting technology has its advantage of
better quality, low production cost, low investment and no pollution in production
.
The composition of the system
1,Induction furnace
The induction furnace is consist of furnace body, furnace frame and inductor. The outside of the furnace body is steel structure and the inside is consist of fire-clay brick and quartz sand. The function of the furnace frame is support-ing the whole furnace. The furnace is fixed on the base by the foot screw. The inductor is made up of coil, water jacket, iron core and copper-ring. There are coils with water-jacket at the high voltage side. The voltage is adjustable step by step from 90V to 420V.There are short-circuit copper rings at the low-voltage side. After set up an electric circuit, it can emerge big current flow in the copper ring with the electromagnetic induction. The big current flow can melt the copper ring and electrolytic copper putted into the furnace. The water jacket and coil is cooled by the water. The cooling water is cycling and supplied by the cooling water system.
2.Continuous casting machine
The continuous casting machine is the main part of the system. It is consist of drawing mechanism, following mechanism of liquid level and freezer.
The drawing mechanism is made up of A.C. servo motor, two groups of drawing rollers and so on..It can produce 0-1000 times interval rotation per minute and draw up the copper rod continuous by the drawing rollers. One of the drawing mechanisms can drive 5 drawing rollers and draw up 5 copper rods.The following mechanism of liquid level guarantee that the deep of the freezer inserting into the copper liquid is relative stable.The freezer can cool the copper liquid into copper rod by heat exchange. Every freezer can be changed and controlled alone.
3, Frame of guide pulley
The frame of guide pulley is installed above the continuous casting machine. It is consist of platform, support, vertical guide pulley and cylinder. It can lead the copper rod to the every double-head wind machine without disturbance.
4,Limited device
The caging device are two devices installed between the frame of guide pulley and double-head wind machine. It is fitted with 5 groups of 24V up and down spacing which can control the speed of double-head wind machine by the electrical signal produced by the copper rod touching the up or down spacing.
5,Double-head wind machine
The double-head wind machine is made up of the drawing rollers, revolving chassis and spooling take-up unit. Every double-head wind machine can take-up two copper rods.
6,Cooling-water system
The cooling water system is a cycling system. It can supply 0.2-0.4Mpa cooling water for freezer, water jacket, coil. It is consist of 150M3 water pool, water pump, tube and cooling water tower. The temperature of water supplied to the system is 20-30 and the quantity of water flow is 50 M3/H7,Electrical system .The electrical system is consist of electrical power and control system.
7.Electrical system
The electrical power system supply the energy to every inductor through the power cabinets. The control system control the combined furnace, main machine, double-head wind machine and cooling water system pledging them to work in order. The control system of combined furnace is consist of melting furnace system and holding furnace system. The melting furnace operation cabinet and holding furnace operation cabinet are installed near the system.
8,Charging system
The system can charging whole piece of copper plate.
9,Thermosister
The thermosister is consist of temperature of copper liquid and temperature of cooling water.
Friday, December 31, 2010
upward continuous casting machine for oxygen-free copper rod
The casting machine is capable of producing directly from electrolytic copper to bright and long oxygen-free copper rod.
The casting machine is capable of producing directly
from electrolytic copper to bright and long oxygen-free copper rod , copper tube, flat copper bar and other special shaped copper material
. As compared with the black copper rod produced by traditional mangler from copper ingot, the rod produced by this new up-ward continuous casting technology has its advantage of
better quality, low production cost, low investment and no pollution in production
.
The composition of the system
1,Induction furnace
The induction furnace is consist of furnace body, furnace frame and inductor. The outside of the furnace body is steel structure and the inside is consist of fire-clay brick and quartz sand. The function of the furnace frame is support-ing the whole furnace. The furnace is fixed on the base by the foot screw. The inductor is made up of coil, water jacket, iron core and copper-ring. There are coils with water-jacket at the high voltage side. The voltage is adjustable step by step from 90V to 420V.There are short-circuit copper rings at the low-voltage side. After set up an electric circuit, it can emerge big current flow in the copper ring with the electromagnetic induction. The big current flow can melt the copper ring and electrolytic copper putted into the furnace. The water jacket and coil is cooled by the water. The cooling water is cycling and supplied by the cooling water system.
2.Continuous casting machine
The continuous casting machine is the main part of the system. It is consist of drawing mechanism, following mechanism of liquid level and freezer.
The drawing mechanism is made up of A.C. servo motor, two groups of drawing rollers and so on..It can produce 0-1000 times interval rotation per minute and draw up the copper rod continuous by the drawing rollers. One of the drawing mechanisms can drive 5 drawing rollers and draw up 5 copper rods.The following mechanism of liquid level guarantee that the deep of the freezer inserting into the copper liquid is relative stable.The freezer can cool the copper liquid into copper rod by heat exchange. Every freezer can be changed and controlled alone.
3, Frame of guide pulley
The frame of guide pulley is installed above the continuous casting machine. It is consist of platform, support, vertical guide pulley and cylinder. It can lead the copper rod to the every double-head wind machine without disturbance.
4,Limited device
The caging device are two devices installed between the frame of guide pulley and double-head wind machine. It is fitted with 5 groups of 24V up and down spacing which can control the speed of double-head wind machine by the electrical signal produced by the copper rod touching the up or down spacing.
5,Double-head wind machine
The double-head wind machine is made up of the drawing rollers, revolving chassis and spooling take-up unit. Every double-head wind machine can take-up two copper rods.
6,Cooling-water system
The cooling water system is a cycling system. It can supply 0.2-0.4Mpa cooling water for freezer, water jacket, coil. It is consist of 150M3 water pool, water pump, tube and cooling water tower. The temperature of water supplied to the system is 20-30 and the quantity of water flow is 50 M3/H7,Electrical system .The electrical system is consist of electrical power and control system.
7.Electrical system
The electrical power system supply the energy to every inductor through the power cabinets. The control system control the combined furnace, main machine, double-head wind machine and cooling water system pledging them to work in order. The control system of combined furnace is consist of melting furnace system and holding furnace system. The melting furnace operation cabinet and holding furnace operation cabinet are installed near the system.
8,Charging system
The system can charging whole piece of copper plate.
9,Thermosister
The thermosister is consist of temperature of copper liquid and temperature of cooling water.
The casting machine is capable of producing directly
from electrolytic copper to bright and long oxygen-free copper rod , copper tube, flat copper bar and other special shaped copper material
. As compared with the black copper rod produced by traditional mangler from copper ingot, the rod produced by this new up-ward continuous casting technology has its advantage of
better quality, low production cost, low investment and no pollution in production
.
The composition of the system
1,Induction furnace
The induction furnace is consist of furnace body, furnace frame and inductor. The outside of the furnace body is steel structure and the inside is consist of fire-clay brick and quartz sand. The function of the furnace frame is support-ing the whole furnace. The furnace is fixed on the base by the foot screw. The inductor is made up of coil, water jacket, iron core and copper-ring. There are coils with water-jacket at the high voltage side. The voltage is adjustable step by step from 90V to 420V.There are short-circuit copper rings at the low-voltage side. After set up an electric circuit, it can emerge big current flow in the copper ring with the electromagnetic induction. The big current flow can melt the copper ring and electrolytic copper putted into the furnace. The water jacket and coil is cooled by the water. The cooling water is cycling and supplied by the cooling water system.
2.Continuous casting machine
The continuous casting machine is the main part of the system. It is consist of drawing mechanism, following mechanism of liquid level and freezer.
The drawing mechanism is made up of A.C. servo motor, two groups of drawing rollers and so on..It can produce 0-1000 times interval rotation per minute and draw up the copper rod continuous by the drawing rollers. One of the drawing mechanisms can drive 5 drawing rollers and draw up 5 copper rods.The following mechanism of liquid level guarantee that the deep of the freezer inserting into the copper liquid is relative stable.The freezer can cool the copper liquid into copper rod by heat exchange. Every freezer can be changed and controlled alone.
3, Frame of guide pulley
The frame of guide pulley is installed above the continuous casting machine. It is consist of platform, support, vertical guide pulley and cylinder. It can lead the copper rod to the every double-head wind machine without disturbance.
4,Limited device
The caging device are two devices installed between the frame of guide pulley and double-head wind machine. It is fitted with 5 groups of 24V up and down spacing which can control the speed of double-head wind machine by the electrical signal produced by the copper rod touching the up or down spacing.
5,Double-head wind machine
The double-head wind machine is made up of the drawing rollers, revolving chassis and spooling take-up unit. Every double-head wind machine can take-up two copper rods.
6,Cooling-water system
The cooling water system is a cycling system. It can supply 0.2-0.4Mpa cooling water for freezer, water jacket, coil. It is consist of 150M3 water pool, water pump, tube and cooling water tower. The temperature of water supplied to the system is 20-30 and the quantity of water flow is 50 M3/H7,Electrical system .The electrical system is consist of electrical power and control system.
7.Electrical system
The electrical power system supply the energy to every inductor through the power cabinets. The control system control the combined furnace, main machine, double-head wind machine and cooling water system pledging them to work in order. The control system of combined furnace is consist of melting furnace system and holding furnace system. The melting furnace operation cabinet and holding furnace operation cabinet are installed near the system.
8,Charging system
The system can charging whole piece of copper plate.
9,Thermosister
The thermosister is consist of temperature of copper liquid and temperature of cooling water.
upward continuous casting machine for oxygen-free copper rod
The continuous casting machine is capable of producing from electrolytic copper to bright and long oxygen-free copper rod.
The continuous casting machine is capable of producing directly
from electrolytic copper to bright and long oxygen-free copper rod , copper tube, flat copper bar and other special shaped copper material
. The capacity of the system is in 5 models of 1,000 tons, 2,000tons, 3,000tons, 4,000-5,000tons and 8,000-10,000tons annually, and the copper rod diameters will be 8 mm, 14.4 mm, 17 mm, 20 mm and 25mm. As compared with the black copper rod produced by traditional mangler from copper ingot, the rod produced by this new up-ward continuous casting technology has its advantage of
better quality, low production cost, low investment and no pollution in production
.
The composition of the system
1,Induction furnace
The induction furnace is consist of furnace body, furnace frame and inductor. The outside of the furnace body is steel structure and the inside is consist of fire-clay brick and quartz sand. The function of the furnace frame is support-ing the whole furnace. The furnace is fixed on the base by the foot screw. The inductor is made up of coil, water jacket, iron core and copper-ring. There are coils with water-jacket at the high voltage side. The voltage is adjustable step by step from 90V to 420V.There are short-circuit copper rings at the low-voltage side. After set up an electric circuit, it can emerge big current flow in the copper ring with the electromagnetic induction. The big current flow can melt the copper ring and electrolytic copper putted into the furnace. The water jacket and coil is cooled by the water. The cooling water is cycling and supplied by the cooling water system.
2.Continuous casting machine
The continuous casting machine is the main part of the system. It is consist of drawing mechanism, following mechanism of liquid level and freezer.
The drawing mechanism is made up of A.C. servo motor, two groups of drawing rollers and so on..It can produce 0-1000 times interval rotation per minute and draw up the copper rod continuous by the drawing rollers. One of the drawing mechanisms can drive 5 drawing rollers and draw up 5 copper rods.The following mechanism of liquid level guarantee that the deep of the freezer inserting into the copper liquid is relative stable.The freezer can cool the copper liquid into copper rod by heat exchange. Every freezer can be changed and controlled alone.
3, Frame of guide pulley
The frame of guide pulley is installed above the continuous casting machine. It is consist of platform, support, vertical guide pulley and cylinder. It can lead the copper rod to the every double-head wind machine without disturbance.
4,Limited device
The caging device are two devices installed between the frame of guide pulley and double-head wind machine. It is fitted with 5 groups of 24V up and down spacing which can control the speed of double-head wind machine by the electrical signal produced by the copper rod touching the up or down spacing.
5,Double-head wind machine
The double-head wind machine is made up of the drawing rollers, revolving chassis and spooling take-up unit. Every double-head wind machine can take-up two copper rods.
6,Cooling-water system
The cooling water system is a cycling system. It can supply 0.2-0.4Mpa cooling water for freezer, water jacket, coil. It is consist of 150M3 water pool, water pump, tube and cooling water tower. The temperature of water supplied to the system is 20-30 and the quantity of water flow is 50 M3/H7,Electrical system .The electrical system is consist of electrical power and control system.
7.Electrical system
The electrical power system supply the energy to every inductor through the power cabinets. The control system control the combined furnace, main machine, double-head wind machine and cooling water system pledging them to work in order. The control system of combined furnace is consist of melting furnace system and holding furnace system. The melting furnace operation cabinet and holding furnace operation cabinet are installed near the system.
8,Charging system
The system can charging whole piece of copper plate.
9,Thermosister
The thermosister is consist of temperature of copper liquid and temperature of cooling water.
The continuous casting machine is capable of producing directly
from electrolytic copper to bright and long oxygen-free copper rod , copper tube, flat copper bar and other special shaped copper material
. The capacity of the system is in 5 models of 1,000 tons, 2,000tons, 3,000tons, 4,000-5,000tons and 8,000-10,000tons annually, and the copper rod diameters will be 8 mm, 14.4 mm, 17 mm, 20 mm and 25mm. As compared with the black copper rod produced by traditional mangler from copper ingot, the rod produced by this new up-ward continuous casting technology has its advantage of
better quality, low production cost, low investment and no pollution in production
.
The composition of the system
1,Induction furnace
The induction furnace is consist of furnace body, furnace frame and inductor. The outside of the furnace body is steel structure and the inside is consist of fire-clay brick and quartz sand. The function of the furnace frame is support-ing the whole furnace. The furnace is fixed on the base by the foot screw. The inductor is made up of coil, water jacket, iron core and copper-ring. There are coils with water-jacket at the high voltage side. The voltage is adjustable step by step from 90V to 420V.There are short-circuit copper rings at the low-voltage side. After set up an electric circuit, it can emerge big current flow in the copper ring with the electromagnetic induction. The big current flow can melt the copper ring and electrolytic copper putted into the furnace. The water jacket and coil is cooled by the water. The cooling water is cycling and supplied by the cooling water system.
2.Continuous casting machine
The continuous casting machine is the main part of the system. It is consist of drawing mechanism, following mechanism of liquid level and freezer.
The drawing mechanism is made up of A.C. servo motor, two groups of drawing rollers and so on..It can produce 0-1000 times interval rotation per minute and draw up the copper rod continuous by the drawing rollers. One of the drawing mechanisms can drive 5 drawing rollers and draw up 5 copper rods.The following mechanism of liquid level guarantee that the deep of the freezer inserting into the copper liquid is relative stable.The freezer can cool the copper liquid into copper rod by heat exchange. Every freezer can be changed and controlled alone.
3, Frame of guide pulley
The frame of guide pulley is installed above the continuous casting machine. It is consist of platform, support, vertical guide pulley and cylinder. It can lead the copper rod to the every double-head wind machine without disturbance.
4,Limited device
The caging device are two devices installed between the frame of guide pulley and double-head wind machine. It is fitted with 5 groups of 24V up and down spacing which can control the speed of double-head wind machine by the electrical signal produced by the copper rod touching the up or down spacing.
5,Double-head wind machine
The double-head wind machine is made up of the drawing rollers, revolving chassis and spooling take-up unit. Every double-head wind machine can take-up two copper rods.
6,Cooling-water system
The cooling water system is a cycling system. It can supply 0.2-0.4Mpa cooling water for freezer, water jacket, coil. It is consist of 150M3 water pool, water pump, tube and cooling water tower. The temperature of water supplied to the system is 20-30 and the quantity of water flow is 50 M3/H7,Electrical system .The electrical system is consist of electrical power and control system.
7.Electrical system
The electrical power system supply the energy to every inductor through the power cabinets. The control system control the combined furnace, main machine, double-head wind machine and cooling water system pledging them to work in order. The control system of combined furnace is consist of melting furnace system and holding furnace system. The melting furnace operation cabinet and holding furnace operation cabinet are installed near the system.
8,Charging system
The system can charging whole piece of copper plate.
9,Thermosister
The thermosister is consist of temperature of copper liquid and temperature of cooling water.
upward continuous casting machine for oxygen-free copper rod
The continuous casting machine is capable of producing from electrolytic copper to bright and long oxygen-free copper rod.
The continuous casting machine is capable of producing directly
from electrolytic copper to bright and long oxygen-free copper rod , copper tube, flat copper bar and other special shaped copper material
. The capacity of the system is in 5 models of 1,000 tons, 2,000tons, 3,000tons, 4,000-5,000tons and 8,000-10,000tons annually, and the copper rod diameters will be 8 mm, 14.4 mm, 17 mm, 20 mm and 25mm. As compared with the black copper rod produced by traditional mangler from copper ingot, the rod produced by this new up-ward continuous casting technology has its advantage of
better quality, low production cost, low investment and no pollution in production
.
The composition of the system
1,Induction furnace
The induction furnace is consist of furnace body, furnace frame and inductor. The outside of the furnace body is steel structure and the inside is consist of fire-clay brick and quartz sand. The function of the furnace frame is support-ing the whole furnace. The furnace is fixed on the base by the foot screw. The inductor is made up of coil, water jacket, iron core and copper-ring. There are coils with water-jacket at the high voltage side. The voltage is adjustable step by step from 90V to 420V.There are short-circuit copper rings at the low-voltage side. After set up an electric circuit, it can emerge big current flow in the copper ring with the electromagnetic induction. The big current flow can melt the copper ring and electrolytic copper putted into the furnace. The water jacket and coil is cooled by the water. The cooling water is cycling and supplied by the cooling water system.
2.Continuous casting machine
The continuous casting machine is the main part of the system. It is consist of drawing mechanism, following mechanism of liquid level and freezer.
The drawing mechanism is made up of A.C. servo motor, two groups of drawing rollers and so on..It can produce 0-1000 times interval rotation per minute and draw up the copper rod continuous by the drawing rollers. One of the drawing mechanisms can drive 5 drawing rollers and draw up 5 copper rods.The following mechanism of liquid level guarantee that the deep of the freezer inserting into the copper liquid is relative stable.The freezer can cool the copper liquid into copper rod by heat exchange. Every freezer can be changed and controlled alone.
3, Frame of guide pulley
The frame of guide pulley is installed above the continuous casting machine. It is consist of platform, support, vertical guide pulley and cylinder. It can lead the copper rod to the every double-head wind machine without disturbance.
4,Limited device
The caging device are two devices installed between the frame of guide pulley and double-head wind machine. It is fitted with 5 groups of 24V up and down spacing which can control the speed of double-head wind machine by the electrical signal produced by the copper rod touching the up or down spacing.
5,Double-head wind machine
The double-head wind machine is made up of the drawing rollers, revolving chassis and spooling take-up unit. Every double-head wind machine can take-up two copper rods.
6,Cooling-water system
The cooling water system is a cycling system. It can supply 0.2-0.4Mpa cooling water for freezer, water jacket, coil. It is consist of 150M3 water pool, water pump, tube and cooling water tower. The temperature of water supplied to the system is 20-30 and the quantity of water flow is 50 M3/H7,Electrical system .The electrical system is consist of electrical power and control system.
7.Electrical system
The electrical power system supply the energy to every inductor through the power cabinets. The control system control the combined furnace, main machine, double-head wind machine and cooling water system pledging them to work in order. The control system of combined furnace is consist of melting furnace system and holding furnace system. The melting furnace operation cabinet and holding furnace operation cabinet are installed near the system.
8,Charging system
The system can charging whole piece of copper plate.
9,Thermosister
The thermosister is consist of temperature of copper liquid and temperature of cooling water.
The continuous casting machine is capable of producing directly
from electrolytic copper to bright and long oxygen-free copper rod , copper tube, flat copper bar and other special shaped copper material
. The capacity of the system is in 5 models of 1,000 tons, 2,000tons, 3,000tons, 4,000-5,000tons and 8,000-10,000tons annually, and the copper rod diameters will be 8 mm, 14.4 mm, 17 mm, 20 mm and 25mm. As compared with the black copper rod produced by traditional mangler from copper ingot, the rod produced by this new up-ward continuous casting technology has its advantage of
better quality, low production cost, low investment and no pollution in production
.
The composition of the system
1,Induction furnace
The induction furnace is consist of furnace body, furnace frame and inductor. The outside of the furnace body is steel structure and the inside is consist of fire-clay brick and quartz sand. The function of the furnace frame is support-ing the whole furnace. The furnace is fixed on the base by the foot screw. The inductor is made up of coil, water jacket, iron core and copper-ring. There are coils with water-jacket at the high voltage side. The voltage is adjustable step by step from 90V to 420V.There are short-circuit copper rings at the low-voltage side. After set up an electric circuit, it can emerge big current flow in the copper ring with the electromagnetic induction. The big current flow can melt the copper ring and electrolytic copper putted into the furnace. The water jacket and coil is cooled by the water. The cooling water is cycling and supplied by the cooling water system.
2.Continuous casting machine
The continuous casting machine is the main part of the system. It is consist of drawing mechanism, following mechanism of liquid level and freezer.
The drawing mechanism is made up of A.C. servo motor, two groups of drawing rollers and so on..It can produce 0-1000 times interval rotation per minute and draw up the copper rod continuous by the drawing rollers. One of the drawing mechanisms can drive 5 drawing rollers and draw up 5 copper rods.The following mechanism of liquid level guarantee that the deep of the freezer inserting into the copper liquid is relative stable.The freezer can cool the copper liquid into copper rod by heat exchange. Every freezer can be changed and controlled alone.
3, Frame of guide pulley
The frame of guide pulley is installed above the continuous casting machine. It is consist of platform, support, vertical guide pulley and cylinder. It can lead the copper rod to the every double-head wind machine without disturbance.
4,Limited device
The caging device are two devices installed between the frame of guide pulley and double-head wind machine. It is fitted with 5 groups of 24V up and down spacing which can control the speed of double-head wind machine by the electrical signal produced by the copper rod touching the up or down spacing.
5,Double-head wind machine
The double-head wind machine is made up of the drawing rollers, revolving chassis and spooling take-up unit. Every double-head wind machine can take-up two copper rods.
6,Cooling-water system
The cooling water system is a cycling system. It can supply 0.2-0.4Mpa cooling water for freezer, water jacket, coil. It is consist of 150M3 water pool, water pump, tube and cooling water tower. The temperature of water supplied to the system is 20-30 and the quantity of water flow is 50 M3/H7,Electrical system .The electrical system is consist of electrical power and control system.
7.Electrical system
The electrical power system supply the energy to every inductor through the power cabinets. The control system control the combined furnace, main machine, double-head wind machine and cooling water system pledging them to work in order. The control system of combined furnace is consist of melting furnace system and holding furnace system. The melting furnace operation cabinet and holding furnace operation cabinet are installed near the system.
8,Charging system
The system can charging whole piece of copper plate.
9,Thermosister
The thermosister is consist of temperature of copper liquid and temperature of cooling water.
upward continuous casting machine for oxygen-free copper rod
The upward continuous casting machine for oxygen-free copper rod is capable of producing directly from cathode to copper rod.
The upward continuous casting machine for oxygen-free copper rod is capable of producing directly
from cathode to bright and long oxygen-free copper rod , copper tube, flat copper bar and other special shaped copper material
. As compared with the black copper rod produced by traditional mangler from copper ingot, the rod produced by this new up-ward continuous casting technology has its advantage of
better quality, low production cost, low investment and no pollution in production
.
The composition of the system
1,Induction furnace
The induction furnace is consist of furnace body, furnace frame and inductor. The outside of the furnace body is steel structure and the inside is consist of fire-clay brick and quartz sand. The function of the furnace frame is support-ing the whole furnace. The furnace is fixed on the base by the foot screw. The inductor is made up of coil, water jacket, iron core and copper-ring. There are coils with water-jacket at the high voltage side. The voltage is adjustable step by step from 90V to 420V.There are short-circuit copper rings at the low-voltage side. After set up an electric circuit, it can emerge big current flow in the copper ring with the electromagnetic induction. The big current flow can melt the copper ring and electrolytic copper putted into the furnace. The water jacket and coil is cooled by the water. The cooling water is cycling and supplied by the cooling water system.
2.Continuous casting machine
The continuous casting machine is the main part of the system. It is consist of drawing mechanism, following mechanism of liquid level and freezer.
The drawing mechanism is made up of A.C. servo motor, two groups of drawing rollers and so on..It can produce 0-1000 times interval rotation per minute and draw up the copper rod continuous by the drawing rollers. One of the drawing mechanisms can drive 5 drawing rollers and draw up 5 copper rods.The following mechanism of liquid level guarantee that the deep of the freezer inserting into the copper liquid is relative stable.The freezer can cool the copper liquid into copper rod by heat exchange. Every freezer can be changed and controlled alone.
3, Frame of guide pulley
The frame of guide pulley is installed above the continuous casting machine. It is consist of platform, support, vertical guide pulley and cylinder. It can lead the copper rod to the every double-head wind machine without disturbance.
4,Limited device
The caging device are two devices installed between the frame of guide pulley and double-head wind machine. It is fitted with 5 groups of 24V up and down spacing which can control the speed of double-head wind machine by the electrical signal produced by the copper rod touching the up or down spacing.
5,Double-head wind machine
The double-head wind machine is made up of the drawing rollers, revolving chassis and spooling take-up unit. Every double-head wind machine can take-up two copper rods.
6,Cooling-water system
The cooling water system is a cycling system. It can supply 0.2-0.4Mpa cooling water for freezer, water jacket, coil. It is consist of 150M3 water pool, water pump, tube and cooling water tower. The temperature of water supplied to the system is 20-30 and the quantity of water flow is 50 M3/H7,Electrical system .The electrical system is consist of electrical power and control system.
7.Electrical system
The electrical power system supply the energy to every inductor through the power cabinets. The control system control the combined furnace, main machine, double-head wind machine and cooling water system pledging them to work in order. The control system of combined furnace is consist of melting furnace system and holding furnace system. The melting furnace operation cabinet and holding furnace operation cabinet are installed near the system.
8,Charging system
The system can charging whole piece of copper plate.
9,Thermosister
The thermosister is consist of temperature of copper liquid and temperature of cooling water.
The upward continuous casting machine for oxygen-free copper rod is capable of producing directly
from cathode to bright and long oxygen-free copper rod , copper tube, flat copper bar and other special shaped copper material
. As compared with the black copper rod produced by traditional mangler from copper ingot, the rod produced by this new up-ward continuous casting technology has its advantage of
better quality, low production cost, low investment and no pollution in production
.
The composition of the system
1,Induction furnace
The induction furnace is consist of furnace body, furnace frame and inductor. The outside of the furnace body is steel structure and the inside is consist of fire-clay brick and quartz sand. The function of the furnace frame is support-ing the whole furnace. The furnace is fixed on the base by the foot screw. The inductor is made up of coil, water jacket, iron core and copper-ring. There are coils with water-jacket at the high voltage side. The voltage is adjustable step by step from 90V to 420V.There are short-circuit copper rings at the low-voltage side. After set up an electric circuit, it can emerge big current flow in the copper ring with the electromagnetic induction. The big current flow can melt the copper ring and electrolytic copper putted into the furnace. The water jacket and coil is cooled by the water. The cooling water is cycling and supplied by the cooling water system.
2.Continuous casting machine
The continuous casting machine is the main part of the system. It is consist of drawing mechanism, following mechanism of liquid level and freezer.
The drawing mechanism is made up of A.C. servo motor, two groups of drawing rollers and so on..It can produce 0-1000 times interval rotation per minute and draw up the copper rod continuous by the drawing rollers. One of the drawing mechanisms can drive 5 drawing rollers and draw up 5 copper rods.The following mechanism of liquid level guarantee that the deep of the freezer inserting into the copper liquid is relative stable.The freezer can cool the copper liquid into copper rod by heat exchange. Every freezer can be changed and controlled alone.
3, Frame of guide pulley
The frame of guide pulley is installed above the continuous casting machine. It is consist of platform, support, vertical guide pulley and cylinder. It can lead the copper rod to the every double-head wind machine without disturbance.
4,Limited device
The caging device are two devices installed between the frame of guide pulley and double-head wind machine. It is fitted with 5 groups of 24V up and down spacing which can control the speed of double-head wind machine by the electrical signal produced by the copper rod touching the up or down spacing.
5,Double-head wind machine
The double-head wind machine is made up of the drawing rollers, revolving chassis and spooling take-up unit. Every double-head wind machine can take-up two copper rods.
6,Cooling-water system
The cooling water system is a cycling system. It can supply 0.2-0.4Mpa cooling water for freezer, water jacket, coil. It is consist of 150M3 water pool, water pump, tube and cooling water tower. The temperature of water supplied to the system is 20-30 and the quantity of water flow is 50 M3/H7,Electrical system .The electrical system is consist of electrical power and control system.
7.Electrical system
The electrical power system supply the energy to every inductor through the power cabinets. The control system control the combined furnace, main machine, double-head wind machine and cooling water system pledging them to work in order. The control system of combined furnace is consist of melting furnace system and holding furnace system. The melting furnace operation cabinet and holding furnace operation cabinet are installed near the system.
8,Charging system
The system can charging whole piece of copper plate.
9,Thermosister
The thermosister is consist of temperature of copper liquid and temperature of cooling water.
Automatic Cast Ball Production Line
1.The automatic cast ball prodution line is highly automatic and high-tech.
2.The automatic cast ball production line is researched and developed by ourselves.during all the operating process,it adopted the computer to control,which is more standard and high-efficiency.
3.Using this equipment is not only improve the quality of products,but also reduce the producing costs.
2.The automatic cast ball production line is researched and developed by ourselves.during all the operating process,it adopted the computer to control,which is more standard and high-efficiency.
3.Using this equipment is not only improve the quality of products,but also reduce the producing costs.
upward continuous casting machine for oxygen-free copper rod
The continuous casting machine is capable of producing from electrolytic copper to bright and long oxygen-free copper rod.
The continuous casting machine is capable of producing directly
from electrolytic copper to bright and long oxygen-free copper rod , copper tube, flat copper bar and other special shaped copper material
. As compared with the black copper rod produced by traditional mangler from copper ingot, the rod produced by this new up-ward continuous casting technology has its advantage of
better quality, low production cost, low investment and no pollution in production
.
The composition of the system
1,Induction furnace
The induction furnace is consist of furnace body, furnace frame and inductor. The outside of the furnace body is steel structure and the inside is consist of fire-clay brick and quartz sand. The function of the furnace frame is support-ing the whole furnace. The furnace is fixed on the base by the foot screw. The inductor is made up of coil, water jacket, iron core and copper-ring. There are coils with water-jacket at the high voltage side. The voltage is adjustable step by step from 90V to 420V.There are short-circuit copper rings at the low-voltage side. After set up an electric circuit, it can emerge big current flow in the copper ring with the electromagnetic induction. The big current flow can melt the copper ring and electrolytic copper putted into the furnace. The water jacket and coil is cooled by the water. The cooling water is cycling and supplied by the cooling water system.
2.Continuous casting machine
The continuous casting machine is the main part of the system. It is consist of drawing mechanism, following mechanism of liquid level and freezer.
The drawing mechanism is made up of A.C. servo motor, two groups of drawing rollers and so on..It can produce 0-1000 times interval rotation per minute and draw up the copper rod continuous by the drawing rollers. One of the drawing mechanisms can drive 5 drawing rollers and draw up 5 copper rods.The following mechanism of liquid level guarantee that the deep of the freezer inserting into the copper liquid is relative stable.The freezer can cool the copper liquid into copper rod by heat exchange. Every freezer can be changed and controlled alone.
3, Frame of guide pulley
The frame of guide pulley is installed above the continuous casting machine. It is consist of platform, support, vertical guide pulley and cylinder. It can lead the copper rod to the every double-head wind machine without disturbance.
4,Limited device
The caging device are two devices installed between the frame of guide pulley and double-head wind machine. It is fitted with 5 groups of 24V up and down spacing which can control the speed of double-head wind machine by the electrical signal produced by the copper rod touching the up or down spacing.
5,Double-head wind machine
The double-head wind machine is made up of the drawing rollers, revolving chassis and spooling take-up unit. Every double-head wind machine can take-up two copper rods.
6,Cooling-water system
The cooling water system is a cycling system. It can supply 0.2-0.4Mpa cooling water for freezer, water jacket, coil. It is consist of 150M3 water pool, water pump, tube and cooling water tower. The temperature of water supplied to the system is 20-30 and the quantity of water flow is 50 M3/H7,Electrical system .The electrical system is consist of electrical power and control system.
7.Electrical system
The electrical power system supply the energy to every inductor through the power cabinets. The control system control the combined furnace, main machine, double-head wind machine and cooling water system pledging them to work in order. The control system of combined furnace is consist of melting furnace system and holding furnace system. The melting furnace operation cabinet and holding furnace operation cabinet are installed near the system.
8,Charging system
The system can charging whole piece of copper plate.
9,Thermosister
The thermosister is consist of temperature of copper liquid and temperature of cooling water.
The continuous casting machine is capable of producing directly
from electrolytic copper to bright and long oxygen-free copper rod , copper tube, flat copper bar and other special shaped copper material
. As compared with the black copper rod produced by traditional mangler from copper ingot, the rod produced by this new up-ward continuous casting technology has its advantage of
better quality, low production cost, low investment and no pollution in production
.
The composition of the system
1,Induction furnace
The induction furnace is consist of furnace body, furnace frame and inductor. The outside of the furnace body is steel structure and the inside is consist of fire-clay brick and quartz sand. The function of the furnace frame is support-ing the whole furnace. The furnace is fixed on the base by the foot screw. The inductor is made up of coil, water jacket, iron core and copper-ring. There are coils with water-jacket at the high voltage side. The voltage is adjustable step by step from 90V to 420V.There are short-circuit copper rings at the low-voltage side. After set up an electric circuit, it can emerge big current flow in the copper ring with the electromagnetic induction. The big current flow can melt the copper ring and electrolytic copper putted into the furnace. The water jacket and coil is cooled by the water. The cooling water is cycling and supplied by the cooling water system.
2.Continuous casting machine
The continuous casting machine is the main part of the system. It is consist of drawing mechanism, following mechanism of liquid level and freezer.
The drawing mechanism is made up of A.C. servo motor, two groups of drawing rollers and so on..It can produce 0-1000 times interval rotation per minute and draw up the copper rod continuous by the drawing rollers. One of the drawing mechanisms can drive 5 drawing rollers and draw up 5 copper rods.The following mechanism of liquid level guarantee that the deep of the freezer inserting into the copper liquid is relative stable.The freezer can cool the copper liquid into copper rod by heat exchange. Every freezer can be changed and controlled alone.
3, Frame of guide pulley
The frame of guide pulley is installed above the continuous casting machine. It is consist of platform, support, vertical guide pulley and cylinder. It can lead the copper rod to the every double-head wind machine without disturbance.
4,Limited device
The caging device are two devices installed between the frame of guide pulley and double-head wind machine. It is fitted with 5 groups of 24V up and down spacing which can control the speed of double-head wind machine by the electrical signal produced by the copper rod touching the up or down spacing.
5,Double-head wind machine
The double-head wind machine is made up of the drawing rollers, revolving chassis and spooling take-up unit. Every double-head wind machine can take-up two copper rods.
6,Cooling-water system
The cooling water system is a cycling system. It can supply 0.2-0.4Mpa cooling water for freezer, water jacket, coil. It is consist of 150M3 water pool, water pump, tube and cooling water tower. The temperature of water supplied to the system is 20-30 and the quantity of water flow is 50 M3/H7,Electrical system .The electrical system is consist of electrical power and control system.
7.Electrical system
The electrical power system supply the energy to every inductor through the power cabinets. The control system control the combined furnace, main machine, double-head wind machine and cooling water system pledging them to work in order. The control system of combined furnace is consist of melting furnace system and holding furnace system. The melting furnace operation cabinet and holding furnace operation cabinet are installed near the system.
8,Charging system
The system can charging whole piece of copper plate.
9,Thermosister
The thermosister is consist of temperature of copper liquid and temperature of cooling water.
upward continuous casting machine for oxygen-free copper rod
The continuous casting machine is capable of producing from electrolytic copper to bright and long oxygen-free copper rod.
The continuous casting machine is capable of producing directly
from electrolytic copper to bright and long oxygen-free copper rod , copper tube, flat copper bar and other special shaped copper material
. As compared with the black copper rod produced by traditional mangler from copper ingot, the rod produced by this new up-ward continuous casting technology has its advantage of
better quality, low production cost, low investment and no pollution in production
.
The composition of the system
1,Induction furnace
The induction furnace is consist of furnace body, furnace frame and inductor. The outside of the furnace body is steel structure and the inside is consist of fire-clay brick and quartz sand. The function of the furnace frame is support-ing the whole furnace. The furnace is fixed on the base by the foot screw. The inductor is made up of coil, water jacket, iron core and copper-ring. There are coils with water-jacket at the high voltage side. The voltage is adjustable step by step from 90V to 420V.There are short-circuit copper rings at the low-voltage side. After set up an electric circuit, it can emerge big current flow in the copper ring with the electromagnetic induction. The big current flow can melt the copper ring and electrolytic copper putted into the furnace. The water jacket and coil is cooled by the water. The cooling water is cycling and supplied by the cooling water system.
2.Continuous casting machine
The continuous casting machine is the main part of the system. It is consist of drawing mechanism, following mechanism of liquid level and freezer.
The drawing mechanism is made up of A.C. servo motor, two groups of drawing rollers and so on..It can produce 0-1000 times interval rotation per minute and draw up the copper rod continuous by the drawing rollers. One of the drawing mechanisms can drive 5 drawing rollers and draw up 5 copper rods.The following mechanism of liquid level guarantee that the deep of the freezer inserting into the copper liquid is relative stable.The freezer can cool the copper liquid into copper rod by heat exchange. Every freezer can be changed and controlled alone.
3, Frame of guide pulley
The frame of guide pulley is installed above the continuous casting machine. It is consist of platform, support, vertical guide pulley and cylinder. It can lead the copper rod to the every double-head wind machine without disturbance.
4,Limited device
The caging device are two devices installed between the frame of guide pulley and double-head wind machine. It is fitted with 5 groups of 24V up and down spacing which can control the speed of double-head wind machine by the electrical signal produced by the copper rod touching the up or down spacing.
5,Double-head wind machine
The double-head wind machine is made up of the drawing rollers, revolving chassis and spooling take-up unit. Every double-head wind machine can take-up two copper rods.
6,Cooling-water system
The cooling water system is a cycling system. It can supply 0.2-0.4Mpa cooling water for freezer, water jacket, coil. It is consist of 150M3 water pool, water pump, tube and cooling water tower. The temperature of water supplied to the system is 20-30 and the quantity of water flow is 50 M3/H7,Electrical system .The electrical system is consist of electrical power and control system.
7.Electrical system
The electrical power system supply the energy to every inductor through the power cabinets. The control system control the combined furnace, main machine, double-head wind machine and cooling water system pledging them to work in order. The control system of combined furnace is consist of melting furnace system and holding furnace system. The melting furnace operation cabinet and holding furnace operation cabinet are installed near the system.
8,Charging system
The system can charging whole piece of copper plate.
9,Thermosister
The thermosister is consist of temperature of copper liquid and temperature of cooling water.
The continuous casting machine is capable of producing directly
from electrolytic copper to bright and long oxygen-free copper rod , copper tube, flat copper bar and other special shaped copper material
. As compared with the black copper rod produced by traditional mangler from copper ingot, the rod produced by this new up-ward continuous casting technology has its advantage of
better quality, low production cost, low investment and no pollution in production
.
The composition of the system
1,Induction furnace
The induction furnace is consist of furnace body, furnace frame and inductor. The outside of the furnace body is steel structure and the inside is consist of fire-clay brick and quartz sand. The function of the furnace frame is support-ing the whole furnace. The furnace is fixed on the base by the foot screw. The inductor is made up of coil, water jacket, iron core and copper-ring. There are coils with water-jacket at the high voltage side. The voltage is adjustable step by step from 90V to 420V.There are short-circuit copper rings at the low-voltage side. After set up an electric circuit, it can emerge big current flow in the copper ring with the electromagnetic induction. The big current flow can melt the copper ring and electrolytic copper putted into the furnace. The water jacket and coil is cooled by the water. The cooling water is cycling and supplied by the cooling water system.
2.Continuous casting machine
The continuous casting machine is the main part of the system. It is consist of drawing mechanism, following mechanism of liquid level and freezer.
The drawing mechanism is made up of A.C. servo motor, two groups of drawing rollers and so on..It can produce 0-1000 times interval rotation per minute and draw up the copper rod continuous by the drawing rollers. One of the drawing mechanisms can drive 5 drawing rollers and draw up 5 copper rods.The following mechanism of liquid level guarantee that the deep of the freezer inserting into the copper liquid is relative stable.The freezer can cool the copper liquid into copper rod by heat exchange. Every freezer can be changed and controlled alone.
3, Frame of guide pulley
The frame of guide pulley is installed above the continuous casting machine. It is consist of platform, support, vertical guide pulley and cylinder. It can lead the copper rod to the every double-head wind machine without disturbance.
4,Limited device
The caging device are two devices installed between the frame of guide pulley and double-head wind machine. It is fitted with 5 groups of 24V up and down spacing which can control the speed of double-head wind machine by the electrical signal produced by the copper rod touching the up or down spacing.
5,Double-head wind machine
The double-head wind machine is made up of the drawing rollers, revolving chassis and spooling take-up unit. Every double-head wind machine can take-up two copper rods.
6,Cooling-water system
The cooling water system is a cycling system. It can supply 0.2-0.4Mpa cooling water for freezer, water jacket, coil. It is consist of 150M3 water pool, water pump, tube and cooling water tower. The temperature of water supplied to the system is 20-30 and the quantity of water flow is 50 M3/H7,Electrical system .The electrical system is consist of electrical power and control system.
7.Electrical system
The electrical power system supply the energy to every inductor through the power cabinets. The control system control the combined furnace, main machine, double-head wind machine and cooling water system pledging them to work in order. The control system of combined furnace is consist of melting furnace system and holding furnace system. The melting furnace operation cabinet and holding furnace operation cabinet are installed near the system.
8,Charging system
The system can charging whole piece of copper plate.
9,Thermosister
The thermosister is consist of temperature of copper liquid and temperature of cooling water.
upward continuous casting machine for oxygen-free copper rod
The casting machine is capable of producing directly from electrolytic copper to bright and long oxygen-free copper rod.
The casting machine is capable of producing directly
from electrolytic copper to bright and long oxygen-free copper rod , copper tube, flat copper bar and other special shaped copper material
. As compared with the black copper rod produced by traditional mangler from copper ingot, the rod produced by this new up-ward continuous casting technology has its advantage of
better quality, low production cost, low investment and no pollution in production
.
The composition of the system
1,Induction furnace
The induction furnace is consist of furnace body, furnace frame and inductor. The outside of the furnace body is steel structure and the inside is consist of fire-clay brick and quartz sand. The function of the furnace frame is support-ing the whole furnace. The furnace is fixed on the base by the foot screw. The inductor is made up of coil, water jacket, iron core and copper-ring. There are coils with water-jacket at the high voltage side. The voltage is adjustable step by step from 90V to 420V.There are short-circuit copper rings at the low-voltage side. After set up an electric circuit, it can emerge big current flow in the copper ring with the electromagnetic induction. The big current flow can melt the copper ring and electrolytic copper putted into the furnace. The water jacket and coil is cooled by the water. The cooling water is cycling and supplied by the cooling water system.
2.Continuous casting machine
The continuous casting machine is the main part of the system. It is consist of drawing mechanism, following mechanism of liquid level and freezer.
The drawing mechanism is made up of A.C. servo motor, two groups of drawing rollers and so on..It can produce 0-1000 times interval rotation per minute and draw up the copper rod continuous by the drawing rollers. One of the drawing mechanisms can drive 5 drawing rollers and draw up 5 copper rods.The following mechanism of liquid level guarantee that the deep of the freezer inserting into the copper liquid is relative stable.The freezer can cool the copper liquid into copper rod by heat exchange. Every freezer can be changed and controlled alone.
3, Frame of guide pulley
The frame of guide pulley is installed above the continuous casting machine. It is consist of platform, support, vertical guide pulley and cylinder. It can lead the copper rod to the every double-head wind machine without disturbance.
4,Limited device
The caging device are two devices installed between the frame of guide pulley and double-head wind machine. It is fitted with 5 groups of 24V up and down spacing which can control the speed of double-head wind machine by the electrical signal produced by the copper rod touching the up or down spacing.
5,Double-head wind machine
The double-head wind machine is made up of the drawing rollers, revolving chassis and spooling take-up unit. Every double-head wind machine can take-up two copper rods.
6,Cooling-water system
The cooling water system is a cycling system. It can supply 0.2-0.4Mpa cooling water for freezer, water jacket, coil. It is consist of 150M3 water pool, water pump, tube and cooling water tower. The temperature of water supplied to the system is 20-30 and the quantity of water flow is 50 M3/H7,Electrical system .The electrical system is consist of electrical power and control system.
7.Electrical system
The electrical power system supply the energy to every inductor through the power cabinets. The control system control the combined furnace, main machine, double-head wind machine and cooling water system pledging them to work in order. The control system of combined furnace is consist of melting furnace system and holding furnace system. The melting furnace operation cabinet and holding furnace operation cabinet are installed near the system.
8,Charging system
The system can charging whole piece of copper plate.
9,Thermosister
The thermosister is consist of temperature of copper liquid and temperature of cooling water.
The casting machine is capable of producing directly
from electrolytic copper to bright and long oxygen-free copper rod , copper tube, flat copper bar and other special shaped copper material
. As compared with the black copper rod produced by traditional mangler from copper ingot, the rod produced by this new up-ward continuous casting technology has its advantage of
better quality, low production cost, low investment and no pollution in production
.
The composition of the system
1,Induction furnace
The induction furnace is consist of furnace body, furnace frame and inductor. The outside of the furnace body is steel structure and the inside is consist of fire-clay brick and quartz sand. The function of the furnace frame is support-ing the whole furnace. The furnace is fixed on the base by the foot screw. The inductor is made up of coil, water jacket, iron core and copper-ring. There are coils with water-jacket at the high voltage side. The voltage is adjustable step by step from 90V to 420V.There are short-circuit copper rings at the low-voltage side. After set up an electric circuit, it can emerge big current flow in the copper ring with the electromagnetic induction. The big current flow can melt the copper ring and electrolytic copper putted into the furnace. The water jacket and coil is cooled by the water. The cooling water is cycling and supplied by the cooling water system.
2.Continuous casting machine
The continuous casting machine is the main part of the system. It is consist of drawing mechanism, following mechanism of liquid level and freezer.
The drawing mechanism is made up of A.C. servo motor, two groups of drawing rollers and so on..It can produce 0-1000 times interval rotation per minute and draw up the copper rod continuous by the drawing rollers. One of the drawing mechanisms can drive 5 drawing rollers and draw up 5 copper rods.The following mechanism of liquid level guarantee that the deep of the freezer inserting into the copper liquid is relative stable.The freezer can cool the copper liquid into copper rod by heat exchange. Every freezer can be changed and controlled alone.
3, Frame of guide pulley
The frame of guide pulley is installed above the continuous casting machine. It is consist of platform, support, vertical guide pulley and cylinder. It can lead the copper rod to the every double-head wind machine without disturbance.
4,Limited device
The caging device are two devices installed between the frame of guide pulley and double-head wind machine. It is fitted with 5 groups of 24V up and down spacing which can control the speed of double-head wind machine by the electrical signal produced by the copper rod touching the up or down spacing.
5,Double-head wind machine
The double-head wind machine is made up of the drawing rollers, revolving chassis and spooling take-up unit. Every double-head wind machine can take-up two copper rods.
6,Cooling-water system
The cooling water system is a cycling system. It can supply 0.2-0.4Mpa cooling water for freezer, water jacket, coil. It is consist of 150M3 water pool, water pump, tube and cooling water tower. The temperature of water supplied to the system is 20-30 and the quantity of water flow is 50 M3/H7,Electrical system .The electrical system is consist of electrical power and control system.
7.Electrical system
The electrical power system supply the energy to every inductor through the power cabinets. The control system control the combined furnace, main machine, double-head wind machine and cooling water system pledging them to work in order. The control system of combined furnace is consist of melting furnace system and holding furnace system. The melting furnace operation cabinet and holding furnace operation cabinet are installed near the system.
8,Charging system
The system can charging whole piece of copper plate.
9,Thermosister
The thermosister is consist of temperature of copper liquid and temperature of cooling water.
upward continuous casting machine for oxygen-free copper rod
The casting machine is capable of producing directly from electrolytic copper to bright and long oxygen-free copper rod.
The casting machine is capable of producing directly
from electrolytic copper to bright and long oxygen-free copper rod , copper tube, flat copper bar and other special shaped copper material
. The capacity of the system is in 5 models of 1,000 tons, 2,000tons, 3,000tons, 4,000-5,000tons and 8,000-10,000tons annually, and the copper rod diameters will be 8 mm, 14.4 mm, 17 mm, 20 mm and 25mm. As compared with the black copper rod produced by traditional mangler from copper ingot, the rod produced by this new up-ward continuous casting technology has its advantage of
better quality, low production cost, low investment and no pollution in production
.
The composition of the system
1,Induction furnace
The induction furnace is consist of furnace body, furnace frame and inductor. The outside of the furnace body is steel structure and the inside is consist of fire-clay brick and quartz sand. The function of the furnace frame is support-ing the whole furnace. The furnace is fixed on the base by the foot screw. The inductor is made up of coil, water jacket, iron core and copper-ring. There are coils with water-jacket at the high voltage side. The voltage is adjustable step by step from 90V to 420V.There are short-circuit copper rings at the low-voltage side. After set up an electric circuit, it can emerge big current flow in the copper ring with the electromagnetic induction. The big current flow can melt the copper ring and electrolytic copper putted into the furnace. The water jacket and coil is cooled by the water. The cooling water is cycling and supplied by the cooling water system.
2.Continuous casting machine
The continuous casting machine is the main part of the system. It is consist of drawing mechanism, following mechanism of liquid level and freezer.
The drawing mechanism is made up of A.C. servo motor, two groups of drawing rollers and so on..It can produce 0-1000 times interval rotation per minute and draw up the copper rod continuous by the drawing rollers. One of the drawing mechanisms can drive 5 drawing rollers and draw up 5 copper rods.The following mechanism of liquid level guarantee that the deep of the freezer inserting into the copper liquid is relative stable.The freezer can cool the copper liquid into copper rod by heat exchange. Every freezer can be changed and controlled alone.
3, Frame of guide pulley
The frame of guide pulley is installed above the continuous casting machine. It is consist of platform, support, vertical guide pulley and cylinder. It can lead the copper rod to the every double-head wind machine without disturbance.
4,Limited device
The caging device are two devices installed between the frame of guide pulley and double-head wind machine. It is fitted with 5 groups of 24V up and down spacing which can control the speed of double-head wind machine by the electrical signal produced by the copper rod touching the up or down spacing.
5,Double-head wind machine
The double-head wind machine is made up of the drawing rollers, revolving chassis and spooling take-up unit. Every double-head wind machine can take-up two copper rods.
6,Cooling-water system
The cooling water system is a cycling system. It can supply 0.2-0.4Mpa cooling water for freezer, water jacket, coil. It is consist of 150M3 water pool, water pump, tube and cooling water tower. The temperature of water supplied to the system is 20-30 and the quantity of water flow is 50 M3/H7,Electrical system .The electrical system is consist of electrical power and control system.
7.Electrical system
The electrical power system supply the energy to every inductor through the power cabinets. The control system control the combined furnace, main machine, double-head wind machine and cooling water system pledging them to work in order. The control system of combined furnace is consist of melting furnace system and holding furnace system. The melting furnace operation cabinet and holding furnace operation cabinet are installed near the system.
8,Charging system
The system can charging whole piece of copper plate.
9,Thermosister
The thermosister is consist of temperature of copper liquid and temperature of cooling water.
The casting machine is capable of producing directly
from electrolytic copper to bright and long oxygen-free copper rod , copper tube, flat copper bar and other special shaped copper material
. The capacity of the system is in 5 models of 1,000 tons, 2,000tons, 3,000tons, 4,000-5,000tons and 8,000-10,000tons annually, and the copper rod diameters will be 8 mm, 14.4 mm, 17 mm, 20 mm and 25mm. As compared with the black copper rod produced by traditional mangler from copper ingot, the rod produced by this new up-ward continuous casting technology has its advantage of
better quality, low production cost, low investment and no pollution in production
.
The composition of the system
1,Induction furnace
The induction furnace is consist of furnace body, furnace frame and inductor. The outside of the furnace body is steel structure and the inside is consist of fire-clay brick and quartz sand. The function of the furnace frame is support-ing the whole furnace. The furnace is fixed on the base by the foot screw. The inductor is made up of coil, water jacket, iron core and copper-ring. There are coils with water-jacket at the high voltage side. The voltage is adjustable step by step from 90V to 420V.There are short-circuit copper rings at the low-voltage side. After set up an electric circuit, it can emerge big current flow in the copper ring with the electromagnetic induction. The big current flow can melt the copper ring and electrolytic copper putted into the furnace. The water jacket and coil is cooled by the water. The cooling water is cycling and supplied by the cooling water system.
2.Continuous casting machine
The continuous casting machine is the main part of the system. It is consist of drawing mechanism, following mechanism of liquid level and freezer.
The drawing mechanism is made up of A.C. servo motor, two groups of drawing rollers and so on..It can produce 0-1000 times interval rotation per minute and draw up the copper rod continuous by the drawing rollers. One of the drawing mechanisms can drive 5 drawing rollers and draw up 5 copper rods.The following mechanism of liquid level guarantee that the deep of the freezer inserting into the copper liquid is relative stable.The freezer can cool the copper liquid into copper rod by heat exchange. Every freezer can be changed and controlled alone.
3, Frame of guide pulley
The frame of guide pulley is installed above the continuous casting machine. It is consist of platform, support, vertical guide pulley and cylinder. It can lead the copper rod to the every double-head wind machine without disturbance.
4,Limited device
The caging device are two devices installed between the frame of guide pulley and double-head wind machine. It is fitted with 5 groups of 24V up and down spacing which can control the speed of double-head wind machine by the electrical signal produced by the copper rod touching the up or down spacing.
5,Double-head wind machine
The double-head wind machine is made up of the drawing rollers, revolving chassis and spooling take-up unit. Every double-head wind machine can take-up two copper rods.
6,Cooling-water system
The cooling water system is a cycling system. It can supply 0.2-0.4Mpa cooling water for freezer, water jacket, coil. It is consist of 150M3 water pool, water pump, tube and cooling water tower. The temperature of water supplied to the system is 20-30 and the quantity of water flow is 50 M3/H7,Electrical system .The electrical system is consist of electrical power and control system.
7.Electrical system
The electrical power system supply the energy to every inductor through the power cabinets. The control system control the combined furnace, main machine, double-head wind machine and cooling water system pledging them to work in order. The control system of combined furnace is consist of melting furnace system and holding furnace system. The melting furnace operation cabinet and holding furnace operation cabinet are installed near the system.
8,Charging system
The system can charging whole piece of copper plate.
9,Thermosister
The thermosister is consist of temperature of copper liquid and temperature of cooling water.
upward continuous casting machine line
OFC Upcast Line
-Original manufacturer with own r&d team
-Good reputation allover the world
-Upward method
-No pollution
Upward Continuous Casting Machine Line
I, Introduction
Benteng brand noted continuous casting machine is produced by professtional designers through indepentent design and research and gained good reputation both at home and abroad.
II,Machine image
III, The line main technical parameters
Model
Annual Output
(tpyr)
Casting Strands
Qty
Power Consumption
(KW)
Installed Capacity
(KVA)
Rod Dia
(mm)
SYLZ-3000T
3000
6
220
300
8-30
SYLZ-5000T
5000
8
290
330
8-30
SYLZ-6000T
6000
10 / 12
300
350
8-30
SYLZ-10000T
10000
16
450
600
8-30
SYLZ-12000T
12000
20
480
600
8-30
SYLZ-15000T
15000
24
700
900
8-30
NOTE: The up casting line can be tailor-made to suit your requirments.
-Original manufacturer with own r&d team
-Good reputation allover the world
-Upward method
-No pollution
Upward Continuous Casting Machine Line
I, Introduction
Benteng brand noted continuous casting machine is produced by professtional designers through indepentent design and research and gained good reputation both at home and abroad.
II,Machine image
III, The line main technical parameters
Model
Annual Output
(tpyr)
Casting Strands
Qty
Power Consumption
(KW)
Installed Capacity
(KVA)
Rod Dia
(mm)
SYLZ-3000T
3000
6
220
300
8-30
SYLZ-5000T
5000
8
290
330
8-30
SYLZ-6000T
6000
10 / 12
300
350
8-30
SYLZ-10000T
10000
16
450
600
8-30
SYLZ-12000T
12000
20
480
600
8-30
SYLZ-15000T
15000
24
700
900
8-30
NOTE: The up casting line can be tailor-made to suit your requirments.
upward continuous casting machine
1.dia of casting rod:8mm-25mm
2.working hours of year:7200hrs
3.feeding type:electric hoist
Annual productivity
:5000 tons
Stove structure
:combined stove of 3 parts(2 melting stoves and 1 insulting stove)
Number of casting rods
:10
Diameter of casting rod
:8mm
Upward going speeding
: 0~3000mm/min
Annual working hour
s:7200 hrs
Liquid level tracing precision
: ±2mm
Specification of coils:
φ700mm×φ1500mm
Copper melting speed:
650kg/h
Power consumption of copper melting:
320kwh/ton
Winding mode
: the winding speed,curve rate and rotary speed of the bobbins are automatically under the control of frequency variation speed adjuster
Material feeding mode
:electric hoisting block or electric arm for the feeding of whole lumps of electrolytic copper
Driving mode of upward movement
:AC seveo motor;transmission chain is a zero clearace synchronized tooth belt.
Fixture mode of the upward going copper rod
: cylinder fixture
Operation interface
:salve motor controlled by independent touch screen, computerized data recording,alarming and displaying systems are available.
MOQ
:1 SET
2.working hours of year:7200hrs
3.feeding type:electric hoist
Annual productivity
:5000 tons
Stove structure
:combined stove of 3 parts(2 melting stoves and 1 insulting stove)
Number of casting rods
:10
Diameter of casting rod
:8mm
Upward going speeding
: 0~3000mm/min
Annual working hour
s:7200 hrs
Liquid level tracing precision
: ±2mm
Specification of coils:
φ700mm×φ1500mm
Copper melting speed:
650kg/h
Power consumption of copper melting:
320kwh/ton
Winding mode
: the winding speed,curve rate and rotary speed of the bobbins are automatically under the control of frequency variation speed adjuster
Material feeding mode
:electric hoisting block or electric arm for the feeding of whole lumps of electrolytic copper
Driving mode of upward movement
:AC seveo motor;transmission chain is a zero clearace synchronized tooth belt.
Fixture mode of the upward going copper rod
: cylinder fixture
Operation interface
:salve motor controlled by independent touch screen, computerized data recording,alarming and displaying systems are available.
MOQ
:1 SET
upward continuous casting machinery
OFC vertical machine
-Direct manufacturer
-Supply all knids of spare parts
-Upward method
-No pollution
Upward continuous casting machinery
I, Introduction
Benteng brand noted continuous casting machine is produced by professtional designers through indepentent design and research and gained the reputation both at home and abroad.
II, Flow Process
III, Image
IV,Advantages
i) Stable product quality;
ii) Removable inductor maintain easily;
iII) PLC controlling, and servo motor driven system;
Iv) Automatic collecting,& single plate weight over 3 TONS;
v) Manpower: 2 persons each shift.
All enquiries will be replied within 24 hours.U
-Direct manufacturer
-Supply all knids of spare parts
-Upward method
-No pollution
Upward continuous casting machinery
I, Introduction
Benteng brand noted continuous casting machine is produced by professtional designers through indepentent design and research and gained the reputation both at home and abroad.
II, Flow Process
III, Image
IV,Advantages
i) Stable product quality;
ii) Removable inductor maintain easily;
iII) PLC controlling, and servo motor driven system;
Iv) Automatic collecting,& single plate weight over 3 TONS;
v) Manpower: 2 persons each shift.
All enquiries will be replied within 24 hours.U
upward copper casting machine
1 furnace:induction combined
2 annual capacity:1000tons-12000tons
3 oxide content:<10ppm
4 conductivity:100-102%IACS
Annual productivity
:5000 tons
Stove structure
:combined stove of 3 parts(2 melting stoves and 1 insulting stove)
Number of casting rods
:10
Diameter of casting rod
:8mm
Upward going speeding
: 0~3000mm/min
Annual working hour
s:7200 hrs
Liquid level tracing precision
: ±2mm
Specification of coils:
φ700mm×φ1500mm
Copper melting speed:
650kg/h
Power consumption of copper melting:
320kwh/ton
Winding mode
: the winding speed,curve rate and rotary speed of the bobbins are automatically under the control of frequency variation speed adjuster
Material feeding mode
:electric hoisting block or electric arm for the feeding of whole lumps of electrolytic copper
Driving mode of upward movement
:AC slaver motor;transmission chain is a zero clearace synchronized tooth belt.
Fixture mode of the upward going copper rod
: cylinder fixture
Operation interface
:salve motor controlled by independent touch screen, computerized data recording,alarming and displaying systems are available.
MOQ
:1 SET
2 annual capacity:1000tons-12000tons
3 oxide content:<10ppm
4 conductivity:100-102%IACS
Annual productivity
:5000 tons
Stove structure
:combined stove of 3 parts(2 melting stoves and 1 insulting stove)
Number of casting rods
:10
Diameter of casting rod
:8mm
Upward going speeding
: 0~3000mm/min
Annual working hour
s:7200 hrs
Liquid level tracing precision
: ±2mm
Specification of coils:
φ700mm×φ1500mm
Copper melting speed:
650kg/h
Power consumption of copper melting:
320kwh/ton
Winding mode
: the winding speed,curve rate and rotary speed of the bobbins are automatically under the control of frequency variation speed adjuster
Material feeding mode
:electric hoisting block or electric arm for the feeding of whole lumps of electrolytic copper
Driving mode of upward movement
:AC slaver motor;transmission chain is a zero clearace synchronized tooth belt.
Fixture mode of the upward going copper rod
: cylinder fixture
Operation interface
:salve motor controlled by independent touch screen, computerized data recording,alarming and displaying systems are available.
MOQ
:1 SET
upward copper rod continuous casting machinery
The upward copper rod continuous casting machinery is capable of producing from cathode to bright and long oxygenfree copper rod
The upward copper rod continuous casting machinery is capable of producing directly
from cathode to bright and long oxygen-free copper rod , copper tube, flat copper bar and other special shaped copper material
. As compared with the black copper rod produced by traditional mangler from copper ingot, the rod produced by this new up-ward continuous casting technology has its advantage of
better quality, low production cost, low investment and no pollution in production
.
The composition of the system
1,Induction furnace
The induction furnace is consist of furnace body, furnace frame and inductor. The outside of the furnace body is steel structure and the inside is consist of fire-clay brick and quartz sand. The function of the furnace frame is support-ing the whole furnace. The furnace is fixed on the base by the foot screw. The inductor is made up of coil, water jacket, iron core and copper-ring. There are coils with water-jacket at the high voltage side. The voltage is adjustable step by step from 90V to 420V.There are short-circuit copper rings at the low-voltage side. After set up an electric circuit, it can emerge big current flow in the copper ring with the electromagnetic induction. The big current flow can melt the copper ring and electrolytic copper putted into the furnace. The water jacket and coil is cooled by the water. The cooling water is cycling and supplied by the cooling water system.
2.Continuous casting machine
The continuous casting machine is the main part of the system. It is consist of drawing mechanism, following mechanism of liquid level and freezer.
The drawing mechanism is made up of A.C. servo motor, two groups of drawing rollers and so on..It can produce 0-1000 times interval rotation per minute and draw up the copper rod continuous by the drawing rollers. One of the drawing mechanisms can drive 5 drawing rollers and draw up 5 copper rods.The following mechanism of liquid level guarantee that the deep of the freezer inserting into the copper liquid is relative stable.The freezer can cool the copper liquid into copper rod by heat exchange. Every freezer can be changed and controlled alone.
3, Frame of guide pulley
The frame of guide pulley is installed above the continuous casting machine. It is consist of platform, support, vertical guide pulley and cylinder. It can lead the copper rod to the every double-head wind machine without disturbance.
4,Limited device
The caging device are two devices installed between the frame of guide pulley and double-head wind machine. It is fitted with 5 groups of 24V up and down spacing which can control the speed of double-head wind machine by the electrical signal produced by the copper rod touching the up or down spacing.
5,Double-head wind machine
The double-head wind machine is made up of the drawing rollers, revolving chassis and spooling take-up unit. Every double-head wind machine can take-up two copper rods.
6,Cooling-water system
The cooling water system is a cycling system. It can supply 0.2-0.4Mpa cooling water for freezer, water jacket, coil. It is consist of 150M3 water pool, water pump, tube and cooling water tower. The temperature of water supplied to the system is 20-30 and the quantity of water flow is 50 M3/H7,Electrical system .The electrical system is consist of electrical power and control system.
7.Electrical system
The electrical power system supply the energy to every inductor through the power cabinets. The control system control the combined furnace, main machine, double-head wind machine and cooling water system pledging them to work in order. The control system of combined furnace is consist of melting furnace system and holding furnace system. The melting furnace operation cabinet and holding furnace operation cabinet are installed near the system.
8,Charging system
The system can charging whole piece of copper plate.
9,Thermosister
The thermosister is consist of temperature of copper liquid and temperature of cooling water.
The upward copper rod continuous casting machinery is capable of producing directly
from cathode to bright and long oxygen-free copper rod , copper tube, flat copper bar and other special shaped copper material
. As compared with the black copper rod produced by traditional mangler from copper ingot, the rod produced by this new up-ward continuous casting technology has its advantage of
better quality, low production cost, low investment and no pollution in production
.
The composition of the system
1,Induction furnace
The induction furnace is consist of furnace body, furnace frame and inductor. The outside of the furnace body is steel structure and the inside is consist of fire-clay brick and quartz sand. The function of the furnace frame is support-ing the whole furnace. The furnace is fixed on the base by the foot screw. The inductor is made up of coil, water jacket, iron core and copper-ring. There are coils with water-jacket at the high voltage side. The voltage is adjustable step by step from 90V to 420V.There are short-circuit copper rings at the low-voltage side. After set up an electric circuit, it can emerge big current flow in the copper ring with the electromagnetic induction. The big current flow can melt the copper ring and electrolytic copper putted into the furnace. The water jacket and coil is cooled by the water. The cooling water is cycling and supplied by the cooling water system.
2.Continuous casting machine
The continuous casting machine is the main part of the system. It is consist of drawing mechanism, following mechanism of liquid level and freezer.
The drawing mechanism is made up of A.C. servo motor, two groups of drawing rollers and so on..It can produce 0-1000 times interval rotation per minute and draw up the copper rod continuous by the drawing rollers. One of the drawing mechanisms can drive 5 drawing rollers and draw up 5 copper rods.The following mechanism of liquid level guarantee that the deep of the freezer inserting into the copper liquid is relative stable.The freezer can cool the copper liquid into copper rod by heat exchange. Every freezer can be changed and controlled alone.
3, Frame of guide pulley
The frame of guide pulley is installed above the continuous casting machine. It is consist of platform, support, vertical guide pulley and cylinder. It can lead the copper rod to the every double-head wind machine without disturbance.
4,Limited device
The caging device are two devices installed between the frame of guide pulley and double-head wind machine. It is fitted with 5 groups of 24V up and down spacing which can control the speed of double-head wind machine by the electrical signal produced by the copper rod touching the up or down spacing.
5,Double-head wind machine
The double-head wind machine is made up of the drawing rollers, revolving chassis and spooling take-up unit. Every double-head wind machine can take-up two copper rods.
6,Cooling-water system
The cooling water system is a cycling system. It can supply 0.2-0.4Mpa cooling water for freezer, water jacket, coil. It is consist of 150M3 water pool, water pump, tube and cooling water tower. The temperature of water supplied to the system is 20-30 and the quantity of water flow is 50 M3/H7,Electrical system .The electrical system is consist of electrical power and control system.
7.Electrical system
The electrical power system supply the energy to every inductor through the power cabinets. The control system control the combined furnace, main machine, double-head wind machine and cooling water system pledging them to work in order. The control system of combined furnace is consist of melting furnace system and holding furnace system. The melting furnace operation cabinet and holding furnace operation cabinet are installed near the system.
8,Charging system
The system can charging whole piece of copper plate.
9,Thermosister
The thermosister is consist of temperature of copper liquid and temperature of cooling water.
upward copper tube continuous casting machine
With this advanced casting method, the length of copper tube could be over 5000m.
The up-drawing continuous casting system is capable of producing directly from cathode copper to bright and long oxygen-free Copper tube embryo. The annual output of this system is range from 1000 MT to 3000MT.
Specification(straight):
Type
Annual Output
Casting Strands
Capacity
Running Power
Size
TSLZ·G-Φ80-100*6-8
1000MT
2
160KW
120KW
30*8*7
TSLZ·G-Φ170-260*6-8
1500MT
4
160KW
140KW
30*8*7
TSLZ·G-Φ170-260*6-8
2000MT
6
180KW
160KW
30*8*7
TSLZ·G-Φ170-260*6-8
2500MT
6
220KW
180KW
30*8*7
TSLZ·G-Φ170-260*6-8
3000MT
6
250KW
200KW
30*8*7
Specification(coiled):
Type
Annual Output
Casting Strands
Capacity
Running Power
Size
TSLZ·G-Φ30-50*2-2.5
1000MT
6
160KW
120KW
30*8*7
TSLZ·G-Φ170-260*6-8
1500MT
8
160KW
140KW
33*8*7
TSLZ·G-Φ170-260*6-8
2000MT
10
180KW
160KW
36*8*7
TSLZ·G-Φ170-260*6-8
2500MT
12
220KW
180KW
30*8*7
TSLZ·G-Φ170-260*6-8
3000MT
16
250KW
200KW
33*8*7
Material requirement:
Cathode Copper
Copper Content: 99.96% Min.
Charcoal
Moisture: 5% Max.
Graphite
3299
Parameter:
Oxygen
8ppm
Density
8.92
Intension
170% Min.
Elongation
37% Min.
Water requirement: No scale. Standard of soft water.
Power requirement: 380V 50HZ (Special requirement should be specified in the contract)
The up-drawing continuous casting system is capable of producing directly from cathode copper to bright and long oxygen-free Copper tube embryo. The annual output of this system is range from 1000 MT to 3000MT.
Specification(straight):
Type
Annual Output
Casting Strands
Capacity
Running Power
Size
TSLZ·G-Φ80-100*6-8
1000MT
2
160KW
120KW
30*8*7
TSLZ·G-Φ170-260*6-8
1500MT
4
160KW
140KW
30*8*7
TSLZ·G-Φ170-260*6-8
2000MT
6
180KW
160KW
30*8*7
TSLZ·G-Φ170-260*6-8
2500MT
6
220KW
180KW
30*8*7
TSLZ·G-Φ170-260*6-8
3000MT
6
250KW
200KW
30*8*7
Specification(coiled):
Type
Annual Output
Casting Strands
Capacity
Running Power
Size
TSLZ·G-Φ30-50*2-2.5
1000MT
6
160KW
120KW
30*8*7
TSLZ·G-Φ170-260*6-8
1500MT
8
160KW
140KW
33*8*7
TSLZ·G-Φ170-260*6-8
2000MT
10
180KW
160KW
36*8*7
TSLZ·G-Φ170-260*6-8
2500MT
12
220KW
180KW
30*8*7
TSLZ·G-Φ170-260*6-8
3000MT
16
250KW
200KW
33*8*7
Material requirement:
Cathode Copper
Copper Content: 99.96% Min.
Charcoal
Moisture: 5% Max.
Graphite
3299
Parameter:
Oxygen
8ppm
Density
8.92
Intension
170% Min.
Elongation
37% Min.
Water requirement: No scale. Standard of soft water.
Power requirement: 380V 50HZ (Special requirement should be specified in the contract)
1000 ton horizontal aluminum alloy die casting machine
1.1000 ton horizontal aluminum alloy die casting machine
2.cool /cold chamber die casting machine
3.world-famousfor component
& 1000 ton horizontal aluminum alloy die casting machine,horizontal cool chamber die casting machine,horizontal cold chamber die casting machine,horizontal die casting machine aluminum 1000 ton machine
1. Auto die casting with high speed.
2. We choose world-famous YUKEN and TOKIMEC products for the hydraulic system.
3. We use the advanced PLC from Mitsubishi for the control system.
4. Our machine is easy to operate, stable in performance, simple in maintenance, safe and reliable.
& Our die casting machine has passed the inspection from National Foundry Forging Machine Quality Supervision Inspection Center, their criteria are conformity with the standard of industry and country.
& With more than 15 years of experience in die casting machine, we have become one of best manufacture in this field.
& horizontal aluminum 1000 ton die casting machine technical parameter as follow
Projects
UNIT
DCC1000-A
Clamping force
KN
10000
Clamping stroke
mm
880
Mould board size
mm
1620×1620
Inner space between tie bar
mm
1030×1030
Tie bar diameter
mm
200
Mould thickness
mm
450-1150
Working oil pressure
kgf/cm
2
160
Injection force
KN
310
Increase force
KN
820
Injection stroke
mm
820
Hammerhead ejection length
mm
320
Injection place
mm
0-300
Hammer diameter
mm
90,100,110,120
Injection weight
kg
9.5,11.7,14.2,17
Foundry pressure
kgf/cm2
770-1380
Foundry acreage
cm2
7300-1305
Maximum foundry acreage
cm2
2500
Ejector powder
KN
500
Ejector stroke
mm
210
Oil pump mechanical
HP/KW
60/45
Oil box capacity
L
1400
Machine size
mm
11000×3500×4350
Machine weight
Kg
65500
2.cool /cold chamber die casting machine
3.world-famousfor component
& 1000 ton horizontal aluminum alloy die casting machine,horizontal cool chamber die casting machine,horizontal cold chamber die casting machine,horizontal die casting machine aluminum 1000 ton machine
1. Auto die casting with high speed.
2. We choose world-famous YUKEN and TOKIMEC products for the hydraulic system.
3. We use the advanced PLC from Mitsubishi for the control system.
4. Our machine is easy to operate, stable in performance, simple in maintenance, safe and reliable.
& Our die casting machine has passed the inspection from National Foundry Forging Machine Quality Supervision Inspection Center, their criteria are conformity with the standard of industry and country.
& With more than 15 years of experience in die casting machine, we have become one of best manufacture in this field.
& horizontal aluminum 1000 ton die casting machine technical parameter as follow
Projects
UNIT
DCC1000-A
Clamping force
KN
10000
Clamping stroke
mm
880
Mould board size
mm
1620×1620
Inner space between tie bar
mm
1030×1030
Tie bar diameter
mm
200
Mould thickness
mm
450-1150
Working oil pressure
kgf/cm
2
160
Injection force
KN
310
Increase force
KN
820
Injection stroke
mm
820
Hammerhead ejection length
mm
320
Injection place
mm
0-300
Hammer diameter
mm
90,100,110,120
Injection weight
kg
9.5,11.7,14.2,17
Foundry pressure
kgf/cm2
770-1380
Foundry acreage
cm2
7300-1305
Maximum foundry acreage
cm2
2500
Ejector powder
KN
500
Ejector stroke
mm
210
Oil pump mechanical
HP/KW
60/45
Oil box capacity
L
1400
Machine size
mm
11000×3500×4350
Machine weight
Kg
65500
Automatic Cast Ball Production Line
1.The automatic cast ball prodution line is highly automatic and high-tech.
2.The automatic cast ball production line is researched and developed by ourselves.during all the operating process,it adopted the computer to control,which is more standard and high-efficiency.
3.Using this equipment is not only improve the quality of products,but also reduce the producing costs.
2.The automatic cast ball production line is researched and developed by ourselves.during all the operating process,it adopted the computer to control,which is more standard and high-efficiency.
3.Using this equipment is not only improve the quality of products,but also reduce the producing costs.
upword continuous casting machine
OFC Upcast Machine
-Original manufacturer with own r&d team
-Free cost of installation
-40days delivery
-No pollution
Upword continuous casting machine/Upward Continuous Casting Machine for oxygen-free copper rod
I, Introduction
Benteng brand noted continuous casting machine is produced by professtional designers through indepentent design and research and gained good reputation both at home and abroad.
II, The line main technical parameters
Model
Annual Output
(tpyr)
Casting Strands
Qty
Power Consumption
(KW)
Installed Capacity
(KVA)
Rod Dia
(mm)
SYLZ-3000T
3000
6
220
300
8-30
SYLZ-5000T
5000
8
290
330
8-30
SYLZ-6000T
6000
10 / 12
300
350
8-30
SYLZ-10000T
10000
16
450
600
8-30
SYLZ-12000T
12000
20
480
600
8-30
SYLZ-15000T
15000
24
700
900
8-30
NOTE: The up casting line can be produced by your requirments.
III,Flow chart
All enquiries will be answered within 24 hours!
-Original manufacturer with own r&d team
-Free cost of installation
-40days delivery
-No pollution
Upword continuous casting machine/Upward Continuous Casting Machine for oxygen-free copper rod
I, Introduction
Benteng brand noted continuous casting machine is produced by professtional designers through indepentent design and research and gained good reputation both at home and abroad.
II, The line main technical parameters
Model
Annual Output
(tpyr)
Casting Strands
Qty
Power Consumption
(KW)
Installed Capacity
(KVA)
Rod Dia
(mm)
SYLZ-3000T
3000
6
220
300
8-30
SYLZ-5000T
5000
8
290
330
8-30
SYLZ-6000T
6000
10 / 12
300
350
8-30
SYLZ-10000T
10000
16
450
600
8-30
SYLZ-12000T
12000
20
480
600
8-30
SYLZ-15000T
15000
24
700
900
8-30
NOTE: The up casting line can be produced by your requirments.
III,Flow chart
All enquiries will be answered within 24 hours!
vacuum producing plant
Rational use of vacuum pump
1, vacuum pump and the shorter distances containers, pipe bend fewer is better than that of the
Rational use of vacuum pump
1, vacuum pump and the shorter distances containers, pipe bend fewer is better than that of the pump shall be imported pipeline, pipe line entrance export should avoid large resistance is caused by factors such as exports climbing, right, in turn, etc.
2, with import and export products shall be with the diameter of pipe diameter, such as import and export, import and export with vacuum system smaller diameter can be small, but took not less than 70% of the vacuum tube diameter of import and export, and the diameter of pipe should be bigger than or equal to the entrance tube diameter.
3 the bend pipe, should be smooth transition of feed pump, valve installation way is used to regulate the water into water, how to enter into a vacuum, adjustment of water when the pointer table by observing the vacuum to control valve.
1, vacuum pump and the shorter distances containers, pipe bend fewer is better than that of the
Rational use of vacuum pump
1, vacuum pump and the shorter distances containers, pipe bend fewer is better than that of the pump shall be imported pipeline, pipe line entrance export should avoid large resistance is caused by factors such as exports climbing, right, in turn, etc.
2, with import and export products shall be with the diameter of pipe diameter, such as import and export, import and export with vacuum system smaller diameter can be small, but took not less than 70% of the vacuum tube diameter of import and export, and the diameter of pipe should be bigger than or equal to the entrance tube diameter.
3 the bend pipe, should be smooth transition of feed pump, valve installation way is used to regulate the water into water, how to enter into a vacuum, adjustment of water when the pointer table by observing the vacuum to control valve.
vacuum air proof molding line
high automatic , high quality of casting , high precision , cleanse , save energy , inprove work surrounding
Molding line include foundry-model transport, box-bunting, box-poking box-return orbit, pneumatic, control system, electric system. It include pressurize and open mechanization .molding line that according to foundry-model transport. the company have produce many set of molding line , it include Z124 ,Z145,Z146,Z149,ZS0806,Z1410.sand-box size of the most specs molding line has achieved 3000---1900mm
Molding line include foundry-model transport, box-bunting, box-poking box-return orbit, pneumatic, control system, electric system. It include pressurize and open mechanization .molding line that according to foundry-model transport. the company have produce many set of molding line , it include Z124 ,Z145,Z146,Z149,ZS0806,Z1410.sand-box size of the most specs molding line has achieved 3000---1900mm
vacuum air proof molding line
1 high automatic
2 high quality of casting
3 high precision
4 save energy
5 improve work surrounding
Vacuum airproof molding is a new type plastic techniques, and adopt signenleness dry and (no water, bound tagger), than it is hot up molding, pressurized sand-box, take out the air ,so the sand is tighten. The course is physics molding way.
Vacuum air proof molding have the excellence of high automatic ,high quality casting , high precision ,cleanse ,save energy , improve work surrounding in the recently years , it is speedy developed .
We have the world-leading vacuum airproof molding technique; we can produce vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ton-thousand vacuum airproof molding line that is the biggest in the mainland at present.
Molding line include foundry-model transport, box-bunting, box-poking box-return orbit, pneumatic, control system, electric system. It include pressurize and open mechanization .molding line that according to foundry-model transport. the company have produce many set of molding line , it include Z124 ,Z145,Z146,Z149,ZS0806,Z1410.sand-box size of the most specs molding line has achieved 3000---1900mm
2 high quality of casting
3 high precision
4 save energy
5 improve work surrounding
Vacuum airproof molding is a new type plastic techniques, and adopt signenleness dry and (no water, bound tagger), than it is hot up molding, pressurized sand-box, take out the air ,so the sand is tighten. The course is physics molding way.
Vacuum air proof molding have the excellence of high automatic ,high quality casting , high precision ,cleanse ,save energy , improve work surrounding in the recently years , it is speedy developed .
We have the world-leading vacuum airproof molding technique; we can produce vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ton-thousand vacuum airproof molding line that is the biggest in the mainland at present.
Molding line include foundry-model transport, box-bunting, box-poking box-return orbit, pneumatic, control system, electric system. It include pressurize and open mechanization .molding line that according to foundry-model transport. the company have produce many set of molding line , it include Z124 ,Z145,Z146,Z149,ZS0806,Z1410.sand-box size of the most specs molding line has achieved 3000---1900mm
vacuum air pump
Rational use of vacuum pump
1, vacuum pump and the shorter distances containers, pipe bend fewer is better than that of the
Rational use of vacuum pump
1, vacuum pump and the shorter distances containers, pipe bend fewer is better than that of the pump shall be imported pipeline, pipe line entrance export should avoid large resistance is caused by factors such as exports climbing, right, in turn, etc.
2, with import and export products shall be with the diameter of pipe diameter, such as import and export, import and export with vacuum system smaller diameter can be small, but took not less than 70% of the vacuum tube diameter of import and export, and the diameter of pipe should be bigger than or equal to the entrance tube diameter.
3 the bend pipe, should be smooth transition of feed pump, valve installation way is used to regulate the water into water, how to enter into a vacuum, adjustment of water when the pointer table by observing the vacuum to control valve.
1, vacuum pump and the shorter distances containers, pipe bend fewer is better than that of the
Rational use of vacuum pump
1, vacuum pump and the shorter distances containers, pipe bend fewer is better than that of the pump shall be imported pipeline, pipe line entrance export should avoid large resistance is caused by factors such as exports climbing, right, in turn, etc.
2, with import and export products shall be with the diameter of pipe diameter, such as import and export, import and export with vacuum system smaller diameter can be small, but took not less than 70% of the vacuum tube diameter of import and export, and the diameter of pipe should be bigger than or equal to the entrance tube diameter.
3 the bend pipe, should be smooth transition of feed pump, valve installation way is used to regulate the water into water, how to enter into a vacuum, adjustment of water when the pointer table by observing the vacuum to control valve.
vacuum airproof molding line flask
1 high automatic
2 high quality of casting
3 high precision
4 save energy
5 improve work surrounding
Vacuum airproof molding is a new type plastic techniques, and adopt signenleness dry and (no water, bound tagger), than it is hot up molding, pressurized sand-box, take out the air ,so the sand is tighten. The course is physics molding way.
Vacuum air proof molding have the excellence of high automatic ,high quality casting , high precision ,cleanse ,save energy , improve work surrounding in the recently years , it is speedy developed .
We have the world-leading vacuum airproof molding technique; we can produce vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ton-thousand vacuum airproof molding line that is the biggest in the mainland at present.
Molding line include foundry-model transport, box-bunting, box-poking box-return orbit, pneumatic, control system, electric system. It include pressurize and open mechanization .molding line that according to foundry-model transport. the company have produce many set of molding line , it include Z124 ,Z145,Z146,Z149,ZS0806,Z1410.sand-box size of the most specs molding line has achieved 3000---1900mm
2 high quality of casting
3 high precision
4 save energy
5 improve work surrounding
Vacuum airproof molding is a new type plastic techniques, and adopt signenleness dry and (no water, bound tagger), than it is hot up molding, pressurized sand-box, take out the air ,so the sand is tighten. The course is physics molding way.
Vacuum air proof molding have the excellence of high automatic ,high quality casting , high precision ,cleanse ,save energy , improve work surrounding in the recently years , it is speedy developed .
We have the world-leading vacuum airproof molding technique; we can produce vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ton-thousand vacuum airproof molding line that is the biggest in the mainland at present.
Molding line include foundry-model transport, box-bunting, box-poking box-return orbit, pneumatic, control system, electric system. It include pressurize and open mechanization .molding line that according to foundry-model transport. the company have produce many set of molding line , it include Z124 ,Z145,Z146,Z149,ZS0806,Z1410.sand-box size of the most specs molding line has achieved 3000---1900mm
vacuum airproof molding line flask
1 high automatic
2 high quality of casting
3 high precision
4 save energy
5 improve work surrounding
Vacuum airproof molding is a new type plastic techniques, and adopt signenleness dry and (no water, bound tagger), than it is hot up molding, pressurized sand-box, take out the air ,so the sand is tighten. The course is physics molding way.
Vacuum air proof molding have the excellence of high automatic ,high quality casting , high precision ,cleanse ,save energy , improve work surrounding in the recently years , it is speedy developed .
We have the world-leading vacuum airproof molding technique; we can produce vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ton-thousand vacuum airproof molding line that is the biggest in the mainland at present.
Molding line include foundry-model transport, box-bunting, box-poking box-return orbit, pneumatic, control system, electric system. It include pressurize and open mechanization .molding line that according to foundry-model transport. the company have produce many set of molding line , it include Z124 ,Z145,Z146,Z149,ZS0806,Z1410.sand-box size of the most specs molding line has achieved 3000---1900mm
2 high quality of casting
3 high precision
4 save energy
5 improve work surrounding
Vacuum airproof molding is a new type plastic techniques, and adopt signenleness dry and (no water, bound tagger), than it is hot up molding, pressurized sand-box, take out the air ,so the sand is tighten. The course is physics molding way.
Vacuum air proof molding have the excellence of high automatic ,high quality casting , high precision ,cleanse ,save energy , improve work surrounding in the recently years , it is speedy developed .
We have the world-leading vacuum airproof molding technique; we can produce vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ton-thousand vacuum airproof molding line that is the biggest in the mainland at present.
Molding line include foundry-model transport, box-bunting, box-poking box-return orbit, pneumatic, control system, electric system. It include pressurize and open mechanization .molding line that according to foundry-model transport. the company have produce many set of molding line , it include Z124 ,Z145,Z146,Z149,ZS0806,Z1410.sand-box size of the most specs molding line has achieved 3000---1900mm
vacuum airproof molding line
1 high-Effcient blast wheel
2 beatiful appearance
3 compact confi-Guration
4 low noise,good
5 cleaning effect
Vacuum airproof molding is a new type plastic techniques, and adopt signenleness dry and (no water, bound tagger), than it is hot up molding, pressurized sand-box, take out the air ,so the sand is tighten. The course is physics molding way.
Vacuum air proof molding have the excellence of high automatic ,high quality casting , high precision ,cleanse ,save energy , improve work surrounding in the recently years , it is speedy developed .
We have the world-leading vacuum airproof molding technique; we can produce vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ton-thousand vacuum airproof molding line that is the biggest in the mainland at present.
Molding line include foundry-model transport, box-bunting, box-poking box-return orbit, pneumatic, control system, electric system. It include pressurize and open mechanization .molding line that according to foundry-model transport. the company have produce many set of molding line , it include Z124 ,Z145,Z146,Z149,ZS0806,Z1410.sand-box size of the most specs molding line has achieved 3000---1900mm
2 beatiful appearance
3 compact confi-Guration
4 low noise,good
5 cleaning effect
Vacuum airproof molding is a new type plastic techniques, and adopt signenleness dry and (no water, bound tagger), than it is hot up molding, pressurized sand-box, take out the air ,so the sand is tighten. The course is physics molding way.
Vacuum air proof molding have the excellence of high automatic ,high quality casting , high precision ,cleanse ,save energy , improve work surrounding in the recently years , it is speedy developed .
We have the world-leading vacuum airproof molding technique; we can produce vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ton-thousand vacuum airproof molding line that is the biggest in the mainland at present.
Molding line include foundry-model transport, box-bunting, box-poking box-return orbit, pneumatic, control system, electric system. It include pressurize and open mechanization .molding line that according to foundry-model transport. the company have produce many set of molding line , it include Z124 ,Z145,Z146,Z149,ZS0806,Z1410.sand-box size of the most specs molding line has achieved 3000---1900mm
Thursday, December 30, 2010
vacuum airproof molding line
1 high automatic
2 high quality of casting
3 high precision
4 save energy
5 improve work surrounding
Vacuum airproof molding is a new type plastic techniques, and adopt signenleness dry and (no water, bound tagger), than it is hot up molding, pressurized sand-box, take out the air ,so the sand is tighten. The course is physics molding way.
Vacuum air proof molding have the excellence of high automatic ,high quality casting , high precision ,cleanse ,save energy , improve work surrounding in the recently years , it is speedy developed .
We have the world-leading vacuum airproof molding technique; we can produce vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ton-thousand vacuum airproof molding line that is the biggest in the mainland at present.
Molding line include foundry-model transport, box-bunting, box-poking box-return orbit, pneumatic, control system, electric system. It include pressurize and open mechanization .molding line that according to foundry-model transport. the company have produce many set of molding line , it include Z124 ,Z145,Z146,Z149,ZS0806,Z1410.sand-box size of the most specs molding line has achieved 3000---1900mm
2 high quality of casting
3 high precision
4 save energy
5 improve work surrounding
Vacuum airproof molding is a new type plastic techniques, and adopt signenleness dry and (no water, bound tagger), than it is hot up molding, pressurized sand-box, take out the air ,so the sand is tighten. The course is physics molding way.
Vacuum air proof molding have the excellence of high automatic ,high quality casting , high precision ,cleanse ,save energy , improve work surrounding in the recently years , it is speedy developed .
We have the world-leading vacuum airproof molding technique; we can produce vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ton-thousand vacuum airproof molding line that is the biggest in the mainland at present.
Molding line include foundry-model transport, box-bunting, box-poking box-return orbit, pneumatic, control system, electric system. It include pressurize and open mechanization .molding line that according to foundry-model transport. the company have produce many set of molding line , it include Z124 ,Z145,Z146,Z149,ZS0806,Z1410.sand-box size of the most specs molding line has achieved 3000---1900mm
vacuum airproof molding line
Simple structure, strong, long service life , easy to operater
Our factory developed many kinds of molding , core-marketing and reclamation complete sets of equipment and every kind of conveying equipment forfuran resin-bonded ,sand and grease-hardening water glass sand . they are exquisitely made . with main components being imported , their performance keep up with the advanced levels of the same products abroad . Acording to the users requirements , we can provide the trunkey engineering of every kind of production line complete sets of equipment , including installation and trial run .
1 This machine adopts no-pit structure which is easy to be mounted and thus reduce investment cost.
2 Compact structures, high efficiency, good cleaning quality, reliable and safe operation, steady running.
3 The cleaning chamber is wear-resisting and impact resistant with good intensity by adopting High Chromium Manganese plate.
4 Double-hook structures, which can work independently, neither influencing the other, thus improve production efficiency. The hook adopts planet principle with simultaneous rotation and revolution. The processed work piece doesnt have male and female face.
Our factory developed many kinds of molding , core-marketing and reclamation complete sets of equipment and every kind of conveying equipment forfuran resin-bonded ,sand and grease-hardening water glass sand . they are exquisitely made . with main components being imported , their performance keep up with the advanced levels of the same products abroad . Acording to the users requirements , we can provide the trunkey engineering of every kind of production line complete sets of equipment , including installation and trial run .
1 This machine adopts no-pit structure which is easy to be mounted and thus reduce investment cost.
2 Compact structures, high efficiency, good cleaning quality, reliable and safe operation, steady running.
3 The cleaning chamber is wear-resisting and impact resistant with good intensity by adopting High Chromium Manganese plate.
4 Double-hook structures, which can work independently, neither influencing the other, thus improve production efficiency. The hook adopts planet principle with simultaneous rotation and revolution. The processed work piece doesnt have male and female face.
Automatic Cast Ball Production Line
1.The automatic cast ball prodution line is highly automatic and high-tech.
2.The automatic cast ball production line is researched and developed by ourselves.during all the operating process,it adopted the computer to control,which is more standard and high-efficiency.
3.Using this equipment is not only improve the quality of products,but also reduce the producing costs.
2.The automatic cast ball production line is researched and developed by ourselves.during all the operating process,it adopted the computer to control,which is more standard and high-efficiency.
3.Using this equipment is not only improve the quality of products,but also reduce the producing costs.
vacuum airproof molding line
is in good quality, less casting defects, easy mold release, and high precision in cast size.
vacuum molding (V shape molding) : is said vacuum negative pressure molding , is widely used in large foundry , Vacuum casting production line is a special casting method invented and developed in Japan in the 20th century, it uses the single sand with a plastic film by the heating to coat molding through venthole exhaust device .Sealed sand box and mould pumping into the vacuum, they can create the internal and external pressures error and to make the dry sand compact so that it can form the needed mould.
The vacuum molding line adopts single sand as the cast sand,use the plastic film to coat molding after heating ,pluming the vacuum make the inside and external pressure error to make the sand compact that it can from the needed mould .
vacuum molding (V shape molding) : is said vacuum negative pressure molding , is widely used in large foundry , Vacuum casting production line is a special casting method invented and developed in Japan in the 20th century, it uses the single sand with a plastic film by the heating to coat molding through venthole exhaust device .Sealed sand box and mould pumping into the vacuum, they can create the internal and external pressures error and to make the dry sand compact so that it can form the needed mould.
The vacuum molding line adopts single sand as the cast sand,use the plastic film to coat molding after heating ,pluming the vacuum make the inside and external pressure error to make the sand compact that it can from the needed mould .
vacuum airproof molding line
Characteristics: High-strength spring, easy installation, smooth operation, noise.
Technical characteristic:
1. Automatic molding Line.
2. It uses injection molding technology which is high efficiency. The casting quality is better than other machine, and hardness is over 80.
3. The hydraulic and pneumatic system uses famous standard components. Key parts use original imported components to improve its reliability.
4. The main hydro-cylinder uses composite cylinder structure which simplifies whole machine structure.
5. It uses proportional valve to control hydraulic motion.
6. The hydraulic system has control function of mold closing force and pressure sensor, which guarantees synchronism of main machine and auxiliary equipments, and avoids crushing sand molds.
Technical characteristic:
1. Automatic molding Line.
2. It uses injection molding technology which is high efficiency. The casting quality is better than other machine, and hardness is over 80.
3. The hydraulic and pneumatic system uses famous standard components. Key parts use original imported components to improve its reliability.
4. The main hydro-cylinder uses composite cylinder structure which simplifies whole machine structure.
5. It uses proportional valve to control hydraulic motion.
6. The hydraulic system has control function of mold closing force and pressure sensor, which guarantees synchronism of main machine and auxiliary equipments, and avoids crushing sand molds.
vacuum airproof molding line
1.high efficiency
2.fall sand smooth
3. low noise.
4.ISO9001:2000
Our factory developed many kinds of molding , core-marketing and reclamation complete sets of equipment and every kind of conveying equipment forfuran resin-bonded ,sand and grease-hardening water glass sand . they are exquisitely made . with main components being imported , their performance keep up with the advanced levels of the same products abroad . Acording to the users requirements , we can provide the trunkey engineering of every kind of production line complete sets of equipment , including installation and trial run .
Molding line include foundry-model transport, box-bunting, box-poking box-return orbit, pneumatic, control system, electric system. It include pressurize and open mechanization .molding line that according to foundry-model transport. the company have produce many set of molding line , it include Z124 ,Z145,Z146,Z149,ZS0806,Z1410.sand-box size of the most specs molding line has achieved 3000---1900mm.
2.fall sand smooth
3. low noise.
4.ISO9001:2000
Our factory developed many kinds of molding , core-marketing and reclamation complete sets of equipment and every kind of conveying equipment forfuran resin-bonded ,sand and grease-hardening water glass sand . they are exquisitely made . with main components being imported , their performance keep up with the advanced levels of the same products abroad . Acording to the users requirements , we can provide the trunkey engineering of every kind of production line complete sets of equipment , including installation and trial run .
Molding line include foundry-model transport, box-bunting, box-poking box-return orbit, pneumatic, control system, electric system. It include pressurize and open mechanization .molding line that according to foundry-model transport. the company have produce many set of molding line , it include Z124 ,Z145,Z146,Z149,ZS0806,Z1410.sand-box size of the most specs molding line has achieved 3000---1900mm.
vacuum airproof molding line
1 high-Effcient blast wheel
2 beatiful appearance
3 compact confi-Guration
4 low noise,good
5 cleaning effect
Vacuum airproof molding is a new type plastic techniques, and adopt signenleness dry and (no water, bound tagger), than it is hot up molding, pressurized sand-box, take out the air ,so the sand is tighten. The course is physics molding way.
Vacuum air proof molding have the excellence of high automatic ,high quality casting , high precision ,cleanse ,save energy , improve work surrounding in the recently years , it is speedy developed .
We have the world-leading vacuum airproof molding technique; we can produce vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ton-thousand vacuum airproof molding line that is the biggest in the mainland at present.
Molding line include foundry-model transport, box-bunting, box-poking box-return orbit, pneumatic, control system, electric system. It include pressurize and open mechanization .molding line that according to foundry-model transport. the company have produce many set of molding line , it include Z124 ,Z145,Z146,Z149,ZS0806,Z1410.sand-box size of the most specs molding line has achieved 3000---1900mm
2 beatiful appearance
3 compact confi-Guration
4 low noise,good
5 cleaning effect
Vacuum airproof molding is a new type plastic techniques, and adopt signenleness dry and (no water, bound tagger), than it is hot up molding, pressurized sand-box, take out the air ,so the sand is tighten. The course is physics molding way.
Vacuum air proof molding have the excellence of high automatic ,high quality casting , high precision ,cleanse ,save energy , improve work surrounding in the recently years , it is speedy developed .
We have the world-leading vacuum airproof molding technique; we can produce vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ton-thousand vacuum airproof molding line that is the biggest in the mainland at present.
Molding line include foundry-model transport, box-bunting, box-poking box-return orbit, pneumatic, control system, electric system. It include pressurize and open mechanization .molding line that according to foundry-model transport. the company have produce many set of molding line , it include Z124 ,Z145,Z146,Z149,ZS0806,Z1410.sand-box size of the most specs molding line has achieved 3000---1900mm
vacuum flask mould
1.high efficiency
2.fall sand smooth
3. low noise.
4.ISO9001:2000
Vacuum airproof molding is a new type plastic technics, and adopt singleness dry sand (no water, bond, tagger), then it is hot up, molding, pressurized sand-box, take out the air, so the sand is tighten. The course is a physics molding way.
We have the world-leading Vacuum airproof molding technic, we can produce Vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ten-thousand Vacuum airproof molding line that is the biggest line in the homeland.
Vacuum airproof molding is made up of: pattern plate, vacuum system, calefaction, molding and server, vibrating table, sand molding machine sand plant and so on.
Vacuum airproof molding have the excellence of high automatic, high quality of casting, high precision, cleanse, save energy, improve work surrounding, in the recently years, it is speedy developed.
characterstic :
1. the quantity of the surface is good
2. the cast have less vice
3. easy to stripping
4. high precision
5. the cast sand is not bonded , and the sand could be almost recycled 100%
6. reduce the cost of each cast
2.fall sand smooth
3. low noise.
4.ISO9001:2000
Vacuum airproof molding is a new type plastic technics, and adopt singleness dry sand (no water, bond, tagger), then it is hot up, molding, pressurized sand-box, take out the air, so the sand is tighten. The course is a physics molding way.
We have the world-leading Vacuum airproof molding technic, we can produce Vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ten-thousand Vacuum airproof molding line that is the biggest line in the homeland.
Vacuum airproof molding is made up of: pattern plate, vacuum system, calefaction, molding and server, vibrating table, sand molding machine sand plant and so on.
Vacuum airproof molding have the excellence of high automatic, high quality of casting, high precision, cleanse, save energy, improve work surrounding, in the recently years, it is speedy developed.
characterstic :
1. the quantity of the surface is good
2. the cast have less vice
3. easy to stripping
4. high precision
5. the cast sand is not bonded , and the sand could be almost recycled 100%
6. reduce the cost of each cast
vacuum metalizing mould
vacuum sealed molding line is widely used to cast all kinds of workpiece ,have the characteristics of high-efficiency ,saving
Vacuum airproof molding is a new type plastic technics, and adopt singleness dry sand (no water, bond, tagger), then it is hot up, molding, pressurized sand-box, take out the air, so the sand is tighten. The course is a physics molding way.
We have the world-leading Vacuum airproof molding technic, we can produce Vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ten-thousand Vacuum airproof molding line that is the biggest line in the homeland.
Vacuum airproof molding is made up of: pattern plate, vacuum system, calefaction, molding and server, vibrating table, sand molding machine sand plant and so on.
Vacuum airproof molding have the excellence of high automatic, high quality of casting, high precision, cleanse, save energy, improve work surrounding, in the recently years, it is speedy developed.
Vacuum airproof molding is a new type plastic technics, and adopt singleness dry sand (no water, bond, tagger), then it is hot up, molding, pressurized sand-box, take out the air, so the sand is tighten. The course is a physics molding way.
We have the world-leading Vacuum airproof molding technic, we can produce Vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ten-thousand Vacuum airproof molding line that is the biggest line in the homeland.
Vacuum airproof molding is made up of: pattern plate, vacuum system, calefaction, molding and server, vibrating table, sand molding machine sand plant and so on.
Vacuum airproof molding have the excellence of high automatic, high quality of casting, high precision, cleanse, save energy, improve work surrounding, in the recently years, it is speedy developed.
vacuum molding line
1 high automatic
2 high quality of casting
3 high precision
4 save energy
5 improve work surrounding
Vacuum casting production line is a special casting method invented and developed in Japan in the 20th century, it uses the single sand with a plastic film by the heating to coat molding through venthole exhaust device .Sealed sand box and mould pumping into the vacuum, they can create the internal and external pressures error and to make the dry sand compact so that it can form the needed mould.
The vacuum molding line adopts single sand as the cast sand,use the plastic film to coat molding after heating ,pluming the vacuum make the inside and external pressure error to make the sand compact that it can from the needed mould .
Vacuum molding casting’s surface is in good quality, less casting defects, easy mold release, and high precision in cast size, and the sand is without binder, thus, it is almost full recovery, which reduces material costs, and it is gradually used.
2 high quality of casting
3 high precision
4 save energy
5 improve work surrounding
Vacuum casting production line is a special casting method invented and developed in Japan in the 20th century, it uses the single sand with a plastic film by the heating to coat molding through venthole exhaust device .Sealed sand box and mould pumping into the vacuum, they can create the internal and external pressures error and to make the dry sand compact so that it can form the needed mould.
The vacuum molding line adopts single sand as the cast sand,use the plastic film to coat molding after heating ,pluming the vacuum make the inside and external pressure error to make the sand compact that it can from the needed mould .
Vacuum molding casting’s surface is in good quality, less casting defects, easy mold release, and high precision in cast size, and the sand is without binder, thus, it is almost full recovery, which reduces material costs, and it is gradually used.
vacuum molding line
High-strength spring, easy installation, smooth operation, noise.
Vacuum airproof molding is a new type plastic technics, and adopt singleness dry sand (no water, bond, tagger), then it is hot up, molding, pressurized sand-box, take out the air, so the sand is tighten. The course is a physics molding way.
We have the world-leading Vacuum airproof molding technic, we can produce Vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ten-thousand Vacuum airproof molding line that is the biggest line in the homeland.
Vacuum airproof molding is made up of: pattern plate, vacuum system, calefaction, molding and server, vibrating table, sand molding machine sand plant and so on.
Vacuum airproof molding have the excellence of high automatic, high quality of casting, high precision, cleanse, save energy, improve work surrounding, in the recently years, it is speedy developed.
characterstic :
1. the quantity of the surface is good
2. the cast have less vice
3. easy to stripping
4. high precision
5. the cast sand is not bonded , and the sand could be almost recycled 100%
6. reduce the cost of each cast
Vacuum airproof molding is a new type plastic technics, and adopt singleness dry sand (no water, bond, tagger), then it is hot up, molding, pressurized sand-box, take out the air, so the sand is tighten. The course is a physics molding way.
We have the world-leading Vacuum airproof molding technic, we can produce Vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ten-thousand Vacuum airproof molding line that is the biggest line in the homeland.
Vacuum airproof molding is made up of: pattern plate, vacuum system, calefaction, molding and server, vibrating table, sand molding machine sand plant and so on.
Vacuum airproof molding have the excellence of high automatic, high quality of casting, high precision, cleanse, save energy, improve work surrounding, in the recently years, it is speedy developed.
characterstic :
1. the quantity of the surface is good
2. the cast have less vice
3. easy to stripping
4. high precision
5. the cast sand is not bonded , and the sand could be almost recycled 100%
6. reduce the cost of each cast
vacuum molding machine
vacuum sealed molding line is widely used to cast all kinds of workpiece ,have the characteristics of high-efficiency ,saving
Vacuum airproof molding is a new type plastic technics, and adopt singleness dry sand (no water, bond, tagger), then it is hot up, molding, pressurized sand-box, take out the air, so the sand is tighten. The course is a physics molding way.
We have the world-leading Vacuum airproof molding technic, we can produce Vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ten-thousand Vacuum airproof molding line that is the biggest line in the homeland.
Vacuum airproof molding is made up of: pattern plate, vacuum system, calefaction, molding and server, vibrating table, sand molding machine sand plant and so on.
Vacuum airproof molding have the excellence of high automatic, high quality of casting, high precision, cleanse, save energy, improve work surrounding, in the recently years, it is speedy developed.
characterstic :
1. the quantity of the surface is good
2. the cast have less vice
3. easy to stripping
4. high precision
5. the cast sand is not bonded , and the sand could be almost recycled 100%
6. reduce the cost of each cast
7.we can make 3000t/yyear ------80000t/year
Vacuum airproof molding is a new type plastic technics, and adopt singleness dry sand (no water, bond, tagger), then it is hot up, molding, pressurized sand-box, take out the air, so the sand is tighten. The course is a physics molding way.
We have the world-leading Vacuum airproof molding technic, we can produce Vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ten-thousand Vacuum airproof molding line that is the biggest line in the homeland.
Vacuum airproof molding is made up of: pattern plate, vacuum system, calefaction, molding and server, vibrating table, sand molding machine sand plant and so on.
Vacuum airproof molding have the excellence of high automatic, high quality of casting, high precision, cleanse, save energy, improve work surrounding, in the recently years, it is speedy developed.
characterstic :
1. the quantity of the surface is good
2. the cast have less vice
3. easy to stripping
4. high precision
5. the cast sand is not bonded , and the sand could be almost recycled 100%
6. reduce the cost of each cast
7.we can make 3000t/yyear ------80000t/year
vacuum molding machine
1. the quantity of the surface is good
2. the cast have less vice
3. easy to stripping
4. high precision
Vacuum airproof molding is a new type plastic technics, and adopt singleness dry sand (no water, bond, tagger), then it is hot up, molding, pressurized sand-box, take out the air, so the sand is tighten. The course is a physics molding way.
We have the world-leading Vacuum airproof molding technic, we can produce Vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ten-thousand Vacuum airproof molding line that is the biggest line in the homeland.
Vacuum airproof molding is made up of: pattern plate, vacuum system, calefaction, molding and server, vibrating table, sand molding machine sand plant and so on.
Vacuum airproof molding have the excellence of high automatic, high quality of casting, high precision, cleanse, save energy, improve work surrounding, in the recently years, it is speedy developed.
2. the cast have less vice
3. easy to stripping
4. high precision
Vacuum airproof molding is a new type plastic technics, and adopt singleness dry sand (no water, bond, tagger), then it is hot up, molding, pressurized sand-box, take out the air, so the sand is tighten. The course is a physics molding way.
We have the world-leading Vacuum airproof molding technic, we can produce Vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ten-thousand Vacuum airproof molding line that is the biggest line in the homeland.
Vacuum airproof molding is made up of: pattern plate, vacuum system, calefaction, molding and server, vibrating table, sand molding machine sand plant and so on.
Vacuum airproof molding have the excellence of high automatic, high quality of casting, high precision, cleanse, save energy, improve work surrounding, in the recently years, it is speedy developed.
Automatic Casting Ball Production Line
1.The automatic cast ball prodution line is highly automatic and high-tech.
2.The automatic cast ball production line is researched and developed by ourselves.during all the operating process,it adopted the computer to control,which is more standard and high-efficiency.
3.Using this equipment is not only improve the quality of products,but also reduce the producing costs.
2.The automatic cast ball production line is researched and developed by ourselves.during all the operating process,it adopted the computer to control,which is more standard and high-efficiency.
3.Using this equipment is not only improve the quality of products,but also reduce the producing costs.
vacuum moulding
Characteristics: High-strength spring, easy installation, smooth operation, noise.
Vacuum airproof molding is a new type plastic technics, and adopt singleness dry sand (no water, bond, tagger), then it is hot up, molding, pressurized sand-box, take out the air, so the sand is tighten. The course is a physics molding way.
We have the world-leading Vacuum airproof molding technic, we can produce Vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ten-thousand Vacuum airproof molding line that is the biggest line in the homeland.
Vacuum airproof molding is made up of: pattern plate, vacuum system, calefaction, molding and server, vibrating table, sand molding machine sand plant and so on.
Vacuum airproof molding have the excellence of high automatic, high quality of casting, high precision, cleanse, save energy, improve work surrounding, in the recently years, it is speedy developed.
characterstic :
1. the quantity of the surface is good
2. the cast have less vice
3. easy to stripping
4. high precision
5. the cast sand is not bonded , and the sand could be almost recycled 100%
6. reduce the cost of each cast
Vacuum airproof molding is a new type plastic technics, and adopt singleness dry sand (no water, bond, tagger), then it is hot up, molding, pressurized sand-box, take out the air, so the sand is tighten. The course is a physics molding way.
We have the world-leading Vacuum airproof molding technic, we can produce Vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ten-thousand Vacuum airproof molding line that is the biggest line in the homeland.
Vacuum airproof molding is made up of: pattern plate, vacuum system, calefaction, molding and server, vibrating table, sand molding machine sand plant and so on.
Vacuum airproof molding have the excellence of high automatic, high quality of casting, high precision, cleanse, save energy, improve work surrounding, in the recently years, it is speedy developed.
characterstic :
1. the quantity of the surface is good
2. the cast have less vice
3. easy to stripping
4. high precision
5. the cast sand is not bonded , and the sand could be almost recycled 100%
6. reduce the cost of each cast
vacuum negative-pressure system
Negative pressure casting unit should request, and combining the domestic and foreign relevant technology and the practical expe
Negative pressure casting unit should request, and combining the domestic and foreign relevant technology and the practical experience for many years, the requirements and characteristics of the development of research into new generation vacuum suction device is epc technology, it has the necessary equipment and gas pressure filter, smoke and gas distribution, and gas separation of miscellaneous road etc. Function. Main function is to cast fire in dry sand compaction, and will disappear solid mould cavity, timely product vaporization to get out of the sound is dry sand castings, negative real casting process is one of the core equipment of host.
Negative pressure casting unit should request, and combining the domestic and foreign relevant technology and the practical experience for many years, the requirements and characteristics of the development of research into new generation vacuum suction device is epc technology, it has the necessary equipment and gas pressure filter, smoke and gas distribution, and gas separation of miscellaneous road etc. Function. Main function is to cast fire in dry sand compaction, and will disappear solid mould cavity, timely product vaporization to get out of the sound is dry sand castings, negative real casting process is one of the core equipment of host.
vacuum negative-pressure system
Negative pressure casting unit should request, and combining the domestic and foreign relevant technology and the practical expe
Negative pressure casting unit should request, and combining the domestic and foreign relevant technology and the practical experience for many years, the requirements and characteristics of the development of research into new generation vacuum suction device is epc technology, it has the necessary equipment and gas pressure filter, smoke and gas distribution, and gas separation of miscellaneous road etc. Function. Main function is to cast fire in dry sand compaction, and will disappear solid mould cavity, timely product vaporization to get out of the sound is dry sand castings, negative real casting process is one of the core equipment of host.
Negative pressure casting unit should request, and combining the domestic and foreign relevant technology and the practical experience for many years, the requirements and characteristics of the development of research into new generation vacuum suction device is epc technology, it has the necessary equipment and gas pressure filter, smoke and gas distribution, and gas separation of miscellaneous road etc. Function. Main function is to cast fire in dry sand compaction, and will disappear solid mould cavity, timely product vaporization to get out of the sound is dry sand castings, negative real casting process is one of the core equipment of host.
vacuum sealed molding line
1 high automatic
2 high quality of casting
3 high precision
4 save energy
Vacuum airproof molding is a new type plastic technics, and adopt singleness dry sand (no water, bond, tagger), then it is hot up, molding, pressurized sand-box, take out the air, so the sand is tighten. The course is a physics molding way.
We have the world-leaning Vacuum airproof molding technic, we can produce Vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ten-thousand Vacuum airproof molding line that is the biggest line in the homeland.
Vacuum airproof molding is made up of: pattern plate, vacuum system, calefaction, molding and server, vibrating table, sandmolding machine and so on.
Vacuum airproof molding have the excellence of high automatic, high quality of casting, high precision, cleanse, save energy, improve work surrounding, in the recently years, it is speedy developed.
2 high quality of casting
3 high precision
4 save energy
Vacuum airproof molding is a new type plastic technics, and adopt singleness dry sand (no water, bond, tagger), then it is hot up, molding, pressurized sand-box, take out the air, so the sand is tighten. The course is a physics molding way.
We have the world-leaning Vacuum airproof molding technic, we can produce Vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ten-thousand Vacuum airproof molding line that is the biggest line in the homeland.
Vacuum airproof molding is made up of: pattern plate, vacuum system, calefaction, molding and server, vibrating table, sandmolding machine and so on.
Vacuum airproof molding have the excellence of high automatic, high quality of casting, high precision, cleanse, save energy, improve work surrounding, in the recently years, it is speedy developed.
vacuum sealed molding line
1 high automatic
2 high quality of casting
3 high precision
4 save energy
Vacuum airproof molding is a new type plastic technics, and adopt singleness dry sand (no water, bond, tagger), then it is hot up, molding, pressurized sand-box, take out the air, so the sand is tighten. The course is a physics molding way.
We have the world-leaning Vacuum airproof molding technic, we can produce Vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ten-thousand Vacuum airproof molding line that is the biggest line in the homeland.
Vacuum airproof molding is made up of: pattern plate, vacuum system, calefaction, molding and server, vibrating table, sandmolding machine and so on.
Vacuum airproof molding have the excellence of high automatic, high quality of casting, high precision, cleanse, save energy, improve work surrounding, in the recently years, it is speedy developed.
2 high quality of casting
3 high precision
4 save energy
Vacuum airproof molding is a new type plastic technics, and adopt singleness dry sand (no water, bond, tagger), then it is hot up, molding, pressurized sand-box, take out the air, so the sand is tighten. The course is a physics molding way.
We have the world-leaning Vacuum airproof molding technic, we can produce Vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ten-thousand Vacuum airproof molding line that is the biggest line in the homeland.
Vacuum airproof molding is made up of: pattern plate, vacuum system, calefaction, molding and server, vibrating table, sandmolding machine and so on.
Vacuum airproof molding have the excellence of high automatic, high quality of casting, high precision, cleanse, save energy, improve work surrounding, in the recently years, it is speedy developed.
vacuum sealed molding line
high automatic,high quality of casting,high precision,cleanse, save energy,
Vacuum airproof molding is a new type plastic technics, and adopt singleness dry sand (no water, bond, tagger), then it is hot up, molding, pressurized sand-box, take out the air, so the sand is tighten. The course is a physics molding way.
We have the world-leaning Vacuum airproof molding technic, we can produce Vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ten-thousand Vacuum airproof molding line that is the biggest line in the homeland.
Vacuum airproof molding is made up of: pattern plate, vacuum system, calefaction, molding and server, vibrating table, sandmolding machine and so on.
Vacuum airproof molding have the excellence of high automatic, high quality of casting, high precision, cleanse, save energy, improve work surrounding, in the recently years, it is speedy developed.
Vacuum airproof molding is a new type plastic technics, and adopt singleness dry sand (no water, bond, tagger), then it is hot up, molding, pressurized sand-box, take out the air, so the sand is tighten. The course is a physics molding way.
We have the world-leaning Vacuum airproof molding technic, we can produce Vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ten-thousand Vacuum airproof molding line that is the biggest line in the homeland.
Vacuum airproof molding is made up of: pattern plate, vacuum system, calefaction, molding and server, vibrating table, sandmolding machine and so on.
Vacuum airproof molding have the excellence of high automatic, high quality of casting, high precision, cleanse, save energy, improve work surrounding, in the recently years, it is speedy developed.
vacuum sealed molding line
1.high efficiency
2.fall sand smooth
3. low noise.
4.ISO9001:2000
Vacuum airproof molding is a new type plastic technics, and adopt singleness dry sand (no water, bond, tagger), then it is hot up, molding, pressurized sand-box, take out the air, so the sand is tighten. The course is a physics molding way.
We have the world-leaning Vacuum airproof molding technic, we can produce Vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ten-thousand Vacuum airproof molding line that is the biggest line in the homeland.
Vacuum airproof molding is made up of: pattern plate, vacuum system, calefaction, molding and server, vibrating table, sandmolding machine and so on.
Vacuum airproof molding have the excellence of high automatic, high quality of casting, high precision, cleanse, save energy, improve work surrounding, in the recently years, it is speedy developed.
2.fall sand smooth
3. low noise.
4.ISO9001:2000
Vacuum airproof molding is a new type plastic technics, and adopt singleness dry sand (no water, bond, tagger), then it is hot up, molding, pressurized sand-box, take out the air, so the sand is tighten. The course is a physics molding way.
We have the world-leaning Vacuum airproof molding technic, we can produce Vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ten-thousand Vacuum airproof molding line that is the biggest line in the homeland.
Vacuum airproof molding is made up of: pattern plate, vacuum system, calefaction, molding and server, vibrating table, sandmolding machine and so on.
Vacuum airproof molding have the excellence of high automatic, high quality of casting, high precision, cleanse, save energy, improve work surrounding, in the recently years, it is speedy developed.
vacuum sealed moulding line
vacuum sealed molding line :the sand is tighten ,high automatic,high quality of casting,high precision,cleanse, save energy
Vacuum airproof molding is a new type plastic technics, and adopt singleness dry sand (no water, bond, tagger), then it is hot up, molding, pressurized sand-box, take out the air, so the sand is tighten. The course is a physics molding way.
We have the world-leaning Vacuum airproof molding technic, we can produce Vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ten-thousand Vacuum airproof molding line that is the biggest line in the homeland.
Vacuum airproof molding is made up of: pattern plate, vacuum system, calefaction, molding and server, vibrating table, sandmolding machine and so on.
Vacuum airproof molding have the excellence of high automatic, high quality of casting, high precision, cleanse, save energy, improve work surrounding, in the recently years, it is speedy developed.
Vacuum airproof molding is a new type plastic technics, and adopt singleness dry sand (no water, bond, tagger), then it is hot up, molding, pressurized sand-box, take out the air, so the sand is tighten. The course is a physics molding way.
We have the world-leaning Vacuum airproof molding technic, we can produce Vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ten-thousand Vacuum airproof molding line that is the biggest line in the homeland.
Vacuum airproof molding is made up of: pattern plate, vacuum system, calefaction, molding and server, vibrating table, sandmolding machine and so on.
Vacuum airproof molding have the excellence of high automatic, high quality of casting, high precision, cleanse, save energy, improve work surrounding, in the recently years, it is speedy developed.
vacuum sealed moulding line
high quality of casting, high precision, cleanse, save energy, improve work surrounding,it is speedy developed
Vacuum airproof molding is a new type plastic technics, and adopt singleness dry sand (no water, bond, tagger), then it is hot up, molding, pressurized sand-box, take out the air, so the sand is tighten. The course is a physics molding way.
We have the world-leaning Vacuum airproof molding technic, we can produce Vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ten-thousand Vacuum airproof molding line that is the biggest line in the homeland.
Vacuum airproof molding is made up of: pattern plate, vacuum system, calefaction, molding and server, vibrating table, sandmolding machine and so on.
Vacuum airproof molding have the excellence of high automatic, high quality of casting, high precision, cleanse, save energy, improve work surrounding, in the recently years, it is speedy developed.
Vacuum airproof molding is a new type plastic technics, and adopt singleness dry sand (no water, bond, tagger), then it is hot up, molding, pressurized sand-box, take out the air, so the sand is tighten. The course is a physics molding way.
We have the world-leaning Vacuum airproof molding technic, we can produce Vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ten-thousand Vacuum airproof molding line that is the biggest line in the homeland.
Vacuum airproof molding is made up of: pattern plate, vacuum system, calefaction, molding and server, vibrating table, sandmolding machine and so on.
Vacuum airproof molding have the excellence of high automatic, high quality of casting, high precision, cleanse, save energy, improve work surrounding, in the recently years, it is speedy developed.
vacuum sealed moulding line
1 high automatic
2 high quality of casting
3 high precision
4 save energy
Vacuum airproof molding is a new type plastic technics, and adopt singleness dry sand (no water, bond, tagger), then it is hot up, molding, pressurized sand-box, take out the air, so the sand is tighten. The course is a physics molding way.
We have the world-leaning Vacuum airproof molding technic, we can produce Vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ten-thousand Vacuum airproof molding line that is the biggest line in the homeland.
Vacuum airproof molding is made up of: pattern plate, vacuum system, calefaction, molding and server, vibrating table, sandmolding machine and so on.
Vacuum airproof molding have the excellence of high automatic, high quality of casting, high precision, cleanse, save energy, improve work surrounding, in the recently years, it is speedy developed.
2 high quality of casting
3 high precision
4 save energy
Vacuum airproof molding is a new type plastic technics, and adopt singleness dry sand (no water, bond, tagger), then it is hot up, molding, pressurized sand-box, take out the air, so the sand is tighten. The course is a physics molding way.
We have the world-leaning Vacuum airproof molding technic, we can produce Vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ten-thousand Vacuum airproof molding line that is the biggest line in the homeland.
Vacuum airproof molding is made up of: pattern plate, vacuum system, calefaction, molding and server, vibrating table, sandmolding machine and so on.
Vacuum airproof molding have the excellence of high automatic, high quality of casting, high precision, cleanse, save energy, improve work surrounding, in the recently years, it is speedy developed.
Automatic Centrifugal Casting Machine(For Platinum)
Yihui Brand Centrifulgal Jewellry Casting Machine designed for platinum casting
1. With PID temp automatci-control system, max temp 18000 degree, temp difference 2 dgree.
2. Unique and strong electromagnetic stirring function helps making even purity of smelted metals.
3. Automatic PC control&induction heating with improved intelligence. semi automatic control chinese and english version switch automatically.
4. 50 memory programs make it is easy to examine various parameter or data at any time and immediate reversion.
5. Various casting mode is for your option to make better and correct casting quality
6. Integrated with casting and smelting funtion to one unit, easy operation and save time.
7. The entire casting process can be seen clealy, so you can adjust realted parameter at any time to guarantee man and machine safe with pressure-loci system, safe-controlled valve.
8. Casting flask can be pushed up and down automaticlly through this machine to ensure you job easier and more convenient.
9. It designed for casting platinum.
10. Compact design which requres samll sapce for itself.
1. With PID temp automatci-control system, max temp 18000 degree, temp difference 2 dgree.
2. Unique and strong electromagnetic stirring function helps making even purity of smelted metals.
3. Automatic PC control&induction heating with improved intelligence. semi automatic control chinese and english version switch automatically.
4. 50 memory programs make it is easy to examine various parameter or data at any time and immediate reversion.
5. Various casting mode is for your option to make better and correct casting quality
6. Integrated with casting and smelting funtion to one unit, easy operation and save time.
7. The entire casting process can be seen clealy, so you can adjust realted parameter at any time to guarantee man and machine safe with pressure-loci system, safe-controlled valve.
8. Casting flask can be pushed up and down automaticlly through this machine to ensure you job easier and more convenient.
9. It designed for casting platinum.
10. Compact design which requres samll sapce for itself.
vacuum sealed moulding line
1 high automatic
2 high quality of casting
3 high precision
4 save energy
Vacuum airproof molding is a new type plastic technics, and adopt singleness dry sand (no water, bond, tagger), then it is hot up, molding, pressurized sand-box, take out the air, so the sand is tighten. The course is a physics molding way.
We have the world-leaning Vacuum airproof molding technic, we can produce Vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ten-thousand Vacuum airproof molding line that is the biggest line in the homeland.
Vacuum airproof molding is made up of: pattern plate, vacuum system, calefaction, molding and server, vibrating table, sandmolding machine and so on.
Vacuum airproof molding have the excellence of high automatic, high quality of casting, high precision, cleanse, save energy, improve work surrounding, in the recently years, it is speedy developed.
2 high quality of casting
3 high precision
4 save energy
Vacuum airproof molding is a new type plastic technics, and adopt singleness dry sand (no water, bond, tagger), then it is hot up, molding, pressurized sand-box, take out the air, so the sand is tighten. The course is a physics molding way.
We have the world-leaning Vacuum airproof molding technic, we can produce Vacuum airproof molding and sand molding machine by the basis of user request. The company has the 10 ten-thousand Vacuum airproof molding line that is the biggest line in the homeland.
Vacuum airproof molding is made up of: pattern plate, vacuum system, calefaction, molding and server, vibrating table, sandmolding machine and so on.
Vacuum airproof molding have the excellence of high automatic, high quality of casting, high precision, cleanse, save energy, improve work surrounding, in the recently years, it is speedy developed.
Wednesday, December 29, 2010
vacuum sealed moulding line
high automatic,high quality of casting,high precision,cleanse, save energy,
This model is suitable for cleaning or reinforcing various medium and large batch forged piece, casting and sheet metal parts but also more suitable for frosting surface after rust removal and increasing adhesive force of spraying. There are models of Q375 single-hook shot blasting machine, Q376 double-hook shot blasting machine and Q378 double-hook shot blasting machine etc.Characteristics:
1 This machine adopts no-pit structure which is easy to be mounted and thus reduce investment cost.
2 Compact structures, high efficiency, good cleaning quality, reliable and safe operation, steady running.
3 The cleaning chamber is wear-resisting and impact resistant with good intensity by adopting High Chromium Manganese plate.
4 Double-hook structures, which can work independently, neither influencing the other, thus improve production efficiency. The hook adopts planet principle with simultaneous rotation and revolution. The processed work piece doesnt have male and female face.
5 Two-stage dust removal (cyclone dust removal and bag filter), great air volume, the dust is completely filtered, and the air discharge is in compliance with environment protection standard.
6 Precise assembly, high-quality bearing, and low noise of motor running.
This model is suitable for cleaning or reinforcing various medium and large batch forged piece, casting and sheet metal parts but also more suitable for frosting surface after rust removal and increasing adhesive force of spraying. There are models of Q375 single-hook shot blasting machine, Q376 double-hook shot blasting machine and Q378 double-hook shot blasting machine etc.Characteristics:
1 This machine adopts no-pit structure which is easy to be mounted and thus reduce investment cost.
2 Compact structures, high efficiency, good cleaning quality, reliable and safe operation, steady running.
3 The cleaning chamber is wear-resisting and impact resistant with good intensity by adopting High Chromium Manganese plate.
4 Double-hook structures, which can work independently, neither influencing the other, thus improve production efficiency. The hook adopts planet principle with simultaneous rotation and revolution. The processed work piece doesnt have male and female face.
5 Two-stage dust removal (cyclone dust removal and bag filter), great air volume, the dust is completely filtered, and the air discharge is in compliance with environment protection standard.
6 Precise assembly, high-quality bearing, and low noise of motor running.
Subscribe to:
Posts (Atom)