This product is essential equipment in casting processing.
Three-dimentional plain jolter is one of the most important equipments in EPC.
After years of development and research, we have exploited three main series including dozens of kinds. The main series can be divided into two-dimensional vibrating auto-control type, three-dimensional vibrating auto-control type and three-dimensional FM vibrating type (used in production run equipment). It is mainly used in jolt moldings, which can improve traditional casting techniques and make incompact sand mixture compact to fix up foam mould through three-dimensional vibration.
This equipment is mainly used in jolt pack of sand mixture in EPC molding. It adopts rubber spring and six or eight vibrating motors with effects of up-down, left-right and front-behind. What’s more, it has multi-structural support and possesses advantages of well set, good leak tightness, dependable performance, easy operation, adjustable vibration frequency, low noise, high production efficiency, and things like that.
Monday, January 31, 2011
plant regeneration of resin sand making machine
1 high automatic
2 high quality of casting
3 high precision
4 save energy
Our factory developed many kinds of molding , core-marketing and reclamation complete sets of equipment and every kind of conveying equipment forfuran resin-bonded ,sand and grease-hardening water glass sand . they are exquisitely made . with main components being imported , their performance keep up with the advanced levels of the same products abroad . Acording to the users requirements , we can provide the trunkey engineering of every kind of production line complete sets of equipment , including installation and trial run .
Characterstic :
1. the quantity of the surface is good
2. the cast have less vice
3. easy to stripping
4. high precision
5. the cast sand is not bonded , and the sand could be almost recycled 100%
6. reduce the cost of each cast
2 high quality of casting
3 high precision
4 save energy
Our factory developed many kinds of molding , core-marketing and reclamation complete sets of equipment and every kind of conveying equipment forfuran resin-bonded ,sand and grease-hardening water glass sand . they are exquisitely made . with main components being imported , their performance keep up with the advanced levels of the same products abroad . Acording to the users requirements , we can provide the trunkey engineering of every kind of production line complete sets of equipment , including installation and trial run .
Characterstic :
1. the quantity of the surface is good
2. the cast have less vice
3. easy to stripping
4. high precision
5. the cast sand is not bonded , and the sand could be almost recycled 100%
6. reduce the cost of each cast
plasma cutting machine
plasma cutting machine
1.X,Y sroke:2000mmx4000mm
2.two years gurantee
3.stable system
The bed lathe is made of cast steel, analyzed and designed with FEA, so the working table is more stable and all the parts are relieving of stress before the bed process.
Effective Horizontal Span ( X Axis ): 2000mm
Y Axis Size: 4000mm
Height Z Axis: 200mm
Repositioning Positioning Accuracy: ( X, Y, Z ) ±0.05mm
Processing Accuracy: ±0.4mm
Transmission System: XY Rack & Linear Guideway
Z Ball Screw & Linear Guideway
Max. Cutting Speed 10000 mm/min
Working Voltage: 380V 50HZ
Plasma Unit Max.: Power Output 30KW
Command Language: G-Code
Driven System: 3 Phase Stepper ( Optional: AC Servo )
Software: FASTCAM or MTC
Standard Domestic Arc Voltage XPTHC and Anti-corrosion System of Cutting Torch
Plasma Unit: Standard Hypertherm Hyspeed HT2000LHF ( 200A )
Maximum Cutting Capacity: 38mm (Recommended cutting capacity: 25mm )
Severance Cutting Capacity ( Edge start): 50mm
Operational Air Pressure: 0.85Mpa
Operational Air Supply: 40L/min
Protective Air pressure: 0.65mpa
Protective Air Supply: 130L/min
Operational Environment: Temperature:-10°C~40°C Humidity: 30%~75%
1.X,Y sroke:2000mmx4000mm
2.two years gurantee
3.stable system
The bed lathe is made of cast steel, analyzed and designed with FEA, so the working table is more stable and all the parts are relieving of stress before the bed process.
Effective Horizontal Span ( X Axis ): 2000mm
Y Axis Size: 4000mm
Height Z Axis: 200mm
Repositioning Positioning Accuracy: ( X, Y, Z ) ±0.05mm
Processing Accuracy: ±0.4mm
Transmission System: XY Rack & Linear Guideway
Z Ball Screw & Linear Guideway
Max. Cutting Speed 10000 mm/min
Working Voltage: 380V 50HZ
Plasma Unit Max.: Power Output 30KW
Command Language: G-Code
Driven System: 3 Phase Stepper ( Optional: AC Servo )
Software: FASTCAM or MTC
Standard Domestic Arc Voltage XPTHC and Anti-corrosion System of Cutting Torch
Plasma Unit: Standard Hypertherm Hyspeed HT2000LHF ( 200A )
Maximum Cutting Capacity: 38mm (Recommended cutting capacity: 25mm )
Severance Cutting Capacity ( Edge start): 50mm
Operational Air Pressure: 0.85Mpa
Operational Air Supply: 40L/min
Protective Air pressure: 0.65mpa
Protective Air Supply: 130L/min
Operational Environment: Temperature:-10°C~40°C Humidity: 30%~75%
plasma cutting machine
plasma cutting machine
1.X,Y sroke:2000mmx4000mm
2.two years gurantee
3.stable system
The bed lathe is made of cast steel, analyzed and designed with FEA, so the working table is more stable and all the parts are relieving of stress before the bed process.
Effective Horizontal Span ( X Axis ): 2000mm
Y Axis Size: 4000mm
Height Z Axis: 200mm
Repositioning Positioning Accuracy: ( X, Y, Z ) ±0.05mm
Processing Accuracy: ±0.4mm
Transmission System: XY Rack & Linear Guideway
Z Ball Screw & Linear Guideway
Max. Cutting Speed 10000 mm/min
Working Voltage: 380V 50HZ
Plasma Unit Max.: Power Output 30KW
Command Language: G-Code
Driven System: 3 Phase Stepper ( Optional: AC Servo )
Software: FASTCAM or MTC
Standard Domestic Arc Voltage XPTHC and Anti-corrosion System of Cutting Torch
Plasma Unit: Standard Hypertherm Hyspeed HT2000LHF ( 200A )
Maximum Cutting Capacity: 38mm (Recommended cutting capacity: 25mm )
Severance Cutting Capacity ( Edge start): 50mm
Operational Air Pressure: 0.85Mpa
Operational Air Supply: 40L/min
Protective Air pressure: 0.65mpa
Protective Air Supply: 130L/min
Operational Environment: Temperature:-10°C~40°C Humidity: 30%~75%
1.X,Y sroke:2000mmx4000mm
2.two years gurantee
3.stable system
The bed lathe is made of cast steel, analyzed and designed with FEA, so the working table is more stable and all the parts are relieving of stress before the bed process.
Effective Horizontal Span ( X Axis ): 2000mm
Y Axis Size: 4000mm
Height Z Axis: 200mm
Repositioning Positioning Accuracy: ( X, Y, Z ) ±0.05mm
Processing Accuracy: ±0.4mm
Transmission System: XY Rack & Linear Guideway
Z Ball Screw & Linear Guideway
Max. Cutting Speed 10000 mm/min
Working Voltage: 380V 50HZ
Plasma Unit Max.: Power Output 30KW
Command Language: G-Code
Driven System: 3 Phase Stepper ( Optional: AC Servo )
Software: FASTCAM or MTC
Standard Domestic Arc Voltage XPTHC and Anti-corrosion System of Cutting Torch
Plasma Unit: Standard Hypertherm Hyspeed HT2000LHF ( 200A )
Maximum Cutting Capacity: 38mm (Recommended cutting capacity: 25mm )
Severance Cutting Capacity ( Edge start): 50mm
Operational Air Pressure: 0.85Mpa
Operational Air Supply: 40L/min
Protective Air pressure: 0.65mpa
Protective Air Supply: 130L/min
Operational Environment: Temperature:-10°C~40°C Humidity: 30%~75%
plate billet mould
Making steel plate billet.
Specializing in production and manufacture of slab moulds assembly in all sizes.
Specializing in production and manufacture of slab moulds assembly in all sizes.
Making steel plate billet.
Specializing in production and manufacture of slab moulds assembly in all sizes.
Specializing in production and manufacture of slab moulds assembly in all sizes.
Making steel plate billet.
plate heat exchanger for industry
plate heat exchanger for industry
1.Type:BL120
2.Usage:Industry
3.Plate Material:304(0Cr18Ni9)(as requested)
4.QS9001
plate heat exchanger for industry
Single change plate heat area
0.07-1.6square
Single machine processing flow
50m³/h
Single machine assembly area
40square
Processed chemical media types
Dilute acids
Plate material
316L
Monel alloy
Ahab's - 276°C
1. Material
Plate Material
: 304(0Cr18Ni9),321(0Cr18Ni10Ti),316(0Cr17Ni12Mo2),316L(00Cr17Ni14Mo2),titanium(TA1-A),254SMO,nickel alloy
Gasket Material
: NBR rubber, EPDM RUBBER, Fluorous rubber, Neoprene rubber, silicone rubber, asbestos rubber sheet.
Rack material
: carbon steel, stainless steel, outsourcing stainless steel
Rod material
: Galvanized steel, stainless steel
Interface Material
: rubber, carbon steel, stainless
steel
Features and Applications for different material
:
Code and material
NBR rubber
EPDM rubber
Fluorous rubber
Neoprene rubber
Silicone rubber
Asbestos fiber sheet
N
E
F
C
Q
A
Applicable temperature (°C)
-20~110
-50~150
0~180
-40~100
-65~230
20~250
Tensile strength at break (MPa)
≥10
--
Elongation at break(%)
≥120
--
hardness(shore A)(degree)
75±3
80±5
80±5
75±5
60±2
--
Compression set(%)
≤15
--
Name
thickness
code
Applying range
Stainless steel
0.7~1.0
0Cr18Ni9
A working environment with serious erosion of acid or basic medium
00Cr19Ni10
0Cr17Ni12Mo2
00Cr17Ni14Mo2
Commercial pure titanium
0.6~1.0
Tal
Alkali or salt making, cryogenic freezing of sea water, and where
medium with chlorine ion erode seriously
Ultralow carbon stainless steel
0.6~1.0
00Cr18Ni14Mo2Cu2
Place has organic solvent, chlorine ion and intercrystalline corrosion
2.
Design and Selection
The plate heat exchanger produced by our company strictly follows the rule listed in GB16409-1996 "plate heat exchanger," to design, manufacture and test.Especially,it comply with international standard.
3.
Application
:
Plate heat exchanger is high-efficient and compact heat transfer equipment, applied to the technologies such as cooling, heating, evaporation, condensation, disinfection and waste heat recovery. It is widely used in petrochemical, thermal power, metallurgy, textile, food, pharmaceutical, HVAC heating, nuclear industry, shipbuilding, marine development and other fields.
4.
We are specialized in designing and manufacturing,there are 5 projects in the company at present,which divided in domestic and internaitonal market.Therefore,I firmly believe that the product have a bright prospect in the global market
.
1.Type:BL120
2.Usage:Industry
3.Plate Material:304(0Cr18Ni9)(as requested)
4.QS9001
plate heat exchanger for industry
Single change plate heat area
0.07-1.6square
Single machine processing flow
50m³/h
Single machine assembly area
40square
Processed chemical media types
Dilute acids
Plate material
316L
Monel alloy
Ahab's - 276°C
1. Material
Plate Material
: 304(0Cr18Ni9),321(0Cr18Ni10Ti),316(0Cr17Ni12Mo2),316L(00Cr17Ni14Mo2),titanium(TA1-A),254SMO,nickel alloy
Gasket Material
: NBR rubber, EPDM RUBBER, Fluorous rubber, Neoprene rubber, silicone rubber, asbestos rubber sheet.
Rack material
: carbon steel, stainless steel, outsourcing stainless steel
Rod material
: Galvanized steel, stainless steel
Interface Material
: rubber, carbon steel, stainless
steel
Features and Applications for different material
:
Code and material
NBR rubber
EPDM rubber
Fluorous rubber
Neoprene rubber
Silicone rubber
Asbestos fiber sheet
N
E
F
C
Q
A
Applicable temperature (°C)
-20~110
-50~150
0~180
-40~100
-65~230
20~250
Tensile strength at break (MPa)
≥10
--
Elongation at break(%)
≥120
--
hardness(shore A)(degree)
75±3
80±5
80±5
75±5
60±2
--
Compression set(%)
≤15
--
Name
thickness
code
Applying range
Stainless steel
0.7~1.0
0Cr18Ni9
A working environment with serious erosion of acid or basic medium
00Cr19Ni10
0Cr17Ni12Mo2
00Cr17Ni14Mo2
Commercial pure titanium
0.6~1.0
Tal
Alkali or salt making, cryogenic freezing of sea water, and where
medium with chlorine ion erode seriously
Ultralow carbon stainless steel
0.6~1.0
00Cr18Ni14Mo2Cu2
Place has organic solvent, chlorine ion and intercrystalline corrosion
2.
Design and Selection
The plate heat exchanger produced by our company strictly follows the rule listed in GB16409-1996 "plate heat exchanger," to design, manufacture and test.Especially,it comply with international standard.
3.
Application
:
Plate heat exchanger is high-efficient and compact heat transfer equipment, applied to the technologies such as cooling, heating, evaporation, condensation, disinfection and waste heat recovery. It is widely used in petrochemical, thermal power, metallurgy, textile, food, pharmaceutical, HVAC heating, nuclear industry, shipbuilding, marine development and other fields.
4.
We are specialized in designing and manufacturing,there are 5 projects in the company at present,which divided in domestic and internaitonal market.Therefore,I firmly believe that the product have a bright prospect in the global market
.
Anping ShengHua NWJ series heavy weaving mesh machine
the high output
the shortest deliver time
the best quality for your evaluation
pretty competitive price
NWJ series weaving mesh machine
1, Characteristics and usage
The NWJ heavy metal mesh weaving mesh machine is to meet the marker demand, and it has filled the blank of the domestic market. It uses the machine volume net, mastle shuttle, treads the plate to hang the synthesis, the doubles latitude structure, has strong working ability, structure, has the strong, bearing capacity, big silk number density scope width etc. We can weave the wire diameter of 0.1-1.6mm more than 2 meshes, all kinds of metal wire mesh.
2, Main technical parameter
A, the breadth of weaving: 1600mm (1650mm)--3200mm (3250mm) 4000mm--6000mm
B, aperture: tread the plate to hang the synthesis structure
C, crank rotational speed: 28-30circle/minute
D, electric machinery power: 7.5KW, 1440 circles/minute
E, the weight of machines: 11 tons
F, external size: length: 3500mm width: 4500mm height: 2500mm
the shortest deliver time
the best quality for your evaluation
pretty competitive price
NWJ series weaving mesh machine
1, Characteristics and usage
The NWJ heavy metal mesh weaving mesh machine is to meet the marker demand, and it has filled the blank of the domestic market. It uses the machine volume net, mastle shuttle, treads the plate to hang the synthesis, the doubles latitude structure, has strong working ability, structure, has the strong, bearing capacity, big silk number density scope width etc. We can weave the wire diameter of 0.1-1.6mm more than 2 meshes, all kinds of metal wire mesh.
2, Main technical parameter
A, the breadth of weaving: 1600mm (1650mm)--3200mm (3250mm) 4000mm--6000mm
B, aperture: tread the plate to hang the synthesis structure
C, crank rotational speed: 28-30circle/minute
D, electric machinery power: 7.5KW, 1440 circles/minute
E, the weight of machines: 11 tons
F, external size: length: 3500mm width: 4500mm height: 2500mm
plate heat exchanger
Plate Heat Exchanger
1.Type:BL120
2.Usage:Industry
3.Plate Material:304(0Cr18Ni9)(as requested)
4.Certificate:QS and FDA
Single change plate heat area
0.07-1.6square
Single machine processing flow
50m³/h
Single machine assembly area
40square
Processed chemical media types
Dilute acids
Plate material
316L
Monel alloy
Ahab's - 276°C
plate heat exchanger
1. Material
Plate Material
: 304(0Cr18Ni9),321(0Cr18Ni10Ti),316(0Cr17Ni12Mo2),316L(00Cr17Ni14Mo2),titanium(TA1-A),254SMO,nickel alloy
Gasket Material
: NBR rubber, EPDM RUBBER, Fluorous rubber, Neoprene rubber, silicone rubber, asbestos rubber sheet.
Rack material
: carbon steel, stainless steel, outsourcing stainless steel
Rod material
: Galvanized steel, stainless steel
Interface Material
: rubber, carbon steel, stainless
steel
Features and Applications for different material
:
Code and material
NBR rubber
EPDM rubber
Fluorous rubber
Neoprene rubber
Silicone rubber
Asbestos fiber sheet
N
E
F
C
Q
A
Applicable temperature (°C)
-20~110
-50~150
0~180
-40~100
-65~230
20~250
Tensile strength at break (MPa)
≥10
--
Elongation at break(%)
≥120
--
hardness(shore A)(degree)
75±3
80±5
80±5
75±5
60±2
--
Compression set(%)
≤15
--
Name
thickness
code
Applying range
Stainless steel
0.7~1.0
0Cr18Ni9
A working environment with serious erosion of acid or basic medium
00Cr19Ni10
0Cr17Ni12Mo2
00Cr17Ni14Mo2
Commercial pure titanium
0.6~1.0
Tal
Alkali or salt making, cryogenic freezing of sea water, and where
medium with chlorine ion erode seriously
Ultralow carbon stainless steel
0.6~1.0
00Cr18Ni14Mo2Cu2
Place has organic solvent, chlorine ion and intercrystalline corrosion
2.
Design and Selection
The plate heat exchanger produced by our company strictly follows the rule listed in GB16409-1996 "plate heat exchanger," to design, manufacture and test.Especially,it comply with international standard.
3.
Application
:
Plate heat exchanger is high-efficient and compact heat transfer equipment, applied to the technologies such as cooling, heating, evaporation, condensation, disinfection and waste heat recovery. It is widely used in petrochemical, thermal power, metallurgy, textile, food, pharmaceutical, HVAC heating, nuclear industry, shipbuilding, marine development and other fields.
4.
We are specialized in designing and manufacturing,there are 5 projects in the company at present,which divided in domestic and internaitonal market.Therefore,I firmly believe that the product have a bright prospect in the global market
.
1.Type:BL120
2.Usage:Industry
3.Plate Material:304(0Cr18Ni9)(as requested)
4.Certificate:QS and FDA
Single change plate heat area
0.07-1.6square
Single machine processing flow
50m³/h
Single machine assembly area
40square
Processed chemical media types
Dilute acids
Plate material
316L
Monel alloy
Ahab's - 276°C
plate heat exchanger
1. Material
Plate Material
: 304(0Cr18Ni9),321(0Cr18Ni10Ti),316(0Cr17Ni12Mo2),316L(00Cr17Ni14Mo2),titanium(TA1-A),254SMO,nickel alloy
Gasket Material
: NBR rubber, EPDM RUBBER, Fluorous rubber, Neoprene rubber, silicone rubber, asbestos rubber sheet.
Rack material
: carbon steel, stainless steel, outsourcing stainless steel
Rod material
: Galvanized steel, stainless steel
Interface Material
: rubber, carbon steel, stainless
steel
Features and Applications for different material
:
Code and material
NBR rubber
EPDM rubber
Fluorous rubber
Neoprene rubber
Silicone rubber
Asbestos fiber sheet
N
E
F
C
Q
A
Applicable temperature (°C)
-20~110
-50~150
0~180
-40~100
-65~230
20~250
Tensile strength at break (MPa)
≥10
--
Elongation at break(%)
≥120
--
hardness(shore A)(degree)
75±3
80±5
80±5
75±5
60±2
--
Compression set(%)
≤15
--
Name
thickness
code
Applying range
Stainless steel
0.7~1.0
0Cr18Ni9
A working environment with serious erosion of acid or basic medium
00Cr19Ni10
0Cr17Ni12Mo2
00Cr17Ni14Mo2
Commercial pure titanium
0.6~1.0
Tal
Alkali or salt making, cryogenic freezing of sea water, and where
medium with chlorine ion erode seriously
Ultralow carbon stainless steel
0.6~1.0
00Cr18Ni14Mo2Cu2
Place has organic solvent, chlorine ion and intercrystalline corrosion
2.
Design and Selection
The plate heat exchanger produced by our company strictly follows the rule listed in GB16409-1996 "plate heat exchanger," to design, manufacture and test.Especially,it comply with international standard.
3.
Application
:
Plate heat exchanger is high-efficient and compact heat transfer equipment, applied to the technologies such as cooling, heating, evaporation, condensation, disinfection and waste heat recovery. It is widely used in petrochemical, thermal power, metallurgy, textile, food, pharmaceutical, HVAC heating, nuclear industry, shipbuilding, marine development and other fields.
4.
We are specialized in designing and manufacturing,there are 5 projects in the company at present,which divided in domestic and internaitonal market.Therefore,I firmly believe that the product have a bright prospect in the global market
.
platinum & stainless steel centrifugal casting machine
Platinum casting machine is mainly used for casting platinum, palladium and stainless steel.
High frequency centrifugal casting machine
Casting time:3-5 minutes
Metal capacity: 350G.
Metal type :Platinum (PT), Palladium (PD) and stainless steel ( SS) , etc.
Centrifugal method: Crank arm centrifuge.
Centrifugal speed: Frequency conversion and adjustable.
Lifting method: Air-operated.
Shielding gas: Argon Nitrogen.
Cooling water: Either from cooling pool or water chiller
High frequency centrifugal casting machine
Casting time:3-5 minutes
Metal capacity: 350G.
Metal type :Platinum (PT), Palladium (PD) and stainless steel ( SS) , etc.
Centrifugal method: Crank arm centrifuge.
Centrifugal speed: Frequency conversion and adjustable.
Lifting method: Air-operated.
Shielding gas: Argon Nitrogen.
Cooling water: Either from cooling pool or water chiller
pneumatic hydraulic cylinder
Newly-designed cylinder,only shop air needed but high hydraulic output,energy-saving, no hydraulic system,pneumohydraulic cylind
pneumohydraulic cylinder
This Hydro-Pneumatic Cylinder represents a novel technology, where applied two techniques, namely, the speed of pneumatic action and the force developed by hydraulic, It is operated like a pneumatic cylinder and has the press force of a hydraulic cylinder. The changeover from fast to power stroke takes place automatically whenever the working rod hits an oppositing force during its fast aproach..
Operates only on shop air, without hydraulic power units.The controls are very simple, the same as for any double acting pneumatic cylinder.The operating stroke is divided into three stages:
1. air-operated approach stroke
2. pneumohydraulic powerstroke
3. air-operated return stroke
The simple design, with few moving parts, assures you of trouble-free operation for many years. The low approach forces protect your tooling and reduce the noise level.
Application:
this kind of cylinder can be used on sheet metal joining, punching, piercing, coining, marking, stamping, pressing, compressing, straightening, riveting, crimping, flaring, assembling, press-fitting, mounting, bending/edging, clamping, tensioning, peening and so on.
pneumohydraulic cylinder
This Hydro-Pneumatic Cylinder represents a novel technology, where applied two techniques, namely, the speed of pneumatic action and the force developed by hydraulic, It is operated like a pneumatic cylinder and has the press force of a hydraulic cylinder. The changeover from fast to power stroke takes place automatically whenever the working rod hits an oppositing force during its fast aproach..
Operates only on shop air, without hydraulic power units.The controls are very simple, the same as for any double acting pneumatic cylinder.The operating stroke is divided into three stages:
1. air-operated approach stroke
2. pneumohydraulic powerstroke
3. air-operated return stroke
The simple design, with few moving parts, assures you of trouble-free operation for many years. The low approach forces protect your tooling and reduce the noise level.
Application:
this kind of cylinder can be used on sheet metal joining, punching, piercing, coining, marking, stamping, pressing, compressing, straightening, riveting, crimping, flaring, assembling, press-fitting, mounting, bending/edging, clamping, tensioning, peening and so on.
pneumatic microseism squeeze machine
pneumatic microseism squeeze machine can make castings with any structure and has high work efficiency.
We have Z124 doff sand box vibration squeeze molding machine, Z146,Z147,Z148 pneumatic microseism squeeze molding machine.
The max. dimension of the inner sand box is (length x width x height):800×630×250mm;
Production efficiency: 60 cases/hour
Squeeze Force: 750kg;
Max. Draw strock: 300mm;
Compact strock: 180mm;
Air Compress Pressure: 0.6Mpa;
This machine have the advantages of many other machines and can satisfy the most customers' demands.
The squeeze system is spring cushion pneumatic microseism institution with good property and have little effect to the groundsill.
It is piston ring seal. The compact force is increased under the same air pressure. The piston life is increased.
The sand mold is compacted. The machine is single cylinder draw, so draw die placidly and sychronous. The parts have accurate draft.
We have Z124 doff sand box vibration squeeze molding machine, Z146,Z147,Z148 pneumatic microseism squeeze molding machine.
The max. dimension of the inner sand box is (length x width x height):800×630×250mm;
Production efficiency: 60 cases/hour
Squeeze Force: 750kg;
Max. Draw strock: 300mm;
Compact strock: 180mm;
Air Compress Pressure: 0.6Mpa;
This machine have the advantages of many other machines and can satisfy the most customers' demands.
The squeeze system is spring cushion pneumatic microseism institution with good property and have little effect to the groundsill.
It is piston ring seal. The compact force is increased under the same air pressure. The piston life is increased.
The sand mold is compacted. The machine is single cylinder draw, so draw die placidly and sychronous. The parts have accurate draft.
pneumatic solder bar casting machine
pneumatic solder bar casting machine is apply to tin based alloy soder bar casting .
The pneumatic solder bar casting machine is apply to tin based alloy solder bar casting .
1. Adopt Austria K460 mould steel ,treat with high temperature polishing and laser carving .Logo to be provide by buyers.
2. Pneumatic typy solder bar machine :Adopt air -pressure tip -level structure.
3. Manual solder bar machine : Adopt mould ejector structure .
4. Spare parts with machine : One content seal .
5. easy opetation , reasonable price .
The pneumatic solder bar casting machine is apply to tin based alloy solder bar casting .
1. Adopt Austria K460 mould steel ,treat with high temperature polishing and laser carving .Logo to be provide by buyers.
2. Pneumatic typy solder bar machine :Adopt air -pressure tip -level structure.
3. Manual solder bar machine : Adopt mould ejector structure .
4. Spare parts with machine : One content seal .
5. easy opetation , reasonable price .
pneumohydraulic cylinder
Newly-designed cylinder, only shop air needed but high hydraulic output, energy-saving, no hydraulic system.
pneumohydraulic cylinder
This Hydro-Pneumatic Cylinder represents a novel technology, where applied two techniques, namely, the speed of pneumatic action and the force developed by hydraulic,It is operated like a pneumatic cylinder and has the press force of a hydraulic cylinder. The changeover from fast to power stroke takes place automatically whenever the working rod hits an oppositing force during its fast aproach..
Operates only on shop air, without hydraulic power units. The controls are very simple, the same as for any double acting pneumatic cylinder.
The operating stroke is divided into three stages:
1. air-operated approach stroke
2. pneumohydraulic powerstroke
3. air-operated return stroke
The simple design, with few moving parts, assures you of trouble-free operation for many years.
The low approach forces protect your tooling and reduce the noise level.
Application:
This kind of cylinder can be used on sheet metal joining, punching/piercing, coining/marking/stamping, pressing/compressing/straightening, riveting/crimping/flaring, assembling/press-fitting/mounting, bending/edging, clamping/tensioning/peening and so on.
pneumohydraulic cylinder
This Hydro-Pneumatic Cylinder represents a novel technology, where applied two techniques, namely, the speed of pneumatic action and the force developed by hydraulic,It is operated like a pneumatic cylinder and has the press force of a hydraulic cylinder. The changeover from fast to power stroke takes place automatically whenever the working rod hits an oppositing force during its fast aproach..
Operates only on shop air, without hydraulic power units. The controls are very simple, the same as for any double acting pneumatic cylinder.
The operating stroke is divided into three stages:
1. air-operated approach stroke
2. pneumohydraulic powerstroke
3. air-operated return stroke
The simple design, with few moving parts, assures you of trouble-free operation for many years.
The low approach forces protect your tooling and reduce the noise level.
Application:
This kind of cylinder can be used on sheet metal joining, punching/piercing, coining/marking/stamping, pressing/compressing/straightening, riveting/crimping/flaring, assembling/press-fitting/mounting, bending/edging, clamping/tensioning/peening and so on.
popular sale automatic high efficiency nail making machine
high efficiency nail making machine
electric control
produce kinds of nail
light, easy to operate, high efficient
hot sell automatic high efficiency nail making machine
Features:
1)raw material : wasted material or finished steel rod
2)it can feed the material automatically.
3)the point and head of the nail can be finished at one time.
4)It has the features of high speed, high efficiency and good continuity.
Technological parameter
:
type
1C
2C
3C
4C
5C
6C
unit
Max length of nail(mm)
20
50
75
100
100--150
150---210
mm
Diameter of nail(mm)
1-1.6
1.6-2.8
1.8-3.2
2.8-4.5
4.0-5.0
5-7
mm
Nail making speed(pcs)
450
300
280
250
250
180
PCS/min
Power(kw)
1.5
2.2
3
4
5.5
11
kw
Exterior size(mm)
1350×950×1000
1650×1150×1100
1990×1200×1250
2280×1420×1330
2300×1450×1500
3510×1940×2015
mm
Weight(kg)
900
1350
1600
1900
2500
5500
Kg
electric control
produce kinds of nail
light, easy to operate, high efficient
hot sell automatic high efficiency nail making machine
Features:
1)raw material : wasted material or finished steel rod
2)it can feed the material automatically.
3)the point and head of the nail can be finished at one time.
4)It has the features of high speed, high efficiency and good continuity.
Technological parameter
:
type
1C
2C
3C
4C
5C
6C
unit
Max length of nail(mm)
20
50
75
100
100--150
150---210
mm
Diameter of nail(mm)
1-1.6
1.6-2.8
1.8-3.2
2.8-4.5
4.0-5.0
5-7
mm
Nail making speed(pcs)
450
300
280
250
250
180
PCS/min
Power(kw)
1.5
2.2
3
4
5.5
11
kw
Exterior size(mm)
1350×950×1000
1650×1150×1100
1990×1200×1250
2280×1420×1330
2300×1450×1500
3510×1940×2015
mm
Weight(kg)
900
1350
1600
1900
2500
5500
Kg
popular type automatic nail making machine with high speed
new automatic nail making machine with high speed
low consumption
high speed
attractive appearance
advanced design
new automatic nail making machine with high speed
Specifications:
Type(unit)
4C
Max length of nail ( mm )
100
Max diameter of nail ( mm )
4.0
Nail making speed ( Pcs / min )
250
Motor power (kw)
3
Weight ( kg )
1900
overall dimension ( mm )
2280*1420*1330
Features:
This new type machine adopts plunger and oil pipe lubricating structure to ensure the high working speed, low noise and less impact. It has the features of advanced design, compact conformation, and attractive appearance. It is easy and safe to operate.
The automatic nail making machine is a special purpose machine which is designed for processing various size of nails. The assortment of our products is complete . The nail machine is used for producing various nails and special nails . It has wide uses,simple operation , and reliable run . We will supply various machine fittings and necessary fine auxiliaries for you .
low consumption
high speed
attractive appearance
advanced design
new automatic nail making machine with high speed
Specifications:
Type(unit)
4C
Max length of nail ( mm )
100
Max diameter of nail ( mm )
4.0
Nail making speed ( Pcs / min )
250
Motor power (kw)
3
Weight ( kg )
1900
overall dimension ( mm )
2280*1420*1330
Features:
This new type machine adopts plunger and oil pipe lubricating structure to ensure the high working speed, low noise and less impact. It has the features of advanced design, compact conformation, and attractive appearance. It is easy and safe to operate.
The automatic nail making machine is a special purpose machine which is designed for processing various size of nails. The assortment of our products is complete . The nail machine is used for producing various nails and special nails . It has wide uses,simple operation , and reliable run . We will supply various machine fittings and necessary fine auxiliaries for you .
portable sand blasting pot
1. Easy operation
2.Convenient for carry
Portable sand blast pot
Characteristic:
Pressurized design 30% more sandblasting power than siphon units
Provides more abrasive when you need truly effcient performance
Equipped with a nozzle and shut-off valve, pressure gauge, ceramic nozzle, 2.5m hose, filling funnel, watertrap, 6" rubber wheels and canvas hood
2.Convenient for carry
Portable sand blast pot
Characteristic:
Pressurized design 30% more sandblasting power than siphon units
Provides more abrasive when you need truly effcient performance
Equipped with a nozzle and shut-off valve, pressure gauge, ceramic nozzle, 2.5m hose, filling funnel, watertrap, 6" rubber wheels and canvas hood
Anping ShengHua NWJ series heavy weaving mesh machine
the high output
the shortest deliver time
the best quality for your evaluation
pretty competitive price
NWJ series weaving mesh machine
1, Characteristics and usage
The NWJ heavy metal mesh weaving mesh machine is to meet the marker demand, and it has filled the blank of the domestic market. It uses the machine volume net, mastle shuttle, treads the plate to hang the synthesis, the doubles latitude structure, has strong working ability, structure, has the strong, bearing capacity, big silk number density scope width etc. We can weave the wire diameter of 0.1-1.6mm more than 2 meshes, all kinds of metal wire mesh.
2, Main technical parameter
A, the breadth of weaving: 1600mm (1650mm)--3200mm (3250mm) 4000mm--6000mm
B, aperture: tread the plate to hang the synthesis structure
C, crank rotational speed: 28-30circle/minute
D, electric machinery power: 7.5KW, 1440 circles/minute
E, the weight of machines: 11 tons
F, external size: length: 3500mm width: 4500mm height: 2500mm
the shortest deliver time
the best quality for your evaluation
pretty competitive price
NWJ series weaving mesh machine
1, Characteristics and usage
The NWJ heavy metal mesh weaving mesh machine is to meet the marker demand, and it has filled the blank of the domestic market. It uses the machine volume net, mastle shuttle, treads the plate to hang the synthesis, the doubles latitude structure, has strong working ability, structure, has the strong, bearing capacity, big silk number density scope width etc. We can weave the wire diameter of 0.1-1.6mm more than 2 meshes, all kinds of metal wire mesh.
2, Main technical parameter
A, the breadth of weaving: 1600mm (1650mm)--3200mm (3250mm) 4000mm--6000mm
B, aperture: tread the plate to hang the synthesis structure
C, crank rotational speed: 28-30circle/minute
D, electric machinery power: 7.5KW, 1440 circles/minute
E, the weight of machines: 11 tons
F, external size: length: 3500mm width: 4500mm height: 2500mm
pouring technology machine
Method: according to the principle of production craft foam plastic made EPC first model (manual, mechanical), besmear after dry
Method: according to the principle of production craft foam plastic made EPC first model (manual, mechanical), besmear after drying, hang special coatings, placed in special cases, sand fill dry sand, vibration compaction, vacuum casting, metal liquid vaporization model, model with displacement, duplicate model of plastic foam casting.
Process: 1, make plastic foam die.it gating system, gasification combined mold surface brushes, high temperature resistant coatings and special spray drying. 2 will be special sand box in vibration isolation layer on the job, and fill in the bottom sand vibration compaction (dry sand) and drying, will put in sand mold gasification, fill dry sand, micro vibration appropriate time to shave flat boxes. 3 with plastic film mulching, basin, vacuum, vacuum suction system after fastening dry sand, casting, metal die.it gasification disappear, replaced its position. 4 release, vacuum casting after condensation, from loose dry sand casting out.
Technical advantage: the epc process sets of epc casting method, V, adapt to the advantages in steel, cast iron, bronze, aluminum etc. Various brands, various material, different structure of large, medium and small all kinds of casting. Use dry sand fixation, prototype it, High precision castings, uniform, real cases, casting no flash, burr, Surface smoothness close precision casting, internal structure stability, eliminate or reduce the blisters, casting defects, waiting in the whole production process, no environmental pollution level.
Method: according to the principle of production craft foam plastic made EPC first model (manual, mechanical), besmear after drying, hang special coatings, placed in special cases, sand fill dry sand, vibration compaction, vacuum casting, metal liquid vaporization model, model with displacement, duplicate model of plastic foam casting.
Process: 1, make plastic foam die.it gating system, gasification combined mold surface brushes, high temperature resistant coatings and special spray drying. 2 will be special sand box in vibration isolation layer on the job, and fill in the bottom sand vibration compaction (dry sand) and drying, will put in sand mold gasification, fill dry sand, micro vibration appropriate time to shave flat boxes. 3 with plastic film mulching, basin, vacuum, vacuum suction system after fastening dry sand, casting, metal die.it gasification disappear, replaced its position. 4 release, vacuum casting after condensation, from loose dry sand casting out.
Technical advantage: the epc process sets of epc casting method, V, adapt to the advantages in steel, cast iron, bronze, aluminum etc. Various brands, various material, different structure of large, medium and small all kinds of casting. Use dry sand fixation, prototype it, High precision castings, uniform, real cases, casting no flash, burr, Surface smoothness close precision casting, internal structure stability, eliminate or reduce the blisters, casting defects, waiting in the whole production process, no environmental pollution level.
power press,,,
product name: power press;
most competitive price & highest quality provided for every buyer.
Product Name:
power press
;
Usage:
JZ series of sizing presses are suitable for axle box,alone step powder metallurgy products to shape.
Characteristics:
(1)
The presses adopt crank driving,dipping frame,crosshead guiding device and die set for special using,guarantee it is reliable for presses to work,and the precision of the products is high,the consistency too.
(2)
It is easy to build-up and debug for the die set.There are two kinds of working ways that upper core rod or lower core rod fixing.
(3)
Adopt machinery,pneumatic,electric apparatus to combine rationally,so can realize the full-automatic of entry materials,feeding,sizing and coining.
(4)
The presses can be additional set up the lacking materials monitor and the knocking face device in accordance with customers.
(5)
We can produce the safe type hand sizing press in accordance with the customers.
Specification
Type
SPJ-50
SPJ-100
SPJ-150
SPJ-250
SPJ-400
SPJ-630
Max pressing force
KN
50
100
150
250
400
600
Max upper ram stroke
mm
45
50
65
90
120
140
Max coining height
mm
10
20
35
45
60
80
Strokes
n/min
20-60
20-60
20-50
20-45
15-40
15-30
Max open height
mm
100
120
140
160
200
250
Motor power
KW
1.1
1.1
2.2
2.2
5.5
7.5
Machine weight
Kg
500
820
1150
2100
3550
5000
Dimension[LxWxH]
mm
1300*750
*1600
1650*900
*1750
1850*1050
*1920
2000*1220
*2150
2100*1300
*2400
2300*1450
*2800
For more information, please contact us today!
most competitive price & highest quality provided for every buyer.
Product Name:
power press
;
Usage:
JZ series of sizing presses are suitable for axle box,alone step powder metallurgy products to shape.
Characteristics:
(1)
The presses adopt crank driving,dipping frame,crosshead guiding device and die set for special using,guarantee it is reliable for presses to work,and the precision of the products is high,the consistency too.
(2)
It is easy to build-up and debug for the die set.There are two kinds of working ways that upper core rod or lower core rod fixing.
(3)
Adopt machinery,pneumatic,electric apparatus to combine rationally,so can realize the full-automatic of entry materials,feeding,sizing and coining.
(4)
The presses can be additional set up the lacking materials monitor and the knocking face device in accordance with customers.
(5)
We can produce the safe type hand sizing press in accordance with the customers.
Specification
Type
SPJ-50
SPJ-100
SPJ-150
SPJ-250
SPJ-400
SPJ-630
Max pressing force
KN
50
100
150
250
400
600
Max upper ram stroke
mm
45
50
65
90
120
140
Max coining height
mm
10
20
35
45
60
80
Strokes
n/min
20-60
20-60
20-50
20-45
15-40
15-30
Max open height
mm
100
120
140
160
200
250
Motor power
KW
1.1
1.1
2.2
2.2
5.5
7.5
Machine weight
Kg
500
820
1150
2100
3550
5000
Dimension[LxWxH]
mm
1300*750
*1600
1650*900
*1750
1850*1050
*1920
2000*1220
*2150
2100*1300
*2400
2300*1450
*2800
For more information, please contact us today!
power press,
product name: power press;
most competitive price & highest quality provided for every buyer.
Product Name:
power press
;
Usage:
JZ series of sizing presses are suitable for axle box,alone step powder metallurgy products to shape.
Characteristics:
(1)
The presses adopt crank driving,dipping frame,crosshead guiding device and die set for special using,guarantee it is reliable for presses to work,and the precision of the products is high,the consistency too.
(2)
It is easy to build-up and debug for the die set.There are two kinds of working ways that upper core rod or lower core rod fixing.
(3)
Adopt machinery,pneumatic,electric apparatus to combine rationally,so can realize the full-automatic of entry materials,feeding,sizing and coining.
(4)
The presses can be additional set up the lacking materials monitor and the knocking face device in accordance with customers.
(5)
We can produce the safe type hand sizing press in accordance with the customers.
Specification
Type
SPJ-50
SPJ-100
SPJ-150
SPJ-250
SPJ-400
SPJ-630
Max pressing force
KN
50
100
150
250
400
600
Max upper ram stroke
mm
45
50
65
90
120
140
Max coining height
mm
10
20
35
45
60
80
Strokes
n/min
20-60
20-60
20-50
20-45
15-40
15-30
Max open height
mm
100
120
140
160
200
250
Motor power
KW
1.1
1.1
2.2
2.2
5.5
7.5
Machine weight
Kg
500
820
1150
2100
3550
5000
Dimension[LxWxH]
mm
1300*750
*1600
1650*900
*1750
1850*1050
*1920
2000*1220
*2150
2100*1300
*2400
2300*1450
*2800
For more information, please contact us today!
most competitive price & highest quality provided for every buyer.
Product Name:
power press
;
Usage:
JZ series of sizing presses are suitable for axle box,alone step powder metallurgy products to shape.
Characteristics:
(1)
The presses adopt crank driving,dipping frame,crosshead guiding device and die set for special using,guarantee it is reliable for presses to work,and the precision of the products is high,the consistency too.
(2)
It is easy to build-up and debug for the die set.There are two kinds of working ways that upper core rod or lower core rod fixing.
(3)
Adopt machinery,pneumatic,electric apparatus to combine rationally,so can realize the full-automatic of entry materials,feeding,sizing and coining.
(4)
The presses can be additional set up the lacking materials monitor and the knocking face device in accordance with customers.
(5)
We can produce the safe type hand sizing press in accordance with the customers.
Specification
Type
SPJ-50
SPJ-100
SPJ-150
SPJ-250
SPJ-400
SPJ-630
Max pressing force
KN
50
100
150
250
400
600
Max upper ram stroke
mm
45
50
65
90
120
140
Max coining height
mm
10
20
35
45
60
80
Strokes
n/min
20-60
20-60
20-50
20-45
15-40
15-30
Max open height
mm
100
120
140
160
200
250
Motor power
KW
1.1
1.1
2.2
2.2
5.5
7.5
Machine weight
Kg
500
820
1150
2100
3550
5000
Dimension[LxWxH]
mm
1300*750
*1600
1650*900
*1750
1850*1050
*1920
2000*1220
*2150
2100*1300
*2400
2300*1450
*2800
For more information, please contact us today!
practical cooling tower for aluminum
practical cooling tower for aluminum
1.Type:QBXXTZH7.5-10000(as requested)
2.Type of Driving:Direct/Strap
3.Motor:380/3PH
practical cooling tower for aluminum
(A)Features
1.The curve grain is used on the radiator fin to be effectiely extend contact and thermal exchange
between water circulation and cooling wind in the cooling tower,making the air flow in the tower
is more reasonable and reducing the air resistance to the minimal level.
2.The blower ,running more stably,reducing the noise ,and improving the cooling efficiency greatly
3.The housing of cooling tower is made from top-grade,high strength glass fiber reinforced plastics.which can be resistant to the erosion from
natural factors and chemical substances .Keeping fresh with the time going;All the galvanized steel plates
are resistant to oxidation and erosion in conformity to the British standard BESENISO1461:1999,
which made the product become more solid and durable
4.This brand of cooling tower is provided with an observation window and water suction and filtering net
so as to observe the running condition and guarantee the cleanness of backwater.
QB-XXTZ(H)Technical Parameter
MODEL
QB
100
125
150
175
200
225
250
300
Runoff
m³/h
78.12
97.56
117
136.8
156.24
175.5
195.12
234
Air volume
CMM
700
830
950
1150
1250
1500
1750
2000
Voice level
KW
3
3
3
4
4
5.5
5.5
7.5
Net weight
dBA
60
60
60
60
60
54
55
56
Moving weight
KG
500
540
580
860
880
1050
1080
1760
water inlet
KG
1600
1640
1680
1960
1980
2770
2800
3930
water outlet
WI
125
125
150
150
150
200
200
200
overflow
WO
125
125
150
150
150
200
200
200
drainage
OF
25
25
25
50
50
80
80
80
flow valve
DR
25
25
25
50
50
80
80
80
tower
FV
20
20
20
25
25
32
32
32
motor
TH
2690
2875
2875
25
25
32
32
32
casing
MH
320
320
320
3515
3515
4170
4170
4360
air inlet
CH
1595
1780
1780
350
350
590
590
680
water basin
AH
325
325
325
1965
1965
2060
2060
2160
water inlet
WH
450
450
450
1000
1000
1100
1100
1100
waterloutlet
IH
300
300
300
350
350
620
620
620
groundwork
OH
230
230
230
850
850
900
900
900
exhaust fan
FH
300
300
300
245
245
280
280
280
water basin
ED
1450
1450
1450
300
300
300
300
300
groundwork
WD
2900
2900
2900
1750
1750
2135
2135
2440
screw
FD
2320
2320
2320
3310
3310
4120
4120
4730
groundwork
BD
12*6
12*6
12*6
3310
3310
4120
4120
4730
screw
FS
300
300
300
16*8
16*8
16*12
16*12
14*12
groundwork center
PC
600
600
600
300
300
300
300
300
plate L
BC
210
210
210
600
600
600
600
600
plate W
SC
130
130
130
180
180
180
180
180
plate C
SL
140
140
140
150
150
150
150
150
screw
BC
1145
1145
1145
400
400
800
800
800
late center
SC
180
180
180
2598
2598
2156
2156
2475
Socket L
SL
1430
1430
1430
740
740
840
840
840
1.Type:QBXXTZH7.5-10000(as requested)
2.Type of Driving:Direct/Strap
3.Motor:380/3PH
practical cooling tower for aluminum
(A)Features
1.The curve grain is used on the radiator fin to be effectiely extend contact and thermal exchange
between water circulation and cooling wind in the cooling tower,making the air flow in the tower
is more reasonable and reducing the air resistance to the minimal level.
2.The blower ,running more stably,reducing the noise ,and improving the cooling efficiency greatly
3.The housing of cooling tower is made from top-grade,high strength glass fiber reinforced plastics.which can be resistant to the erosion from
natural factors and chemical substances .Keeping fresh with the time going;All the galvanized steel plates
are resistant to oxidation and erosion in conformity to the British standard BESENISO1461:1999,
which made the product become more solid and durable
4.This brand of cooling tower is provided with an observation window and water suction and filtering net
so as to observe the running condition and guarantee the cleanness of backwater.
QB-XXTZ(H)Technical Parameter
MODEL
QB
100
125
150
175
200
225
250
300
Runoff
m³/h
78.12
97.56
117
136.8
156.24
175.5
195.12
234
Air volume
CMM
700
830
950
1150
1250
1500
1750
2000
Voice level
KW
3
3
3
4
4
5.5
5.5
7.5
Net weight
dBA
60
60
60
60
60
54
55
56
Moving weight
KG
500
540
580
860
880
1050
1080
1760
water inlet
KG
1600
1640
1680
1960
1980
2770
2800
3930
water outlet
WI
125
125
150
150
150
200
200
200
overflow
WO
125
125
150
150
150
200
200
200
drainage
OF
25
25
25
50
50
80
80
80
flow valve
DR
25
25
25
50
50
80
80
80
tower
FV
20
20
20
25
25
32
32
32
motor
TH
2690
2875
2875
25
25
32
32
32
casing
MH
320
320
320
3515
3515
4170
4170
4360
air inlet
CH
1595
1780
1780
350
350
590
590
680
water basin
AH
325
325
325
1965
1965
2060
2060
2160
water inlet
WH
450
450
450
1000
1000
1100
1100
1100
waterloutlet
IH
300
300
300
350
350
620
620
620
groundwork
OH
230
230
230
850
850
900
900
900
exhaust fan
FH
300
300
300
245
245
280
280
280
water basin
ED
1450
1450
1450
300
300
300
300
300
groundwork
WD
2900
2900
2900
1750
1750
2135
2135
2440
screw
FD
2320
2320
2320
3310
3310
4120
4120
4730
groundwork
BD
12*6
12*6
12*6
3310
3310
4120
4120
4730
screw
FS
300
300
300
16*8
16*8
16*12
16*12
14*12
groundwork center
PC
600
600
600
300
300
300
300
300
plate L
BC
210
210
210
600
600
600
600
600
plate W
SC
130
130
130
180
180
180
180
180
plate C
SL
140
140
140
150
150
150
150
150
screw
BC
1145
1145
1145
400
400
800
800
800
late center
SC
180
180
180
2598
2598
2156
2156
2475
Socket L
SL
1430
1430
1430
740
740
840
840
840
precise molding machine
1.apopt Siemens touch screen
2.PLC
3.high precision
4.high automation
5.joint deviatio-no more than 0.1mm
Main specifications
No.
Specifications
Unit
Model
Z6048
Z6553
Z7553
Z7560
Z7562
1
molding
capacity
molding without core
mold/h
360
360
340
340
340
molding with core
mold/h
300
300
290
290
290
2
mold dimension
height
mm
480
535
535
600
620
width
mm
600
650
750
750
750
thickness
mm
150-340
150-340
150-340
150-350
150-350
3
joint deviation
mm
0.1
0.1
0.1
0.1
0.1
4
max length of transmission
m
80
80
80
80
80
5
max cooling time
min
70
70
70
70
70
6
max sand consumption
T/h
49-54
60-66
65-72
90-100
100-110
7
max electricity consumption
kw
67
67
67
67
67
8
air consumption
M
3
/min
15
15
15
15
15
9
water consumption
L/min
50
50
50
50
50
10
compact pressure
kg/cm
2
14
16
16
16
16
11
pattern compativity with DISA
MATIC2013
DISA231A
DISA231B
DISA231X
12
gross weight
T
20
22
24
25
25
13
main elements
1.Injection System
2.AMC and SBC
3.Electrical Contral Equipment
We have used reference of abroad advanced designing concept and manufaturing experience to make the new vertical automatice molding machine,which includes the main machine,clamp mold transport conveyor and belt mold cooling conveyor.The machine has "4 high and 1 low "feature- high configuration,high efficency,high precision,high life span and low down time.
Import USA pump --Parker T6EE Electrical control panel
2.PLC
3.high precision
4.high automation
5.joint deviatio-no more than 0.1mm
Main specifications
No.
Specifications
Unit
Model
Z6048
Z6553
Z7553
Z7560
Z7562
1
molding
capacity
molding without core
mold/h
360
360
340
340
340
molding with core
mold/h
300
300
290
290
290
2
mold dimension
height
mm
480
535
535
600
620
width
mm
600
650
750
750
750
thickness
mm
150-340
150-340
150-340
150-350
150-350
3
joint deviation
mm
0.1
0.1
0.1
0.1
0.1
4
max length of transmission
m
80
80
80
80
80
5
max cooling time
min
70
70
70
70
70
6
max sand consumption
T/h
49-54
60-66
65-72
90-100
100-110
7
max electricity consumption
kw
67
67
67
67
67
8
air consumption
M
3
/min
15
15
15
15
15
9
water consumption
L/min
50
50
50
50
50
10
compact pressure
kg/cm
2
14
16
16
16
16
11
pattern compativity with DISA
MATIC2013
DISA231A
DISA231B
DISA231X
12
gross weight
T
20
22
24
25
25
13
main elements
1.Injection System
2.AMC and SBC
3.Electrical Contral Equipment
We have used reference of abroad advanced designing concept and manufaturing experience to make the new vertical automatice molding machine,which includes the main machine,clamp mold transport conveyor and belt mold cooling conveyor.The machine has "4 high and 1 low "feature- high configuration,high efficency,high precision,high life span and low down time.
Import USA pump --Parker T6EE Electrical control panel
precise molding system
1.apopt Siemens touch screen
2.PLC
3.high precision
4.high automation
5.joint deviatio-no more than 0.1mm
The machine has "4 high and 1 low "feature-
high configuration,
high efficency,
high precision,
high life span
low down time.
Main specifications
No.
Specifications
Unit
Model
Z6048
Z6553
Z7553
Z7560
Z7562
1
molding
capacity
molding without core
mold/h
360
360
340
340
340
molding with core
mold/h
300
300
290
290
290
2
mold dimension
height
mm
480
535
535
600
620
width
mm
600
650
750
750
750
thickness
mm
150-340
150-340
150-340
150-350
150-350
3
joint deviation
mm
0.1
0.1
0.1
0.1
0.1
4
max length of transmission
m
80
80
80
80
80
5
max cooling time
min
70
70
70
70
70
6
max sand consumption
T/h
49-54
60-66
65-72
90-100
100-110
7
max electricity consumption
kw
67
67
67
67
67
8
air consumption
M
3
/min
15
15
15
15
15
9
water consumption
L/min
50
50
50
50
50
10
compact pressure
kg/cm
2
14
16
16
16
16
11
pattern compativity with DISA
MATIC2013
DISA231A
DISA231B
DISA231X
12
gross weight
T
20
22
24
25
25
13
main elements
1.Injection System
2.AMC and SBC
3.Electrical Contral Equipment
We have used reference of abroad advanced designing concept and manufaturing experience to make the new vertical automatice molding machine,which includes the main machine,clamp mold transport conveyor and belt mold cooling conveyor.
2.PLC
3.high precision
4.high automation
5.joint deviatio-no more than 0.1mm
The machine has "4 high and 1 low "feature-
high configuration,
high efficency,
high precision,
high life span
low down time.
Main specifications
No.
Specifications
Unit
Model
Z6048
Z6553
Z7553
Z7560
Z7562
1
molding
capacity
molding without core
mold/h
360
360
340
340
340
molding with core
mold/h
300
300
290
290
290
2
mold dimension
height
mm
480
535
535
600
620
width
mm
600
650
750
750
750
thickness
mm
150-340
150-340
150-340
150-350
150-350
3
joint deviation
mm
0.1
0.1
0.1
0.1
0.1
4
max length of transmission
m
80
80
80
80
80
5
max cooling time
min
70
70
70
70
70
6
max sand consumption
T/h
49-54
60-66
65-72
90-100
100-110
7
max electricity consumption
kw
67
67
67
67
67
8
air consumption
M
3
/min
15
15
15
15
15
9
water consumption
L/min
50
50
50
50
50
10
compact pressure
kg/cm
2
14
16
16
16
16
11
pattern compativity with DISA
MATIC2013
DISA231A
DISA231B
DISA231X
12
gross weight
T
20
22
24
25
25
13
main elements
1.Injection System
2.AMC and SBC
3.Electrical Contral Equipment
We have used reference of abroad advanced designing concept and manufaturing experience to make the new vertical automatice molding machine,which includes the main machine,clamp mold transport conveyor and belt mold cooling conveyor.
precision casting part
1.High quality and prompt delivery;
2.ISO2001:2008,casting and machining;
3.Stainless steel investment casting;
4.Casting OEM
Main product:
pressure transmitter castings, flow instruments, steam turbine blades, automotive castings, marine components, military components.
Raw material
:
SS304, SS316 ,SS316L , CF-8M, CF-8C, CF-8, 1Cr18Ni9Ti,1Cr13,, CF-8C, 1Cr18Ni9Ti,1Cr13,40 Cr, 440C, 1.4408, 45#
Quality certificate
:
Passed ISO9000:2008; Obtained TUV certification of PED; Draw TS16949 into management in 2010.
Production capacity:
four manufacturing workshops: Two production lines in the precision casting division, CNC division, die making division, steam turbine blades machining division. The annual capacity of investment casting is 1000 tons, including 100,000pcs steam turbine blades.
Production facility
Locate
Description
QTY
Remark
Precision casting division
Wax injection machine
14
Max 50 tons
Roasting furnace
7
200Kg
Heat treatment furnace
5
Pit furnace
1
Shell-making production line
2
Sand blasting machine
4
CNC division
CNC machining center
3
One is 4 axis
CNC
12
Lathe
2
Milling machine
1
Ultrasonic cleaning
1
Drying machine
1
Steam turbine blades division
CNC machining center
7
All is 4 axis
Vertical lathe
1
C5225E
Milling machine
6
Lathe
1
Grinding machine
1
Polishing machine
36
Die making division
Lathe
4
Milling machine
5
Drilling machine
3
Boring machine
1
Wire electrode cutting
8
Grinding machine
4
CNC machining center
1
Electric spark
1
2.ISO2001:2008,casting and machining;
3.Stainless steel investment casting;
4.Casting OEM
Main product:
pressure transmitter castings, flow instruments, steam turbine blades, automotive castings, marine components, military components.
Raw material
:
SS304, SS316 ,SS316L , CF-8M, CF-8C, CF-8, 1Cr18Ni9Ti,1Cr13,, CF-8C, 1Cr18Ni9Ti,1Cr13,40 Cr, 440C, 1.4408, 45#
Quality certificate
:
Passed ISO9000:2008; Obtained TUV certification of PED; Draw TS16949 into management in 2010.
Production capacity:
four manufacturing workshops: Two production lines in the precision casting division, CNC division, die making division, steam turbine blades machining division. The annual capacity of investment casting is 1000 tons, including 100,000pcs steam turbine blades.
Production facility
Locate
Description
QTY
Remark
Precision casting division
Wax injection machine
14
Max 50 tons
Roasting furnace
7
200Kg
Heat treatment furnace
5
Pit furnace
1
Shell-making production line
2
Sand blasting machine
4
CNC division
CNC machining center
3
One is 4 axis
CNC
12
Lathe
2
Milling machine
1
Ultrasonic cleaning
1
Drying machine
1
Steam turbine blades division
CNC machining center
7
All is 4 axis
Vertical lathe
1
C5225E
Milling machine
6
Lathe
1
Grinding machine
1
Polishing machine
36
Die making division
Lathe
4
Milling machine
5
Drilling machine
3
Boring machine
1
Wire electrode cutting
8
Grinding machine
4
CNC machining center
1
Electric spark
1
precision die casting
1.High quality and prompt delivery;
2.ISO2001:2008,casting and machining;
3.Stainless steel investment casting;
4.Casting OEM
Main product:
pressure transmitter castings, flow instruments, steam turbine blades, automotive castings, marine components, military components.
Raw material
:
SS304, SS316 ,SS316L , CF-8M, CF-8C, CF-8, 1Cr18Ni9Ti,1Cr13,, CF-8C, 1Cr18Ni9Ti,1Cr13,40 Cr, 440C, 1.4408, 45#
Quality certificate
:
Passed ISO9000:2008; Obtained TUV certification of PED; Draw TS16949 into management in 2010.
Production capacity:
four manufacturing workshops: Two production lines in the precision casting division, CNC division, die making division, steam turbine blades machining division. The annual capacity of investment casting is 1000 tons, including 100,000pcs steam turbine blades.
Production facility
Locate
Description
QTY
Remark
Precision casting division
Wax injection machine
14
Max 50 tons
Roasting furnace
7
200Kg
Heat treatment furnace
5
Pit furnace
1
Shell-making production line
2
Sand blasting machine
4
CNC division
CNC machining center
3
One is 4 axis
CNC
12
Lathe
2
Milling machine
1
Ultrasonic cleaning
1
Drying machine
1
Steam turbine blades division
CNC machining center
7
All is 4 axis
Vertical lathe
1
C5225E
Milling machine
6
Lathe
1
Grinding machine
1
Polishing machine
36
Die making division
Lathe
4
Milling machine
5
Drilling machine
3
Boring machine
1
Wire electrode cutting
8
Grinding machine
4
CNC machining center
1
Electric spark
1
2.ISO2001:2008,casting and machining;
3.Stainless steel investment casting;
4.Casting OEM
Main product:
pressure transmitter castings, flow instruments, steam turbine blades, automotive castings, marine components, military components.
Raw material
:
SS304, SS316 ,SS316L , CF-8M, CF-8C, CF-8, 1Cr18Ni9Ti,1Cr13,, CF-8C, 1Cr18Ni9Ti,1Cr13,40 Cr, 440C, 1.4408, 45#
Quality certificate
:
Passed ISO9000:2008; Obtained TUV certification of PED; Draw TS16949 into management in 2010.
Production capacity:
four manufacturing workshops: Two production lines in the precision casting division, CNC division, die making division, steam turbine blades machining division. The annual capacity of investment casting is 1000 tons, including 100,000pcs steam turbine blades.
Production facility
Locate
Description
QTY
Remark
Precision casting division
Wax injection machine
14
Max 50 tons
Roasting furnace
7
200Kg
Heat treatment furnace
5
Pit furnace
1
Shell-making production line
2
Sand blasting machine
4
CNC division
CNC machining center
3
One is 4 axis
CNC
12
Lathe
2
Milling machine
1
Ultrasonic cleaning
1
Drying machine
1
Steam turbine blades division
CNC machining center
7
All is 4 axis
Vertical lathe
1
C5225E
Milling machine
6
Lathe
1
Grinding machine
1
Polishing machine
36
Die making division
Lathe
4
Milling machine
5
Drilling machine
3
Boring machine
1
Wire electrode cutting
8
Grinding machine
4
CNC machining center
1
Electric spark
1
Sunday, January 30, 2011
precision machinery component
precision machinery components
1 TS16949 ISO9001:2000
2 Process: sand casting
3Standard: JIS, DIN, ASTM,BS
4 OEM service
precision machinery components
We can offer Casting sand casting parts according to your requirement
1.TS16949
2.OEM service available
3.Materials:
Cast Iron: Grey Iron castings/Gray Iron Castings, Malleable Iron Castings, Ductile Iron Castings, with Coated Sand Casting & Green Resin Sand Castings & Sand Castings&stainless steel carbon steel aluminium etc.
4.Process: sand casting
5.Weight range: 1KG-2TON
6.Application: Industrial parts, Machinery parts, hardware, construction parts, valve/valve parts,train,craft,doorhandle,hinge,hydraulicpressure,construction,agricultural machinery
7.Small orders accepted
8.Make machining service as your requirement or drawings
9.Professional service
10.Surface treatment,painting,zinc plating,machining center,,powder coating,Shot Blast,ect.
11.High quality and after sale service
12.Satisfying customers
1.We have advanced technical equipments ,riched engineers, experienced workers
2.All products are strictly inspected by operator and QC
3.Our quality management system is in conformance with ISO9001:2000
,
1 TS16949 ISO9001:2000
2 Process: sand casting
3Standard: JIS, DIN, ASTM,BS
4 OEM service
precision machinery components
We can offer Casting sand casting parts according to your requirement
1.TS16949
2.OEM service available
3.Materials:
Cast Iron: Grey Iron castings/Gray Iron Castings, Malleable Iron Castings, Ductile Iron Castings, with Coated Sand Casting & Green Resin Sand Castings & Sand Castings&stainless steel carbon steel aluminium etc.
4.Process: sand casting
5.Weight range: 1KG-2TON
6.Application: Industrial parts, Machinery parts, hardware, construction parts, valve/valve parts,train,craft,doorhandle,hinge,hydraulicpressure,construction,agricultural machinery
7.Small orders accepted
8.Make machining service as your requirement or drawings
9.Professional service
10.Surface treatment,painting,zinc plating,machining center,,powder coating,Shot Blast,ect.
11.High quality and after sale service
12.Satisfying customers
1.We have advanced technical equipments ,riched engineers, experienced workers
2.All products are strictly inspected by operator and QC
3.Our quality management system is in conformance with ISO9001:2000
,
Anping ShengHua NWJ series heavy weaving mesh machine
the high output
the shortest deliver time
the best quality for your evaluation
pretty competitive price
NWJ series weaving mesh machine
1, Characteristics and usage
The NWJ heavy metal mesh weaving mesh machine is to meet the marker demand, and it has filled the blank of the domestic market. It uses the machine volume net, mastle shuttle, treads the plate to hang the synthesis, the doubles latitude structure, has strong working ability, structure, has the strong, bearing capacity, big silk number density scope width etc. We can weave the wire diameter of 0.1-1.6mm more than 2 meshes, all kinds of metal wire mesh.
2, Main technical parameter
A, the breadth of weaving: 1600mm (1650mm)--3200mm (3250mm) 4000mm--6000mm
B, aperture: tread the plate to hang the synthesis structure
C, crank rotational speed: 28-30circle/minute
D, electric machinery power: 7.5KW, 1440 circles/minute
E, the weight of machines: 11 tons
F, external size: length: 3500mm width: 4500mm height: 2500mm
the shortest deliver time
the best quality for your evaluation
pretty competitive price
NWJ series weaving mesh machine
1, Characteristics and usage
The NWJ heavy metal mesh weaving mesh machine is to meet the marker demand, and it has filled the blank of the domestic market. It uses the machine volume net, mastle shuttle, treads the plate to hang the synthesis, the doubles latitude structure, has strong working ability, structure, has the strong, bearing capacity, big silk number density scope width etc. We can weave the wire diameter of 0.1-1.6mm more than 2 meshes, all kinds of metal wire mesh.
2, Main technical parameter
A, the breadth of weaving: 1600mm (1650mm)--3200mm (3250mm) 4000mm--6000mm
B, aperture: tread the plate to hang the synthesis structure
C, crank rotational speed: 28-30circle/minute
D, electric machinery power: 7.5KW, 1440 circles/minute
E, the weight of machines: 11 tons
F, external size: length: 3500mm width: 4500mm height: 2500mm
preservation shot blast line
steel sheet shot blasting machine:steel sheet blasting pre-treament line are mainly consist of warm-up, shot blasting
1 shot blasting machinery long life time
2 CE certificate and ISO9001 certificate
3 competitive price
steel pipe surface shot blasting machinery
The series of QG inner and outer walls special shot blasting machine for surface treatment,wiping up the oxide coating, welding slag, appearing the metallic sheen,increasing the area of the surface, which is in favor of UV. It applies in the line of petroleum &chemical,steel,city group heating,group drainage ect.
Type
(mm)
cleaning size
(m/min)
cleaning
speed
QGW100
50-300
2-10
inner walls of
shot blasting
machine
QGW720
159-720
2-6
QGW1200
219-1016
1-6
QGW1500
325-1600
1-6
QGW2800
1016-2800
1-2
QGN100
50-300
1-4
()
Outer walls of shot blasting machine
QGN700
325-720
1-2
QGN1000
720-1016
1-4
QGN1500
1016-1500
1-4
Shandong Kaitai Shot-blasting Machinery Co.,Ltd is a professional enterprise which integrates with technical research, development, production, installation, and debugging. Cooperated with machinery college of Jinan University, we have developed cleaning and intensification equipment of shot-blasting and shot-peening.
The company has first-class technology research-development center and well-developed quality management system, and we have passed ISO9001 international quality system certification. Our company is the National Blasting & Peening Standardization Technology Committee Unit. And the company takes part in and sets down the national standard Parabolic Shot Equipment General Technical Conditions All products apply CAD computer-aided design, the appearance applies three-dimensional software design, and key components of numerical simulation use finite element analysis.
Our main products are cleaning machinesand-peening equipmentenviroment-protection and dust-removal equipment,and offer the ideal key equipments to casting, forging and heat treatment, steel structure, container, machinery, locomotive, the machine tool industry.
1 shot blasting machinery long life time
2 CE certificate and ISO9001 certificate
3 competitive price
steel pipe surface shot blasting machinery
The series of QG inner and outer walls special shot blasting machine for surface treatment,wiping up the oxide coating, welding slag, appearing the metallic sheen,increasing the area of the surface, which is in favor of UV. It applies in the line of petroleum &chemical,steel,city group heating,group drainage ect.
Type
(mm)
cleaning size
(m/min)
cleaning
speed
QGW100
50-300
2-10
inner walls of
shot blasting
machine
QGW720
159-720
2-6
QGW1200
219-1016
1-6
QGW1500
325-1600
1-6
QGW2800
1016-2800
1-2
QGN100
50-300
1-4
()
Outer walls of shot blasting machine
QGN700
325-720
1-2
QGN1000
720-1016
1-4
QGN1500
1016-1500
1-4
Shandong Kaitai Shot-blasting Machinery Co.,Ltd is a professional enterprise which integrates with technical research, development, production, installation, and debugging. Cooperated with machinery college of Jinan University, we have developed cleaning and intensification equipment of shot-blasting and shot-peening.
The company has first-class technology research-development center and well-developed quality management system, and we have passed ISO9001 international quality system certification. Our company is the National Blasting & Peening Standardization Technology Committee Unit. And the company takes part in and sets down the national standard Parabolic Shot Equipment General Technical Conditions All products apply CAD computer-aided design, the appearance applies three-dimensional software design, and key components of numerical simulation use finite element analysis.
Our main products are cleaning machinesand-peening equipmentenviroment-protection and dust-removal equipment,and offer the ideal key equipments to casting, forging and heat treatment, steel structure, container, machinery, locomotive, the machine tool industry.
press casting machine (hot chamber,12T)
Press casting machine,mainly for producing zamak zipper sliders,zipper pullers, small hardwares and etc.
Press casting machine (hot chamber,12T), also named 12T full automatic hot chamber die casting machine. It is mainly for producing Zamak (zinc alloy) zipper sliders, zipper pullers, small hardwares and etc.
Main parts on our machine and their brand:
PLC controller: Mitsubishi (JAPAN);
Travel switch: Panasonic (JAPAN),Steimex(GERMANY);
Electromagnetic valve: Dofluid (TAIWAN);
...
Press casting machine (hot chamber,12T) parameters:
Clamping force 120 KN
Sweeping position 160 mm
Diameter of pull-rod 35 mm
Capacity of crucible 85 kg
Opening position 120 mm
Oil pump flux 25 L/min
Inner space between pull-rods 198*208 mm
Capacity of accumulator 6.3 L
Thickness range of mould 120~150 mm
Capacity of oil box 150 L
Injection vat position 70 mm
Empty loop time 3 s
Diameter of stuff 30~32 mm
Nozzle electric heated power 1 kw
Injection force 16 KN
Melt electric heated power 7.5 kw
Effective injection 100~180 g
Melt fuel dosage 1.2 kg/h
Motor power 4 kw
Working oil pressure 5~7 MPa
Appearance size of machine 2491*840*1740 mm
Weight of machine 1.2 t
Press casting machine (hot chamber,12T), also named 12T full automatic hot chamber die casting machine. It is mainly for producing Zamak (zinc alloy) zipper sliders, zipper pullers, small hardwares and etc.
Main parts on our machine and their brand:
PLC controller: Mitsubishi (JAPAN);
Travel switch: Panasonic (JAPAN),Steimex(GERMANY);
Electromagnetic valve: Dofluid (TAIWAN);
...
Press casting machine (hot chamber,12T) parameters:
Clamping force 120 KN
Sweeping position 160 mm
Diameter of pull-rod 35 mm
Capacity of crucible 85 kg
Opening position 120 mm
Oil pump flux 25 L/min
Inner space between pull-rods 198*208 mm
Capacity of accumulator 6.3 L
Thickness range of mould 120~150 mm
Capacity of oil box 150 L
Injection vat position 70 mm
Empty loop time 3 s
Diameter of stuff 30~32 mm
Nozzle electric heated power 1 kw
Injection force 16 KN
Melt electric heated power 7.5 kw
Effective injection 100~180 g
Melt fuel dosage 1.2 kg/h
Motor power 4 kw
Working oil pressure 5~7 MPa
Appearance size of machine 2491*840*1740 mm
Weight of machine 1.2 t
press machine
Actual usable area is general, it has better bearing power, and suitable for general good construction .
technical parameter
Long * wide * high 6000mm*1100mm*800mm
Weight : 3T
Undercarriage needed materials : 300H
Vertical bar : S12mm
Axis : Diameter 70mm 45#
Wheel : Most large diameter 180mm Material 45#
Transmission : 1 inch chain link bearing model 6210
Power : Main engine electrical machinery capacity 3KW
The machinery takes shape : 10-13rows
Pumping station electrical machinery : 2.2KW four levels
Pressure : 10 megabars
Solenoid valve : DSG-02-3L60
Machine after computer automatic control shuts off
Formation speed : 8m/min
Automatic control disposition
Computer : US Egyptian especially Meier
Encoder : Domestically produced Wuxi Swiss Pu or Japan ohm dragon
Relay : Zhengtai button: Zhengtai
Monitor : Beijing Si Pu Ruite
Frequency changer : Shanghai the purple date or Taiwan reaches
technical parameter
Long * wide * high 6000mm*1100mm*800mm
Weight : 3T
Undercarriage needed materials : 300H
Vertical bar : S12mm
Axis : Diameter 70mm 45#
Wheel : Most large diameter 180mm Material 45#
Transmission : 1 inch chain link bearing model 6210
Power : Main engine electrical machinery capacity 3KW
The machinery takes shape : 10-13rows
Pumping station electrical machinery : 2.2KW four levels
Pressure : 10 megabars
Solenoid valve : DSG-02-3L60
Machine after computer automatic control shuts off
Formation speed : 8m/min
Automatic control disposition
Computer : US Egyptian especially Meier
Encoder : Domestically produced Wuxi Swiss Pu or Japan ohm dragon
Relay : Zhengtai button: Zhengtai
Monitor : Beijing Si Pu Ruite
Frequency changer : Shanghai the purple date or Taiwan reaches
pressure die casting machine DCC200A,200 ton cool chamber machine
1.Cool chamber Die casting machine
2.pressure die casting machine
3.High quality,compter controlled
4.Automatic operation
& pressure die casting machineCold chamber die casting machine,cool chamber die casting machine,aluminum die casting machine,die casting machine-200 ton cool chamber die casting machine.
& Advantage
1. Auto die casting with high speed.
2. Free choice of manual and auto operation.
3. We choose world-famous YUKEN and TOKIMEC products for the hydraulic system.
4. We use the advanced PLC from Mitsubishi for the control system.
5. Our machine is easy to operate, stable in performance, simple in maintenance, safe and convenience.
& Our die casting machine has passed the inspection from National Foundry Forging Machine Quality Supervision Inspection Center, their criteria are conformity with the standard of industry and country.
& With more than 14 years of experience in die casting machine, we have become one of best manufacture in this field.
Projects
UNIT
DCC200T
Clamping force
KN
2000
Clamping stroke
mm
420
Mould board size
mm
755×808
Inner space between tie bar
mm
510×510
Tie bar diameter
mm
90
Mould thickness
mm
210-585
Working oil pressure
kgf/cm
2
140
Injection force
KN
110
Increase force
KN
315
Injection stroke
mm
400
Hammerhead ejection length
mm
142
Injection place
mm
0-125
Hammer diameter
mm
50,60,65
Injection weight
kg
1.3,1.9,2.2
Foundry pressure
kgf/cm2
1,296,899,750
Foundry acreage
cm2
126,180,210
Maximum foundry acreage
cm2
420
Ejector powder
KN
127
Ejector stroke
mm
100
Oil pump mechanical
HP/KW
20/15
Oil box capacity
L
450
Machine size
mm
6500×1220×2760
Machine weight
Kg
7800
2.pressure die casting machine
3.High quality,compter controlled
4.Automatic operation
& pressure die casting machineCold chamber die casting machine,cool chamber die casting machine,aluminum die casting machine,die casting machine-200 ton cool chamber die casting machine.
& Advantage
1. Auto die casting with high speed.
2. Free choice of manual and auto operation.
3. We choose world-famous YUKEN and TOKIMEC products for the hydraulic system.
4. We use the advanced PLC from Mitsubishi for the control system.
5. Our machine is easy to operate, stable in performance, simple in maintenance, safe and convenience.
& Our die casting machine has passed the inspection from National Foundry Forging Machine Quality Supervision Inspection Center, their criteria are conformity with the standard of industry and country.
& With more than 14 years of experience in die casting machine, we have become one of best manufacture in this field.
Projects
UNIT
DCC200T
Clamping force
KN
2000
Clamping stroke
mm
420
Mould board size
mm
755×808
Inner space between tie bar
mm
510×510
Tie bar diameter
mm
90
Mould thickness
mm
210-585
Working oil pressure
kgf/cm
2
140
Injection force
KN
110
Increase force
KN
315
Injection stroke
mm
400
Hammerhead ejection length
mm
142
Injection place
mm
0-125
Hammer diameter
mm
50,60,65
Injection weight
kg
1.3,1.9,2.2
Foundry pressure
kgf/cm2
1,296,899,750
Foundry acreage
cm2
126,180,210
Maximum foundry acreage
cm2
420
Ejector powder
KN
127
Ejector stroke
mm
100
Oil pump mechanical
HP/KW
20/15
Oil box capacity
L
450
Machine size
mm
6500×1220×2760
Machine weight
Kg
7800
pressure die casting parts
Pressure die casting parts
Metal casting machine parts
Stainless steel casting parts
Finish: chrome plated
Pressure die casting parts
Metal casting machine parts
Stainless steel casting parts
Finish: chrome plated
Standard: ASTM, AJSI, DIN, BS and JIS
Max Casting Size: Casting Weight: 0.2-90KG
Dimension Tolerance: CT7
Surface Roughness: Ra6.4~12.5
Injection method: Hot Chamber or Cold Chamber.
Four types of Dies;
1. Single cavity to produce one component
2. Multiple cavity to produce a number of identical parts
3. Unit die to produce different parts at one time
4. Combination die to produce several different parts for an assembly.
Material Available:
Aluminum Alloy 5021/6061/7116 Brass Alloy2604/H62/3602/, ect.
Stainless Steel Alloy 303/304/316, ect.
Steel Alloy carbon steel /die steel
Finish Available:
.Polishing
·Powder Coating
·Electrophoresis
·Chrome Plating
·Anodization
·Vibratory Milling & Electropolish
·Nickel Plating
·Zinc Plating
·Painting
·Dichromate
·Polished Brass
·Phosphating
HT Available
Hardening and tempering
High Frequency Quenching
Carburizing Quenching
Tempering
Quenching
Annealing
1. High Load Capaity and Accuracy
2. High Density and Hardness
3. Abrasion and Corrosion Resistance
4. Presicion Fibucial Correction
5 High Quality with Comptetive Price
6 ROHS compliants
We specilaizie in Wide Range of Casting Parts
Ships and train and automotive & motorcycle fittings
Agriculture Castings Parts
Construction Casting Parts
Engineering Casting Parts
Military Casting Parts
Give us Your Drawings and Specification, we can do it!
Metal casting machine parts
Stainless steel casting parts
Finish: chrome plated
Pressure die casting parts
Metal casting machine parts
Stainless steel casting parts
Finish: chrome plated
Standard: ASTM, AJSI, DIN, BS and JIS
Max Casting Size: Casting Weight: 0.2-90KG
Dimension Tolerance: CT7
Surface Roughness: Ra6.4~12.5
Injection method: Hot Chamber or Cold Chamber.
Four types of Dies;
1. Single cavity to produce one component
2. Multiple cavity to produce a number of identical parts
3. Unit die to produce different parts at one time
4. Combination die to produce several different parts for an assembly.
Material Available:
Aluminum Alloy 5021/6061/7116 Brass Alloy2604/H62/3602/, ect.
Stainless Steel Alloy 303/304/316, ect.
Steel Alloy carbon steel /die steel
Finish Available:
.Polishing
·Powder Coating
·Electrophoresis
·Chrome Plating
·Anodization
·Vibratory Milling & Electropolish
·Nickel Plating
·Zinc Plating
·Painting
·Dichromate
·Polished Brass
·Phosphating
HT Available
Hardening and tempering
High Frequency Quenching
Carburizing Quenching
Tempering
Quenching
Annealing
1. High Load Capaity and Accuracy
2. High Density and Hardness
3. Abrasion and Corrosion Resistance
4. Presicion Fibucial Correction
5 High Quality with Comptetive Price
6 ROHS compliants
We specilaizie in Wide Range of Casting Parts
Ships and train and automotive & motorcycle fittings
Agriculture Castings Parts
Construction Casting Parts
Engineering Casting Parts
Military Casting Parts
Give us Your Drawings and Specification, we can do it!
procuce copper alloy castings
copper alloy casting
standards: ASTM.ISO9001
strict raw material inspection
CNC machines make high output
quick delivery
produce copper alloy castings
company introductions:
we are a manufacturing company with long experience of mental casting, forging and machining products, which including copper alloy, stainless steel forging parts. Our forging machines covered from 50T to 1000T, which suitable from small accessories to big parts. Diverse products had been made in the last couple of years, such as sewing machines parts, trains, valve parts and so on.
We have the ability to make mould by ourselves. The company has achieved ISO 9001:2000. Quickly response and all-side test/measure equipment is our competitive power.
If you are interested in low price casting products from China, please do not hesitate to contact us immediately.
I will supply the products that have best competitive price and high quality.
Detail Descriptions:
material
Copper, brass, bronze, aluminum bronze, tin bronze, silicon bronze, manganese brass
And other copper alloy
Processing step
Casting, sand blast, CNC lathe works, turning, finish machining
features
Smooth surface, High density, hardness, high precision, strong tension
Dimensions or weight
Wide range, according to your drawings
standards
ISO, ASTM, GB or according to customers’ requirements
MOQ
500 pieces
Payment terms
L/C, T/T and West Union
Shipping ports
Ningbo, Shanghai
the pictures of products:
the following pictures are about our advanced equipments, they give our products strict inspection and high productivity.
standards: ASTM.ISO9001
strict raw material inspection
CNC machines make high output
quick delivery
produce copper alloy castings
company introductions:
we are a manufacturing company with long experience of mental casting, forging and machining products, which including copper alloy, stainless steel forging parts. Our forging machines covered from 50T to 1000T, which suitable from small accessories to big parts. Diverse products had been made in the last couple of years, such as sewing machines parts, trains, valve parts and so on.
We have the ability to make mould by ourselves. The company has achieved ISO 9001:2000. Quickly response and all-side test/measure equipment is our competitive power.
If you are interested in low price casting products from China, please do not hesitate to contact us immediately.
I will supply the products that have best competitive price and high quality.
Detail Descriptions:
material
Copper, brass, bronze, aluminum bronze, tin bronze, silicon bronze, manganese brass
And other copper alloy
Processing step
Casting, sand blast, CNC lathe works, turning, finish machining
features
Smooth surface, High density, hardness, high precision, strong tension
Dimensions or weight
Wide range, according to your drawings
standards
ISO, ASTM, GB or according to customers’ requirements
MOQ
500 pieces
Payment terms
L/C, T/T and West Union
Shipping ports
Ningbo, Shanghai
the pictures of products:
the following pictures are about our advanced equipments, they give our products strict inspection and high productivity.
professional carbon brush machine'
product name: carbon brush machine;
most competitive price & highest quality provided for every buyer.
Product Name:
carbon brush machine
;
Usage:
JZ series of sizing presses are suitable for axle box,alone step powder metallurgy products to shape.
Characteristics:
(1)
The presses adopt crank driving,dipping frame,crosshead guiding device and die set for special using,guarantee it is reliable for presses to work,and the precision of the products is high,the consistency too.
(2)
It is easy to build-up and debug for the die set.There are two kinds of working ways that upper core rod or lower core rod fixing.
(3)
Adopt machinery,pneumatic,electric apparatus to combine rationally,so can realize the full-automatic of entry materials,feeding,sizing and coining.
(4)
The presses can be additional set up the lacking materials monitor and the knocking face device in accordance with customers.
(5)
We can produce the safe type hand sizing press in accordance with the customers.
Specification
Type
SPJ-50
SPJ-100
SPJ-150
SPJ-250
SPJ-400
SPJ-630
Max pressing force
KN
50
100
150
250
400
600
Max upper ram stroke
mm
45
50
65
90
120
140
Max coining height
mm
10
20
35
45
60
80
Strokes
n/min
20-60
20-60
20-50
20-45
15-40
15-30
Max open height
mm
100
120
140
160
200
250
Motor power
KW
1.1
1.1
2.2
2.2
5.5
7.5
Machine weight
Kg
500
820
1150
2100
3550
5000
Dimension[LxWxH]
mm
1300*750
*1600
1650*900
*1750
1850*1050
*1920
2000*1220
*2150
2100*1300
*2400
2300*1450
*2800
For more information, please contact us today!
most competitive price & highest quality provided for every buyer.
Product Name:
carbon brush machine
;
Usage:
JZ series of sizing presses are suitable for axle box,alone step powder metallurgy products to shape.
Characteristics:
(1)
The presses adopt crank driving,dipping frame,crosshead guiding device and die set for special using,guarantee it is reliable for presses to work,and the precision of the products is high,the consistency too.
(2)
It is easy to build-up and debug for the die set.There are two kinds of working ways that upper core rod or lower core rod fixing.
(3)
Adopt machinery,pneumatic,electric apparatus to combine rationally,so can realize the full-automatic of entry materials,feeding,sizing and coining.
(4)
The presses can be additional set up the lacking materials monitor and the knocking face device in accordance with customers.
(5)
We can produce the safe type hand sizing press in accordance with the customers.
Specification
Type
SPJ-50
SPJ-100
SPJ-150
SPJ-250
SPJ-400
SPJ-630
Max pressing force
KN
50
100
150
250
400
600
Max upper ram stroke
mm
45
50
65
90
120
140
Max coining height
mm
10
20
35
45
60
80
Strokes
n/min
20-60
20-60
20-50
20-45
15-40
15-30
Max open height
mm
100
120
140
160
200
250
Motor power
KW
1.1
1.1
2.2
2.2
5.5
7.5
Machine weight
Kg
500
820
1150
2100
3550
5000
Dimension[LxWxH]
mm
1300*750
*1600
1650*900
*1750
1850*1050
*1920
2000*1220
*2150
2100*1300
*2400
2300*1450
*2800
For more information, please contact us today!
professional carbon brush machine,,
product name: carbon brush machine;
most competitive price & highest quality provided for every buyer.
Product Name:
carbon brush machine
;
Usage:
JZ series of sizing presses are suitable for axle box,alone step powder metallurgy products to shape.
Characteristics:
(1)
The presses adopt crank driving,dipping frame,crosshead guiding device and die set for special using,guarantee it is reliable for presses to work,and the precision of the products is high,the consistency too.
(2)
It is easy to build-up and debug for the die set.There are two kinds of working ways that upper core rod or lower core rod fixing.
(3)
Adopt machinery,pneumatic,electric apparatus to combine rationally,so can realize the full-automatic of entry materials,feeding,sizing and coining.
(4)
The presses can be additional set up the lacking materials monitor and the knocking face device in accordance with customers.
(5)
We can produce the safe type hand sizing press in accordance with the customers.
Specification
Type
SPJ-50
SPJ-100
SPJ-150
SPJ-250
SPJ-400
SPJ-630
Max pressing force
KN
50
100
150
250
400
600
Max upper ram stroke
mm
45
50
65
90
120
140
Max coining height
mm
10
20
35
45
60
80
Strokes
n/min
20-60
20-60
20-50
20-45
15-40
15-30
Max open height
mm
100
120
140
160
200
250
Motor power
KW
1.1
1.1
2.2
2.2
5.5
7.5
Machine weight
Kg
500
820
1150
2100
3550
5000
Dimension[LxWxH]
mm
1300*750
*1600
1650*900
*1750
1850*1050
*1920
2000*1220
*2150
2100*1300
*2400
2300*1450
*2800
For more information, please contact us today!
most competitive price & highest quality provided for every buyer.
Product Name:
carbon brush machine
;
Usage:
JZ series of sizing presses are suitable for axle box,alone step powder metallurgy products to shape.
Characteristics:
(1)
The presses adopt crank driving,dipping frame,crosshead guiding device and die set for special using,guarantee it is reliable for presses to work,and the precision of the products is high,the consistency too.
(2)
It is easy to build-up and debug for the die set.There are two kinds of working ways that upper core rod or lower core rod fixing.
(3)
Adopt machinery,pneumatic,electric apparatus to combine rationally,so can realize the full-automatic of entry materials,feeding,sizing and coining.
(4)
The presses can be additional set up the lacking materials monitor and the knocking face device in accordance with customers.
(5)
We can produce the safe type hand sizing press in accordance with the customers.
Specification
Type
SPJ-50
SPJ-100
SPJ-150
SPJ-250
SPJ-400
SPJ-630
Max pressing force
KN
50
100
150
250
400
600
Max upper ram stroke
mm
45
50
65
90
120
140
Max coining height
mm
10
20
35
45
60
80
Strokes
n/min
20-60
20-60
20-50
20-45
15-40
15-30
Max open height
mm
100
120
140
160
200
250
Motor power
KW
1.1
1.1
2.2
2.2
5.5
7.5
Machine weight
Kg
500
820
1150
2100
3550
5000
Dimension[LxWxH]
mm
1300*750
*1600
1650*900
*1750
1850*1050
*1920
2000*1220
*2150
2100*1300
*2400
2300*1450
*2800
For more information, please contact us today!
professional carbon brush machine,
product name: carbon brush machine;
most competitive price & highest quality provided for every buyer.
Product Name:
carbon brush machine
;
Usage:
JZ series of sizing presses are suitable for axle box,alone step powder metallurgy products to shape.
Characteristics:
(1)
The presses adopt crank driving,dipping frame,crosshead guiding device and die set for special using,guarantee it is reliable for presses to work,and the precision of the products is high,the consistency too.
(2)
It is easy to build-up and debug for the die set.There are two kinds of working ways that upper core rod or lower core rod fixing.
(3)
Adopt machinery,pneumatic,electric apparatus to combine rationally,so can realize the full-automatic of entry materials,feeding,sizing and coining.
(4)
The presses can be additional set up the lacking materials monitor and the knocking face device in accordance with customers.
(5)
We can produce the safe type hand sizing press in accordance with the customers.
Specification
Type
SPJ-50
SPJ-100
SPJ-150
SPJ-250
SPJ-400
SPJ-630
Max pressing force
KN
50
100
150
250
400
600
Max upper ram stroke
mm
45
50
65
90
120
140
Max coining height
mm
10
20
35
45
60
80
Strokes
n/min
20-60
20-60
20-50
20-45
15-40
15-30
Max open height
mm
100
120
140
160
200
250
Motor power
KW
1.1
1.1
2.2
2.2
5.5
7.5
Machine weight
Kg
500
820
1150
2100
3550
5000
Dimension[LxWxH]
mm
1300*750
*1600
1650*900
*1750
1850*1050
*1920
2000*1220
*2150
2100*1300
*2400
2300*1450
*2800
For more information, please contact us today!
most competitive price & highest quality provided for every buyer.
Product Name:
carbon brush machine
;
Usage:
JZ series of sizing presses are suitable for axle box,alone step powder metallurgy products to shape.
Characteristics:
(1)
The presses adopt crank driving,dipping frame,crosshead guiding device and die set for special using,guarantee it is reliable for presses to work,and the precision of the products is high,the consistency too.
(2)
It is easy to build-up and debug for the die set.There are two kinds of working ways that upper core rod or lower core rod fixing.
(3)
Adopt machinery,pneumatic,electric apparatus to combine rationally,so can realize the full-automatic of entry materials,feeding,sizing and coining.
(4)
The presses can be additional set up the lacking materials monitor and the knocking face device in accordance with customers.
(5)
We can produce the safe type hand sizing press in accordance with the customers.
Specification
Type
SPJ-50
SPJ-100
SPJ-150
SPJ-250
SPJ-400
SPJ-630
Max pressing force
KN
50
100
150
250
400
600
Max upper ram stroke
mm
45
50
65
90
120
140
Max coining height
mm
10
20
35
45
60
80
Strokes
n/min
20-60
20-60
20-50
20-45
15-40
15-30
Max open height
mm
100
120
140
160
200
250
Motor power
KW
1.1
1.1
2.2
2.2
5.5
7.5
Machine weight
Kg
500
820
1150
2100
3550
5000
Dimension[LxWxH]
mm
1300*750
*1600
1650*900
*1750
1850*1050
*1920
2000*1220
*2150
2100*1300
*2400
2300*1450
*2800
For more information, please contact us today!
Anping ShengHua NWJ series heavy weaving mesh machine
the high output
the shortest deliver time
the best quality for your evaluation
pretty competitive price
NWJ series weaving mesh machine
1, Characteristics and usage
The NWJ heavy metal mesh weaving mesh machine is to meet the marker demand, and it has filled the blank of the domestic market. It uses the machine volume net, mastle shuttle, treads the plate to hang the synthesis, the doubles latitude structure, has strong working ability, structure, has the strong, bearing capacity, big silk number density scope width etc. We can weave the wire diameter of 0.1-1.6mm more than 2 meshes, all kinds of metal wire mesh.
2, Main technical parameter
A, the breadth of weaving: 1600mm (1650mm)--3200mm (3250mm) 4000mm--6000mm
B, aperture: tread the plate to hang the synthesis structure
C, crank rotational speed: 28-30circle/minute
D, electric machinery power: 7.5KW, 1440 circles/minute
E, the weight of machines: 11 tons
F, external size: length: 3500mm width: 4500mm height: 2500mm
the shortest deliver time
the best quality for your evaluation
pretty competitive price
NWJ series weaving mesh machine
1, Characteristics and usage
The NWJ heavy metal mesh weaving mesh machine is to meet the marker demand, and it has filled the blank of the domestic market. It uses the machine volume net, mastle shuttle, treads the plate to hang the synthesis, the doubles latitude structure, has strong working ability, structure, has the strong, bearing capacity, big silk number density scope width etc. We can weave the wire diameter of 0.1-1.6mm more than 2 meshes, all kinds of metal wire mesh.
2, Main technical parameter
A, the breadth of weaving: 1600mm (1650mm)--3200mm (3250mm) 4000mm--6000mm
B, aperture: tread the plate to hang the synthesis structure
C, crank rotational speed: 28-30circle/minute
D, electric machinery power: 7.5KW, 1440 circles/minute
E, the weight of machines: 11 tons
F, external size: length: 3500mm width: 4500mm height: 2500mm
professional oxygen-free copper rod upward continuous casting machine
The casting system is a new technology of producing oxygen-free copper rods with high conductivity and low oxygen content.
This upward continuous casting system capable of producing directly from cathode copper to bright and long oxygen-free copper rod, copper tube, copper belt and other special shaped copper material. The capacity of this system is reneging from 1000 MT to 20000MT.
Specifications:
Type
Annual Output
Casting Strands
Capacity
Running Power
Size
TSLZ-Φ8-25
1000MT
2
160KW
120KW
12*6*6
TSLZ-Φ8-25
2000MT
4
180KW
150KW
14*6*6
TSLZ-Φ8-25
3000MT
6
200KW
180KW
16*6*6
TSLZ-Φ8-25
4000MT
8
250KW
220KW
18*6*6
TSLZ-Φ8-25
5000MT
8
300KW
250KW
18*6*6
TSLZ-Φ8-25
6000MT
10
360KW
320KW
20*6*6
TSLZ-Φ8-25
8000MT
12
440KW
400KW
22*6*6
TSLZ-Φ8-25
10000MT
16
600KW
550KW
26*6*6
TSLZ-Φ8-25
12000MT
20
700KW
620KW
20*6*6
TSLZ-Φ8-25
15000MT
24
900KW
720KW
22*6*6
TSLZ-Φ16-25
20000MT
24
1200KW
950KW
22*6*6
Material Requiryment:
Cathod copper
copper content:99.96% Min.
Charcoal
water content:5% Max.
Graphite
3299
Parameters:
Oxygen
5ppm
Density
8.92
Conductivity
102%
Resistivity
0.01724Ω
Intension
170%
Elongation
37%
Water requirements:No scale.Standard of softwater.
Power Requirements: 380V 50HZ(Special requirement should be specified in the contract)
This upward continuous casting system capable of producing directly from cathode copper to bright and long oxygen-free copper rod, copper tube, copper belt and other special shaped copper material. The capacity of this system is reneging from 1000 MT to 20000MT.
Specifications:
Type
Annual Output
Casting Strands
Capacity
Running Power
Size
TSLZ-Φ8-25
1000MT
2
160KW
120KW
12*6*6
TSLZ-Φ8-25
2000MT
4
180KW
150KW
14*6*6
TSLZ-Φ8-25
3000MT
6
200KW
180KW
16*6*6
TSLZ-Φ8-25
4000MT
8
250KW
220KW
18*6*6
TSLZ-Φ8-25
5000MT
8
300KW
250KW
18*6*6
TSLZ-Φ8-25
6000MT
10
360KW
320KW
20*6*6
TSLZ-Φ8-25
8000MT
12
440KW
400KW
22*6*6
TSLZ-Φ8-25
10000MT
16
600KW
550KW
26*6*6
TSLZ-Φ8-25
12000MT
20
700KW
620KW
20*6*6
TSLZ-Φ8-25
15000MT
24
900KW
720KW
22*6*6
TSLZ-Φ16-25
20000MT
24
1200KW
950KW
22*6*6
Material Requiryment:
Cathod copper
copper content:99.96% Min.
Charcoal
water content:5% Max.
Graphite
3299
Parameters:
Oxygen
5ppm
Density
8.92
Conductivity
102%
Resistivity
0.01724Ω
Intension
170%
Elongation
37%
Water requirements:No scale.Standard of softwater.
Power Requirements: 380V 50HZ(Special requirement should be specified in the contract)
professional oxygen-free copper tube upward continuous casting machine
With this advanced casting method, the length of copper tube could be over 5000m.
The up-drawing continuous casting system is capable of producing directly from cathode copper to bright and long oxygen-free Copper tube embryo. The annual output of this system is range from 1000 MT to 3000MT.
Specification(straight):
Type
Annual Output
Casting Strands
Capacity
Running Power
Size
TSLZ·G-Φ80-100*6-8
1000MT
2
160KW
120KW
30*8*7
TSLZ·G-Φ170-260*6-8
1500MT
4
160KW
140KW
30*8*7
TSLZ·G-Φ170-260*6-8
2000MT
6
180KW
160KW
30*8*7
TSLZ·G-Φ170-260*6-8
2500MT
6
220KW
180KW
30*8*7
TSLZ·G-Φ170-260*6-8
3000MT
6
250KW
200KW
30*8*7
Specification(coiled):
Type
Annual Output
Casting Strands
Capacity
Running Power
Size
TSLZ·G-Φ30-50*2-2.5
1000MT
6
160KW
120KW
30*8*7
TSLZ·G-Φ170-260*6-8
1500MT
8
160KW
140KW
33*8*7
TSLZ·G-Φ170-260*6-8
2000MT
10
180KW
160KW
36*8*7
TSLZ·G-Φ170-260*6-8
2500MT
12
220KW
180KW
30*8*7
TSLZ·G-Φ170-260*6-8
3000MT
16
250KW
200KW
33*8*7
Material requirement:
Cathode Copper
Copper Content: 99.96% Min.
Charcoal
Moisture: 5% Max.
Graphite
3299
Parameter:
Oxygen
8ppm
Density
8.92
Intension
170% Min.
Elongation
37% Min.
Water requirement: No scale. Standard of soft water.
Power requirement: 380V 50HZ (Special requirement should be specified in the contract)
The up-drawing continuous casting system is capable of producing directly from cathode copper to bright and long oxygen-free Copper tube embryo. The annual output of this system is range from 1000 MT to 3000MT.
Specification(straight):
Type
Annual Output
Casting Strands
Capacity
Running Power
Size
TSLZ·G-Φ80-100*6-8
1000MT
2
160KW
120KW
30*8*7
TSLZ·G-Φ170-260*6-8
1500MT
4
160KW
140KW
30*8*7
TSLZ·G-Φ170-260*6-8
2000MT
6
180KW
160KW
30*8*7
TSLZ·G-Φ170-260*6-8
2500MT
6
220KW
180KW
30*8*7
TSLZ·G-Φ170-260*6-8
3000MT
6
250KW
200KW
30*8*7
Specification(coiled):
Type
Annual Output
Casting Strands
Capacity
Running Power
Size
TSLZ·G-Φ30-50*2-2.5
1000MT
6
160KW
120KW
30*8*7
TSLZ·G-Φ170-260*6-8
1500MT
8
160KW
140KW
33*8*7
TSLZ·G-Φ170-260*6-8
2000MT
10
180KW
160KW
36*8*7
TSLZ·G-Φ170-260*6-8
2500MT
12
220KW
180KW
30*8*7
TSLZ·G-Φ170-260*6-8
3000MT
16
250KW
200KW
33*8*7
Material requirement:
Cathode Copper
Copper Content: 99.96% Min.
Charcoal
Moisture: 5% Max.
Graphite
3299
Parameter:
Oxygen
8ppm
Density
8.92
Intension
170% Min.
Elongation
37% Min.
Water requirement: No scale. Standard of soft water.
Power requirement: 380V 50HZ (Special requirement should be specified in the contract)
professional power press,,
product name: power press;
most competitive price & highest quality provided for every buyer.
Product Name:
power press
;
Usage:
JZ series of sizing presses are suitable for axle box,alone step powder metallurgy products to shape.
Characteristics:
(1)
The presses adopt crank driving,dipping frame,crosshead guiding device and die set for special using,guarantee it is reliable for presses to work,and the precision of the products is high,the consistency too.
(2)
It is easy to build-up and debug for the die set.There are two kinds of working ways that upper core rod or lower core rod fixing.
(3)
Adopt machinery,pneumatic,electric apparatus to combine rationally,so can realize the full-automatic of entry materials,feeding,sizing and coining.
(4)
The presses can be additional set up the lacking materials monitor and the knocking face device in accordance with customers.
(5)
We can produce the safe type hand sizing press in accordance with the customers.
Specification
Type
SPJ-50
SPJ-100
SPJ-150
SPJ-250
SPJ-400
SPJ-630
Max pressing force
KN
50
100
150
250
400
600
Max upper ram stroke
mm
45
50
65
90
120
140
Max coining height
mm
10
20
35
45
60
80
Strokes
n/min
20-60
20-60
20-50
20-45
15-40
15-30
Max open height
mm
100
120
140
160
200
250
Motor power
KW
1.1
1.1
2.2
2.2
5.5
7.5
Machine weight
Kg
500
820
1150
2100
3550
5000
Dimension[LxWxH]
mm
1300*750
*1600
1650*900
*1750
1850*1050
*1920
2000*1220
*2150
2100*1300
*2400
2300*1450
*2800
For more information, please contact us today!
most competitive price & highest quality provided for every buyer.
Product Name:
power press
;
Usage:
JZ series of sizing presses are suitable for axle box,alone step powder metallurgy products to shape.
Characteristics:
(1)
The presses adopt crank driving,dipping frame,crosshead guiding device and die set for special using,guarantee it is reliable for presses to work,and the precision of the products is high,the consistency too.
(2)
It is easy to build-up and debug for the die set.There are two kinds of working ways that upper core rod or lower core rod fixing.
(3)
Adopt machinery,pneumatic,electric apparatus to combine rationally,so can realize the full-automatic of entry materials,feeding,sizing and coining.
(4)
The presses can be additional set up the lacking materials monitor and the knocking face device in accordance with customers.
(5)
We can produce the safe type hand sizing press in accordance with the customers.
Specification
Type
SPJ-50
SPJ-100
SPJ-150
SPJ-250
SPJ-400
SPJ-630
Max pressing force
KN
50
100
150
250
400
600
Max upper ram stroke
mm
45
50
65
90
120
140
Max coining height
mm
10
20
35
45
60
80
Strokes
n/min
20-60
20-60
20-50
20-45
15-40
15-30
Max open height
mm
100
120
140
160
200
250
Motor power
KW
1.1
1.1
2.2
2.2
5.5
7.5
Machine weight
Kg
500
820
1150
2100
3550
5000
Dimension[LxWxH]
mm
1300*750
*1600
1650*900
*1750
1850*1050
*1920
2000*1220
*2150
2100*1300
*2400
2300*1450
*2800
For more information, please contact us today!
pulp molding machine (single level)
used to dry the produtcs after forming
single level, low energy consumption, for pulp molding use only
single level, low energy consumption, for pulp molding use only
pump casting
pump casting
1 TS16949 ISO9001:2000
2 Process: sand casting
3Standard: JIS, DIN, ASTM,BS
4 OEM service
casting
We can offer Casting parts according to your requirement
1.TS16949
2.OEM service available
3.Materials:
Cast Iron: Grey Iron castings/Gray Iron Castings, Malleable Iron Castings, Ductile Iron Castings, with Coated Sand Casting & Green Resin Sand Castings & Sand Castings
4.Process: sand casting
5.Weight range: 1KG-2TON
6.Application: Industrial parts, Machinery parts, hardware, construction parts, valve/valve parts,train,craft,doorhandle,hinge,hydraulicpressure,construction,agricultural machinery
7.Small orders accepted
8.Make machining service as your requirement or drawings
9.Professional service
10.Surface treatment,painting,zinc plating,machining center,,powder coating,Shot Blast,ect.
11.High quality and after sale service
12.Satisfying customers
1.We have advanced technical equipments ,riched engineers, experienced workers
2.All products are strictly inspected by operator and QC
3.Our quality management system is in conformance with ISO9001:2000
,
1 TS16949 ISO9001:2000
2 Process: sand casting
3Standard: JIS, DIN, ASTM,BS
4 OEM service
casting
We can offer Casting parts according to your requirement
1.TS16949
2.OEM service available
3.Materials:
Cast Iron: Grey Iron castings/Gray Iron Castings, Malleable Iron Castings, Ductile Iron Castings, with Coated Sand Casting & Green Resin Sand Castings & Sand Castings
4.Process: sand casting
5.Weight range: 1KG-2TON
6.Application: Industrial parts, Machinery parts, hardware, construction parts, valve/valve parts,train,craft,doorhandle,hinge,hydraulicpressure,construction,agricultural machinery
7.Small orders accepted
8.Make machining service as your requirement or drawings
9.Professional service
10.Surface treatment,painting,zinc plating,machining center,,powder coating,Shot Blast,ect.
11.High quality and after sale service
12.Satisfying customers
1.We have advanced technical equipments ,riched engineers, experienced workers
2.All products are strictly inspected by operator and QC
3.Our quality management system is in conformance with ISO9001:2000
,
pump housing series
pump housing series
it's used for pump
ISO 9001:2000 certified
sample can be shipped to check quality
pump housing series
Item name
pump housing
processing facilities
Machining center/CNC lathes
Grinding machines/wire-cuts
Drilling machines/Milling machines
processing materials
Aluminum Alloy
5021/6063/2017/7075
Brass Alloy
2604/H62/3602/etc
Stainless Steel Alloy
303/304/316/etc
Steel Alloy
carbon steel/die steel
other materials as your requirements
1)Strictly requirement in every part of the manufacturing process
2)Competitive price & high quality
3)Excellent service & integrity management
please feel free to contact us for more details,if you are interested in our products
precision casting
Item Name
Stainless steel Casting Part
Material
Stainless steel 304
Standard
JIS DIN ASTM BS
Weight
1- 300KG
Process
Sand Casting Founding
Heat Treatment Surface Treatment
Delivery Time
15 days after payment
Price Term
FOB CIF
Related Products
Ductile iron casting Grey iron casting Wood pattern Alloy iron casting Alloy steel casting
Carbon steel casting Stainless steel casting
Introduction
We located in Dalian city, China, and Dalian is an important central city of harbor, industry, trade, tourism, finance and information in Northern China.
We have our own production workshops. We are confident that we can supply products completely in accordance with customer's requirement.
it's used for pump
ISO 9001:2000 certified
sample can be shipped to check quality
pump housing series
Item name
pump housing
processing facilities
Machining center/CNC lathes
Grinding machines/wire-cuts
Drilling machines/Milling machines
processing materials
Aluminum Alloy
5021/6063/2017/7075
Brass Alloy
2604/H62/3602/etc
Stainless Steel Alloy
303/304/316/etc
Steel Alloy
carbon steel/die steel
other materials as your requirements
1)Strictly requirement in every part of the manufacturing process
2)Competitive price & high quality
3)Excellent service & integrity management
please feel free to contact us for more details,if you are interested in our products
precision casting
Item Name
Stainless steel Casting Part
Material
Stainless steel 304
Standard
JIS DIN ASTM BS
Weight
1- 300KG
Process
Sand Casting Founding
Heat Treatment Surface Treatment
Delivery Time
15 days after payment
Price Term
FOB CIF
Related Products
Ductile iron casting Grey iron casting Wood pattern Alloy iron casting Alloy steel casting
Carbon steel casting Stainless steel casting
Introduction
We located in Dalian city, China, and Dalian is an important central city of harbor, industry, trade, tourism, finance and information in Northern China.
We have our own production workshops. We are confident that we can supply products completely in accordance with customer's requirement.
pump parts
pump parts
1 TS16949 ISO9001:2000
2 Process: sand casting
3Standard: JIS, DIN, ASTM,BS
4 OEM service
pump parts
We can offer Casting parts according to your requirement
1.TS16949
2.OEM service available
3.Materials:
Cast Iron: Grey Iron castings/Gray Iron Castings, Malleable Iron Castings, Ductile Iron Castings, with Coated Sand Casting & Green Resin Sand Castings & Sand Castings
4.Process: sand casting
5.Weight range: 1KG-2TON
6.Application: Industrial parts, Machinery parts, hardware, construction parts, valve/valve parts,train,craft,doorhandle,hinge,hydraulicpressure,construction,agricultural machinery
7.Small orders accepted
8.Make machining service as your requirement or drawings
9.Professional service
10.Surface treatment,painting,zinc plating,machining center,,powder coating,Shot Blast,ect.
11.High quality and after sale service
12.Satisfying customers
1.We have advanced technical equipments ,riched engineers, experienced workers
2.All products are strictly inspected by operator and QC
3.Our quality management system is in conformance with ISO9001:2000
,
1 TS16949 ISO9001:2000
2 Process: sand casting
3Standard: JIS, DIN, ASTM,BS
4 OEM service
pump parts
We can offer Casting parts according to your requirement
1.TS16949
2.OEM service available
3.Materials:
Cast Iron: Grey Iron castings/Gray Iron Castings, Malleable Iron Castings, Ductile Iron Castings, with Coated Sand Casting & Green Resin Sand Castings & Sand Castings
4.Process: sand casting
5.Weight range: 1KG-2TON
6.Application: Industrial parts, Machinery parts, hardware, construction parts, valve/valve parts,train,craft,doorhandle,hinge,hydraulicpressure,construction,agricultural machinery
7.Small orders accepted
8.Make machining service as your requirement or drawings
9.Professional service
10.Surface treatment,painting,zinc plating,machining center,,powder coating,Shot Blast,ect.
11.High quality and after sale service
12.Satisfying customers
1.We have advanced technical equipments ,riched engineers, experienced workers
2.All products are strictly inspected by operator and QC
3.Our quality management system is in conformance with ISO9001:2000
,
pure water treatment device for industry
pure water treatment device for industry
1.Full-automatic
2.high quality and compettive price\
3.MOQ:1 set/sets
4.QS and FDA
pure water treatment device for industry
1,size 10m³/h
2,On-line function description in using
Reverse osmosis also called (RO)
With enough pressure to solution of solvents (usually refers to water) through reverse-osmosis membrane (or called a semipermeable membrane) isolated,
achieving the purpose of separation and extraction and purification and concentration .
Because it is opposite with natural penetration directions, it is called reverse osmosis.
Reverse osmosis technology is the most advanced and most energy-saving effectively in membrane separation technology, due to reverse osmosis membrane aperture is very small,it is only for 10 * 10-10m (10) or so. Therefore it can effectively dissolve in water remove salt, colloid, microorganism and heavy metal ions, organic matter, heat source, viruses, bacteria etc.
3, Description of equipment
The company's RO pure water device, which is given priority to the import of composite membrane module is , complementary with multistage centrifugal pump, high-pressure pipe, valve, instrumentation and electrical control system etc.
After optimization design,it is with strong fight corrupt capability ,high desalination rate , low operating cost, advanced in automatization.
4Main features
(a)Adopting imported reverse osmosis membrane, high desalination rate ,long service life , low operation cost
(b)Using automatic pretreatment system, the realization airless humanizing operation;
(c)Adopting imported mudline booster pump with low noise(Gelanfu), high efficiency, stable and reliable
(d)On-line water quality monitoring control, monitoring of water quality change in real time, to guarantee the security of water quality
(E)Tailored to local water personalized design, omni-directional meets the demand.
1.Full-automatic
2.high quality and compettive price\
3.MOQ:1 set/sets
4.QS and FDA
pure water treatment device for industry
1,size 10m³/h
2,On-line function description in using
Reverse osmosis also called (RO)
With enough pressure to solution of solvents (usually refers to water) through reverse-osmosis membrane (or called a semipermeable membrane) isolated,
achieving the purpose of separation and extraction and purification and concentration .
Because it is opposite with natural penetration directions, it is called reverse osmosis.
Reverse osmosis technology is the most advanced and most energy-saving effectively in membrane separation technology, due to reverse osmosis membrane aperture is very small,it is only for 10 * 10-10m (10) or so. Therefore it can effectively dissolve in water remove salt, colloid, microorganism and heavy metal ions, organic matter, heat source, viruses, bacteria etc.
3, Description of equipment
The company's RO pure water device, which is given priority to the import of composite membrane module is , complementary with multistage centrifugal pump, high-pressure pipe, valve, instrumentation and electrical control system etc.
After optimization design,it is with strong fight corrupt capability ,high desalination rate , low operating cost, advanced in automatization.
4Main features
(a)Adopting imported reverse osmosis membrane, high desalination rate ,long service life , low operation cost
(b)Using automatic pretreatment system, the realization airless humanizing operation;
(c)Adopting imported mudline booster pump with low noise(Gelanfu), high efficiency, stable and reliable
(d)On-line water quality monitoring control, monitoring of water quality change in real time, to guarantee the security of water quality
(E)Tailored to local water personalized design, omni-directional meets the demand.
pure water-treatment device
pure water-treatment device
1.Full-automatic
2.high quality and compettive price\
3.MOQ:1 set/sets
4.certificate:QS and FDA
pure water-treatment device
1,size 10m³/h
2,On-line function description in using
Reverse osmosis also called (RO)
With enough pressure to solution of solvents (usually refers to water) through reverse-osmosis membrane (or called a semipermeable membrane) isolated,
achieving the purpose of separation and extraction and purification and concentration .
Because it is opposite with natural penetration directions, it is called reverse osmosis.
Reverse osmosis technology is the most advanced and most energy-saving effectively in membrane separation technology, due to reverse osmosis membrane aperture is very small,it is only for 10 * 10-10m (10) or so. Therefore it can effectively dissolve in water remove salt, colloid, microorganism and heavy metal ions, organic matter, heat source, viruses, bacteria etc.
3, Description of equipment
The company's RO pure water device, which is given priority to the import of composite membrane module is , complementary with multistage centrifugal pump, high-pressure pipe, valve, instrumentation and electrical control system etc.
After optimization design,it is with strong fight corrupt capability ,high desalination rate , low operating cost, advanced in automatization.
4Main features
(a)Adopting imported reverse osmosis membrane, high desalination rate ,long service life , low operation cost
(b)Using automatic pretreatment system, the realization airless humanizing operation;
(c)Adopting imported mudline booster pump with low noise(Gelanfu), high efficiency, stable and reliable
(d)On-line water quality monitoring control, monitoring of water quality change in real time, to guarantee the security of water quality
(E)Tailored to local water personalized design, omni-directional meets the demand.
1.Full-automatic
2.high quality and compettive price\
3.MOQ:1 set/sets
4.certificate:QS and FDA
pure water-treatment device
1,size 10m³/h
2,On-line function description in using
Reverse osmosis also called (RO)
With enough pressure to solution of solvents (usually refers to water) through reverse-osmosis membrane (or called a semipermeable membrane) isolated,
achieving the purpose of separation and extraction and purification and concentration .
Because it is opposite with natural penetration directions, it is called reverse osmosis.
Reverse osmosis technology is the most advanced and most energy-saving effectively in membrane separation technology, due to reverse osmosis membrane aperture is very small,it is only for 10 * 10-10m (10) or so. Therefore it can effectively dissolve in water remove salt, colloid, microorganism and heavy metal ions, organic matter, heat source, viruses, bacteria etc.
3, Description of equipment
The company's RO pure water device, which is given priority to the import of composite membrane module is , complementary with multistage centrifugal pump, high-pressure pipe, valve, instrumentation and electrical control system etc.
After optimization design,it is with strong fight corrupt capability ,high desalination rate , low operating cost, advanced in automatization.
4Main features
(a)Adopting imported reverse osmosis membrane, high desalination rate ,long service life , low operation cost
(b)Using automatic pretreatment system, the realization airless humanizing operation;
(c)Adopting imported mudline booster pump with low noise(Gelanfu), high efficiency, stable and reliable
(d)On-line water quality monitoring control, monitoring of water quality change in real time, to guarantee the security of water quality
(E)Tailored to local water personalized design, omni-directional meets the demand.
r5.25m continous casting machine for rectangle billet
we are the professional manufacturer to designed the continuous casting machine according to the customer's requirement
the characteristic
1, the supporting mode of ladle--revolving table, ladle vehicle
2, tundish car--fully-mounted, semi-mounted
3, mould mode--entirety copper tube type, parabolic conicity type
4, The casting strand control--cesium-source liquid auto control
5, Vibration mode--whole-plate spring, half-plate spring, sine, nonsine
6, Recooling mode-- inhalator auto water feeding, water cooling auto water feeding
7, Straightening mode--full arc type five-roller continuous straightening, AC frequency control
8, Dummy mode--self-adapting entirety rigidity dummy bar
9, Cutting mode--narrow slit auto flame cutting machine, hydraulic shear
10, Steel pushing mode--robotistic elevated structure
11, Control mode--controlled by PLC,it can be changed between automatic and manual drive.
(2)technical parameter
mode
full arc type five-roller continuous straightening CCM for square billet and rectangular bloom
Strand quantity
1,2,3,4,5,6,8,10
radius
5.25,6,6.5,7,8,9,10,12,16m
Billet specification
square billet 120×120,150×150,180×180,200×200,240×240,300×300mm
rectangular bloom(120~200)×(240~600)
round billet Φ100~Φ450
shaped blank 500×300×85,280×200×80
Drawing speed
120×120 3.8 m/min
150×150 3.5 m/min
200×200 2 m/min
Annual output
150,000~200,000/strand
Overflow rate
≤0.1%
Continuous casting time
≥8h
(3)list of plant
No
Item
remark
1
Ladle turret
2
tundish
3
Tundish roaster
4
Console frame of revolving operation box
5
Tundish car
6
mould
7
Mould vibration device
8
Recooling sprayer device
9
Guiding section
10
Straightening machine
11
Dummy bar
12
The storage device of dummy bar
13
Before cutting rolling path
14
Flame cutting machine
15
Delivery roller path
16
Discharge roller path and fixed plate
17
Steel pusher
18
Cooling bed
19
Steam stain off device
20
Water cooling system
21
Hydraulic system
22
Lubricating system
23
The control system of computer/apparatus/electric
24
subtotal
25
Off-line list of CCM
26
Maintenance frame of mould
27
Drying device of tundish
28
Tundish mold
29
arc sample plate (mould)
30
arc sample plate(guiding section)
the characteristic
1, the supporting mode of ladle--revolving table, ladle vehicle
2, tundish car--fully-mounted, semi-mounted
3, mould mode--entirety copper tube type, parabolic conicity type
4, The casting strand control--cesium-source liquid auto control
5, Vibration mode--whole-plate spring, half-plate spring, sine, nonsine
6, Recooling mode-- inhalator auto water feeding, water cooling auto water feeding
7, Straightening mode--full arc type five-roller continuous straightening, AC frequency control
8, Dummy mode--self-adapting entirety rigidity dummy bar
9, Cutting mode--narrow slit auto flame cutting machine, hydraulic shear
10, Steel pushing mode--robotistic elevated structure
11, Control mode--controlled by PLC,it can be changed between automatic and manual drive.
(2)technical parameter
mode
full arc type five-roller continuous straightening CCM for square billet and rectangular bloom
Strand quantity
1,2,3,4,5,6,8,10
radius
5.25,6,6.5,7,8,9,10,12,16m
Billet specification
square billet 120×120,150×150,180×180,200×200,240×240,300×300mm
rectangular bloom(120~200)×(240~600)
round billet Φ100~Φ450
shaped blank 500×300×85,280×200×80
Drawing speed
120×120 3.8 m/min
150×150 3.5 m/min
200×200 2 m/min
Annual output
150,000~200,000/strand
Overflow rate
≤0.1%
Continuous casting time
≥8h
(3)list of plant
No
Item
remark
1
Ladle turret
2
tundish
3
Tundish roaster
4
Console frame of revolving operation box
5
Tundish car
6
mould
7
Mould vibration device
8
Recooling sprayer device
9
Guiding section
10
Straightening machine
11
Dummy bar
12
The storage device of dummy bar
13
Before cutting rolling path
14
Flame cutting machine
15
Delivery roller path
16
Discharge roller path and fixed plate
17
Steel pusher
18
Cooling bed
19
Steam stain off device
20
Water cooling system
21
Hydraulic system
22
Lubricating system
23
The control system of computer/apparatus/electric
24
subtotal
25
Off-line list of CCM
26
Maintenance frame of mould
27
Drying device of tundish
28
Tundish mold
29
arc sample plate (mould)
30
arc sample plate(guiding section)
Anping ShengHua NWJ series heavy weaving mesh machine
the high output
the shortest deliver time
the best quality for your evaluation
pretty competitive price
NWJ series weaving mesh machine
1, Characteristics and usage
The NWJ heavy metal mesh weaving mesh machine is to meet the marker demand, and it has filled the blank of the domestic market. It uses the machine volume net, mastle shuttle, treads the plate to hang the synthesis, the doubles latitude structure, has strong working ability, structure, has the strong, bearing capacity, big silk number density scope width etc. We can weave the wire diameter of 0.1-1.6mm more than 2 meshes, all kinds of metal wire mesh.
2, Main technical parameter
A, the breadth of weaving: 1600mm (1650mm)--3200mm (3250mm) 4000mm--6000mm
B, aperture: tread the plate to hang the synthesis structure
C, crank rotational speed: 28-30circle/minute
D, electric machinery power: 7.5KW, 1440 circles/minute
E, the weight of machines: 11 tons
F, external size: length: 3500mm width: 4500mm height: 2500mm
the shortest deliver time
the best quality for your evaluation
pretty competitive price
NWJ series weaving mesh machine
1, Characteristics and usage
The NWJ heavy metal mesh weaving mesh machine is to meet the marker demand, and it has filled the blank of the domestic market. It uses the machine volume net, mastle shuttle, treads the plate to hang the synthesis, the doubles latitude structure, has strong working ability, structure, has the strong, bearing capacity, big silk number density scope width etc. We can weave the wire diameter of 0.1-1.6mm more than 2 meshes, all kinds of metal wire mesh.
2, Main technical parameter
A, the breadth of weaving: 1600mm (1650mm)--3200mm (3250mm) 4000mm--6000mm
B, aperture: tread the plate to hang the synthesis structure
C, crank rotational speed: 28-30circle/minute
D, electric machinery power: 7.5KW, 1440 circles/minute
E, the weight of machines: 11 tons
F, external size: length: 3500mm width: 4500mm height: 2500mm
ramming head
1. the quantity of the surface is good
2. the cast have less vice
3. easy to stripping
4. high precision
Our factory developed many kinds of molding , core-marketing and reclamation complete sets of equipment and every kind of conveying equipment forfuran resin-bonded ,sand and grease-hardening water glass sand . they are exquisitely made . with main components being imported , their performance keep up with the advanced levels of the same products abroad . Acording to the users requirements , we can provide the trunkey engineering of every kind of production line complete sets of equipment , including installation and trial run .
2. the cast have less vice
3. easy to stripping
4. high precision
Our factory developed many kinds of molding , core-marketing and reclamation complete sets of equipment and every kind of conveying equipment forfuran resin-bonded ,sand and grease-hardening water glass sand . they are exquisitely made . with main components being imported , their performance keep up with the advanced levels of the same products abroad . Acording to the users requirements , we can provide the trunkey engineering of every kind of production line complete sets of equipment , including installation and trial run .
Saturday, January 29, 2011
ramming head
1 high automatic
2 high quality of casting
3 high precision
4 save energy
Direct-driven blast wheel
Direct-driven blast wheel is one kind of new-designd, high-Effcient blast wheel, beatiful appearance, compact confi-Guration, low noise, economy and environmental protection Q064Z37 type has the largest power and largest rate abrasive flow .In CHINA now.
Belt-wheel blast wheel
Belt-wheel blast wheel is conventional, large abrasive flow rate and good cleaning effect etc. It is a essential part of the airless shot blast cleaning equipment.
Curve-blade blast wheel
This is the most advanced high-efficiency on the world at the moment, huge blast speed and high-efficiency, uniform clean etc.
2 high quality of casting
3 high precision
4 save energy
Direct-driven blast wheel
Direct-driven blast wheel is one kind of new-designd, high-Effcient blast wheel, beatiful appearance, compact confi-Guration, low noise, economy and environmental protection Q064Z37 type has the largest power and largest rate abrasive flow .In CHINA now.
Belt-wheel blast wheel
Belt-wheel blast wheel is conventional, large abrasive flow rate and good cleaning effect etc. It is a essential part of the airless shot blast cleaning equipment.
Curve-blade blast wheel
This is the most advanced high-efficiency on the world at the moment, huge blast speed and high-efficiency, uniform clean etc.
razor barbed wire machine
Razor barbed wire machine
nine and one strip,used for fence
type: BTO-22,BTO-30,CBT-65
output: 80kg/hour
delivery: 15days
Razor barbed wire mesh machine
Razor barbed wire is a kind of modern security fencing; razor barbed wire can be installed to achieve the result of frightening and stopping to the aggressive perimeter intruder handsome, construction advantage, economic practicality. It has been widely used countries in military field prisons, government buildings and national security facilities.
Output of 24 hours: 500kgs. It is equipped with cutters of 5 different shapes.
Razor barbed wire coil diameter: 450mm; 500mm; 700mm; 960mm.
Razor barbed wire material: Galvanized wire and stainless steel wire.
nine and one strip,used for fence
type: BTO-22,BTO-30,CBT-65
output: 80kg/hour
delivery: 15days
Razor barbed wire mesh machine
Razor barbed wire is a kind of modern security fencing; razor barbed wire can be installed to achieve the result of frightening and stopping to the aggressive perimeter intruder handsome, construction advantage, economic practicality. It has been widely used countries in military field prisons, government buildings and national security facilities.
Output of 24 hours: 500kgs. It is equipped with cutters of 5 different shapes.
Razor barbed wire coil diameter: 450mm; 500mm; 700mm; 960mm.
Razor barbed wire material: Galvanized wire and stainless steel wire.
rebar making machine
rebar making machine
1)make various type reinforced bar with high efficiency
2)long lifetime & full automatic runninning
REBAR MAKING MACHINE
USES:
This kind of cold rolling machine is used to
making various rebar.
WORKING PRINCIPLE:
First reduces the diameter of the hot rolled wire steel bars, and then makes ribs on bars by cold rolling mill.
The milling machine can make the steel bar
HRB335,HRB400 and HRB500
as your requirement. The final productions are 2 ribbed rebar or 3 ribbed rebar.
SPECIFICATION:
mall type (mean the inlet diameter below dia
10mm
) of the cold rolling mills,
medium-sized (mean the inlet diameter below dia
12mm
),
large one(mean the inlet dimameter
below dia14mm
)
TECHNICAL DATA
:
Project
Technical parameter
Unit
Supplementary details
Raw material
Φ6-10
mm
Roller diameter
Φ228
mm
Special-purpose alloy
Equipped with power
75
KW
YVP200-4 variable-frequency
Variable-speed motor
Gear center distance
228
mm
Herringbone gear
Rolling line speed
3
M/s
speed can be adjusted
Sheared length
1-12
m
Flying shear
7.5
KW
Product specification
Φ5-8
mm
Output
o.83-4.26
T/hour
final product:
The final product are 2 ribbed or 3 ribbed deformed steel bar
in circular shape or in line shape.
The whole set of cold rolling line were composed with:
1. Pay-off machine
2. Dephosphorization (detach the scale) and sinking mill (the first time to roll) at the first time
3. Rolling mill
4. Straightening machine
5. Heat treatment (in consideration of you need a low strength close to 500 MPA, we add this machine to strengthen the steel extensibility)
6. Cutting machine (the cutting length on the basis of your set , its speed 1.5-3m/s,it can cut below 12mm or 10mm reinforced steel bar, the final production in line shape)
Or wire re-winding machine (the final productions are in circular shape)
7. Flick rack (most of them we have sold are 9 meters or 12 meters long, of course we can produce according to your requirement). Its automatic, the power is1.5 KW
8 Synthetically control panel.
The line speed is 1.5-3m/s,and can be adjusted.
1)make various type reinforced bar with high efficiency
2)long lifetime & full automatic runninning
REBAR MAKING MACHINE
USES:
This kind of cold rolling machine is used to
making various rebar.
WORKING PRINCIPLE:
First reduces the diameter of the hot rolled wire steel bars, and then makes ribs on bars by cold rolling mill.
The milling machine can make the steel bar
HRB335,HRB400 and HRB500
as your requirement. The final productions are 2 ribbed rebar or 3 ribbed rebar.
SPECIFICATION:
mall type (mean the inlet diameter below dia
10mm
) of the cold rolling mills,
medium-sized (mean the inlet diameter below dia
12mm
),
large one(mean the inlet dimameter
below dia14mm
)
TECHNICAL DATA
:
Project
Technical parameter
Unit
Supplementary details
Raw material
Φ6-10
mm
Roller diameter
Φ228
mm
Special-purpose alloy
Equipped with power
75
KW
YVP200-4 variable-frequency
Variable-speed motor
Gear center distance
228
mm
Herringbone gear
Rolling line speed
3
M/s
speed can be adjusted
Sheared length
1-12
m
Flying shear
7.5
KW
Product specification
Φ5-8
mm
Output
o.83-4.26
T/hour
final product:
The final product are 2 ribbed or 3 ribbed deformed steel bar
in circular shape or in line shape.
The whole set of cold rolling line were composed with:
1. Pay-off machine
2. Dephosphorization (detach the scale) and sinking mill (the first time to roll) at the first time
3. Rolling mill
4. Straightening machine
5. Heat treatment (in consideration of you need a low strength close to 500 MPA, we add this machine to strengthen the steel extensibility)
6. Cutting machine (the cutting length on the basis of your set , its speed 1.5-3m/s,it can cut below 12mm or 10mm reinforced steel bar, the final production in line shape)
Or wire re-winding machine (the final productions are in circular shape)
7. Flick rack (most of them we have sold are 9 meters or 12 meters long, of course we can produce according to your requirement). Its automatic, the power is1.5 KW
8 Synthetically control panel.
The line speed is 1.5-3m/s,and can be adjusted.
rebar producing machine
rebar producing machine:
1)specilized in making ribbed bars
2)material:hot rolled wire steel rods
3)final diameter:4-10mm
rebar producing machine
(cold rolling mill,rolling equipment)
te
chnical parameter of the rebar producing machine:
Project
Technical parameter
Unit
Supplymentary details
Raw material
Φ6-12
mm
Hot Rolled Round
Roller diameter
Φ228
mm
Special-purpose alloy
Equipped with power
75
KW
YVP200-4 variable-frequency
Variable-speed motor
Gear center distance
228
mm
Herringbone gear
Rolling line speed
1.5-2.5
mm
Sheared length
1-12
m/s
Flying shear
5.5
KW
Product specification
Φ5-10
mm
Output
8-80
T/shift
final product:
1)specilized in making ribbed bars
2)material:hot rolled wire steel rods
3)final diameter:4-10mm
rebar producing machine
(cold rolling mill,rolling equipment)
te
chnical parameter of the rebar producing machine:
Project
Technical parameter
Unit
Supplymentary details
Raw material
Φ6-12
mm
Hot Rolled Round
Roller diameter
Φ228
mm
Special-purpose alloy
Equipped with power
75
KW
YVP200-4 variable-frequency
Variable-speed motor
Gear center distance
228
mm
Herringbone gear
Rolling line speed
1.5-2.5
mm
Sheared length
1-12
m/s
Flying shear
5.5
KW
Product specification
Φ5-10
mm
Output
8-80
T/shift
final product:
rebar producing machine
rebar producing machine:
1)specilized in making ribbed bars
2)material:hot rolled wire steel rods
3)final diameter:4-10mm
rebar producing machine
(cold rolling mill,rolling equipment)
te
chnical parameter of the rebar producing machine:
Project
Technical parameter
Unit
Supplymentary details
Raw material
Φ6-12
mm
Hot Rolled Round
Roller diameter
Φ228
mm
Special-purpose alloy
Equipped with power
75
KW
YVP200-4 variable-frequency
Variable-speed motor
Gear center distance
228
mm
Herringbone gear
Rolling line speed
1.5-2.5
mm
Sheared length
1-12
m/s
Flying shear
5.5
KW
Product specification
Φ5-10
mm
Output
8-80
T/shift
final product:
1)specilized in making ribbed bars
2)material:hot rolled wire steel rods
3)final diameter:4-10mm
rebar producing machine
(cold rolling mill,rolling equipment)
te
chnical parameter of the rebar producing machine:
Project
Technical parameter
Unit
Supplymentary details
Raw material
Φ6-12
mm
Hot Rolled Round
Roller diameter
Φ228
mm
Special-purpose alloy
Equipped with power
75
KW
YVP200-4 variable-frequency
Variable-speed motor
Gear center distance
228
mm
Herringbone gear
Rolling line speed
1.5-2.5
mm
Sheared length
1-12
m/s
Flying shear
5.5
KW
Product specification
Φ5-10
mm
Output
8-80
T/shift
final product:
rebar rolling mill
rebar production line,High accuracy,Easy to dismantle and install,Easy to operate,stability of rolling mill ensure quality
rebar rolling mill,rebar production line
Hot rolling mill, continuous rolling mills,a part of rolled steel production line, from
scrap
to
melting
to
casting
to
mill rolling
to
steel
(
use induction furnace and
need not heating furnace
)
Type:Diameter 250~550, supporting the use of the compound gear box.
Speed:Diameter 250~350, line speed is 5~12m/s;Diameter 350~550, line speed is 0.5~5m/s.
Rolling:
Wire steel steel and re-bar steel, angle steel and Channel iron
As a professional rolling mills manufacturer in China, we have a lot of experience in design and manufacturing quality rolling mill. We provide the best price and quality, and it would be great if you could send us more information about your rolling mill project.
Remark:
The website of our production line is:
http://v.youku.com/v_show/id_XMjAxMDExNDg4.html
Welcome to view and guidance, thank you!
rebar rolling mill,rebar production line
Hot rolling mill, continuous rolling mills,a part of rolled steel production line, from
scrap
to
melting
to
casting
to
mill rolling
to
steel
(
use induction furnace and
need not heating furnace
)
Type:Diameter 250~550, supporting the use of the compound gear box.
Speed:Diameter 250~350, line speed is 5~12m/s;Diameter 350~550, line speed is 0.5~5m/s.
Rolling:
Wire steel steel and re-bar steel, angle steel and Channel iron
As a professional rolling mills manufacturer in China, we have a lot of experience in design and manufacturing quality rolling mill. We provide the best price and quality, and it would be great if you could send us more information about your rolling mill project.
Remark:
The website of our production line is:
http://v.youku.com/v_show/id_XMjAxMDExNDg4.html
Welcome to view and guidance, thank you!
rectangular billet continuous casting machine (CCM)
1,level automatic control
2,more than for straightening
3,the short four-bar linkage arm vibration
4,flexible dummy bar
a variety of arc radius, cross-section is greater than 200mm, Length of the length of 3 ~ 14m, big turntable belt weighing device and incident-driven, VVVF. Gas engine ,start the event of the failure to ensure safety in production; weighing devices to prevent the next ladle slag; ladle turret strip stamping device package, which can effectively lower the temperature loss of the first steel. the use of the level of the middle leg tanker, AC variable frequency motor drive, with hydraulic lift and hydraulic trimming and transferring organization to facilitate the replacement of the outlet and in operation; the use of T-large-capacity intermediate tank, the computer design the best package shape, have a good flow of steel market, the middle tank with lid, effective control of steel temperature drop, and to prevent splashing of molten steel outside wounding; the use of continuous temperature measurement devices Tundish; the use of automatic control mold surface, accurate detection of surface location, to prevent leakage of steel steel overflow incidents, and to ensure that internal and surface quality of casting and at the same time greatly reduce the labor intensity of the operator; continuous taper tubular mold to ensure uniformity of water joints, so as to enhance the continuous casting quality, reduce maintenance costs; the use of the short arm of four-bar linkage vibration device, amplitude adjustable; ensure vibration like mold and smooth arc of precision, but also the implementation of high-frequency small-amplitude vibration, effectively improve the surface quality of slab; the use of gas-water atomization cooling and secondary cooling the implementation of automatic control technology, has always been to maintain the process of casting steel billet be reasonably uniform cooling, the slab internal quality assurance; the use of flexible dummy bar to meet the production requirements of various sections; dummy storage device using hydraulic form of four-bar linkage; consecutive multi-frame straightening technology to reduce the slab deformation rate, the effective prevention of the emergence of crack slab straightening; the use of straightening machine including the rack, slow machines, tanks, motors, roller and bearing all the cooling water; At the same time, the surface of the roller special surfacing material, greatly enhanced the life of the roller, to effectively reduced equipment failures, to ensure that the operating rate of the high-caster; the use of auxiliary straightening machine, cutting machine to prevent the slab into the cutting head before Alice guns, and facilitate the transportation and handling of dummy bar billet tail; the use of automatic flame cutting machine, cutter horizontal shift, frequency control, motor return, compact structure, low breakdown rate, cutting a small slit; Length of the use of infrared, the exact length to facilitate the operation of the replacement of fixed length; After cutting and transport roller chain drive a centralized, single-flow single-roller, and roller bearing cooling water, caster gear is located on both sides to avoid the high temperature zone, reducing failures, ease of maintenance;
2,more than for straightening
3,the short four-bar linkage arm vibration
4,flexible dummy bar
a variety of arc radius, cross-section is greater than 200mm, Length of the length of 3 ~ 14m, big turntable belt weighing device and incident-driven, VVVF. Gas engine ,start the event of the failure to ensure safety in production; weighing devices to prevent the next ladle slag; ladle turret strip stamping device package, which can effectively lower the temperature loss of the first steel. the use of the level of the middle leg tanker, AC variable frequency motor drive, with hydraulic lift and hydraulic trimming and transferring organization to facilitate the replacement of the outlet and in operation; the use of T-large-capacity intermediate tank, the computer design the best package shape, have a good flow of steel market, the middle tank with lid, effective control of steel temperature drop, and to prevent splashing of molten steel outside wounding; the use of continuous temperature measurement devices Tundish; the use of automatic control mold surface, accurate detection of surface location, to prevent leakage of steel steel overflow incidents, and to ensure that internal and surface quality of casting and at the same time greatly reduce the labor intensity of the operator; continuous taper tubular mold to ensure uniformity of water joints, so as to enhance the continuous casting quality, reduce maintenance costs; the use of the short arm of four-bar linkage vibration device, amplitude adjustable; ensure vibration like mold and smooth arc of precision, but also the implementation of high-frequency small-amplitude vibration, effectively improve the surface quality of slab; the use of gas-water atomization cooling and secondary cooling the implementation of automatic control technology, has always been to maintain the process of casting steel billet be reasonably uniform cooling, the slab internal quality assurance; the use of flexible dummy bar to meet the production requirements of various sections; dummy storage device using hydraulic form of four-bar linkage; consecutive multi-frame straightening technology to reduce the slab deformation rate, the effective prevention of the emergence of crack slab straightening; the use of straightening machine including the rack, slow machines, tanks, motors, roller and bearing all the cooling water; At the same time, the surface of the roller special surfacing material, greatly enhanced the life of the roller, to effectively reduced equipment failures, to ensure that the operating rate of the high-caster; the use of auxiliary straightening machine, cutting machine to prevent the slab into the cutting head before Alice guns, and facilitate the transportation and handling of dummy bar billet tail; the use of automatic flame cutting machine, cutter horizontal shift, frequency control, motor return, compact structure, low breakdown rate, cutting a small slit; Length of the use of infrared, the exact length to facilitate the operation of the replacement of fixed length; After cutting and transport roller chain drive a centralized, single-flow single-roller, and roller bearing cooling water, caster gear is located on both sides to avoid the high temperature zone, reducing failures, ease of maintenance;
red hanging beam eight wheels pulley blocks
pulley block
Color: red
Rated load: 80t-200t
Type: hanging beam
Eight wheels pulley block
Color: red
Rated load: 80t-200t
Type: rings
Process: forged, heat treatment, assemble
Application: used for the lifting work of pole tower setting, line setting and equipment lifting
Type
rated load lifting capacity
(T)
Test load
(KN)
Wire diameter
weight
(Kg)
applicable
Max
mm
HQD8-80
80
1040.00
26
28
530.0
HQD8-100
100
1300.00
28
31
653.5
HQD8-160
160
2080.00
31
35
1137.4
HQD8-200
200
2500.00
34
38
1363.0
Color: red
Rated load: 80t-200t
Type: hanging beam
Eight wheels pulley block
Color: red
Rated load: 80t-200t
Type: rings
Process: forged, heat treatment, assemble
Application: used for the lifting work of pole tower setting, line setting and equipment lifting
Type
rated load lifting capacity
(T)
Test load
(KN)
Wire diameter
weight
(Kg)
applicable
Max
mm
HQD8-80
80
1040.00
26
28
530.0
HQD8-100
100
1300.00
28
31
653.5
HQD8-160
160
2080.00
31
35
1137.4
HQD8-200
200
2500.00
34
38
1363.0
red hanging beam ten wheels pulley block
pulley block
1. Color: red
2. Rated load: 200t-320t
3. Type: hanging beam
pulley block
Color: red
Rated load: 200t-320t
Type: hanging beam
Process: forged, heat treatment, assemble
Application: used for the lifting work of pole tower setting, line setting and equipment lifting
Type
rated load lifting capacity
(T)
Test load
(KN)
Wire diameter
weight
(Kg)
applicable
Max
mm
HQD10-200
200
2500.00
31
35
1552.0
HQD10-250
250
3125.00
34
38
2033.0
HQD10-320
320
4000.00
40
43
2974.0
1. Color: red
2. Rated load: 200t-320t
3. Type: hanging beam
pulley block
Color: red
Rated load: 200t-320t
Type: hanging beam
Process: forged, heat treatment, assemble
Application: used for the lifting work of pole tower setting, line setting and equipment lifting
Type
rated load lifting capacity
(T)
Test load
(KN)
Wire diameter
weight
(Kg)
applicable
Max
mm
HQD10-200
200
2500.00
31
35
1552.0
HQD10-250
250
3125.00
34
38
2033.0
HQD10-320
320
4000.00
40
43
2974.0
Anping ShengHua NWJ series heavy weaving mesh machine
the high output
the shortest deliver time
the best quality for your evaluation
pretty competitive price
NWJ series weaving mesh machine
1, Characteristics and usage
The NWJ heavy metal mesh weaving mesh machine is to meet the marker demand, and it has filled the blank of the domestic market. It uses the machine volume net, mastle shuttle, treads the plate to hang the synthesis, the doubles latitude structure, has strong working ability, structure, has the strong, bearing capacity, big silk number density scope width etc. We can weave the wire diameter of 0.1-1.6mm more than 2 meshes, all kinds of metal wire mesh.
2, Main technical parameter
A, the breadth of weaving: 1600mm (1650mm)--3200mm (3250mm) 4000mm--6000mm
B, aperture: tread the plate to hang the synthesis structure
C, crank rotational speed: 28-30circle/minute
D, electric machinery power: 7.5KW, 1440 circles/minute
E, the weight of machines: 11 tons
F, external size: length: 3500mm width: 4500mm height: 2500mm
the shortest deliver time
the best quality for your evaluation
pretty competitive price
NWJ series weaving mesh machine
1, Characteristics and usage
The NWJ heavy metal mesh weaving mesh machine is to meet the marker demand, and it has filled the blank of the domestic market. It uses the machine volume net, mastle shuttle, treads the plate to hang the synthesis, the doubles latitude structure, has strong working ability, structure, has the strong, bearing capacity, big silk number density scope width etc. We can weave the wire diameter of 0.1-1.6mm more than 2 meshes, all kinds of metal wire mesh.
2, Main technical parameter
A, the breadth of weaving: 1600mm (1650mm)--3200mm (3250mm) 4000mm--6000mm
B, aperture: tread the plate to hang the synthesis structure
C, crank rotational speed: 28-30circle/minute
D, electric machinery power: 7.5KW, 1440 circles/minute
E, the weight of machines: 11 tons
F, external size: length: 3500mm width: 4500mm height: 2500mm
red three wheel pulley block
3-wheel pulley block
Color: red
Rated load: 3.2t-50t
Type: hook/ chain link/rings
Pulley block
Hook (chain link) series closed triple wheels pulley
Color: red
Rated load: 3.2t-50t
Type: hook/ chain link/rings
Process: forged, heat treatment, assemble
Application: used for the lifting work of pole tower setting, line setting and equipment lifting
Type
rated load lifting capacity
(T)
Test load
(KN)
Wire diameter
weight
(Kg)
applicable
Max
mm
HQG3-3.2
3.2
51.20
7.7
11
9.87
HQL3-3.2
3.2
51.20
7.7
11
9.09
HQG3-5
5
80.00
11
14
16.71
HQL3-5
5
80.00
11
14
15.68
HQG3-8
8
128.00
12.5
15.5
28.65
HQL3-8
8
128.00
12.5
15.5
26.47
HQG3-10
10
160.00
15.5
18.5
49.09
HQL3-10
10
160.00
15.5
18.5
46.82
HQG3-26
16
224.00
17
20
74.28
HQL3-16
16
224.00
17
20
67.67
HQG3-20
20
280.00
20
23
105.14
HQL3-20
20
280.00
20
23
94.63
HQG3-32
32
512.00
35
38
300.00
HQL3-32
32
512.00
35
38
290.00
HQD3-3.2
3.2
51.20
7.7
11
9.24
HQD3-5
5
80.00
11
14
15.35
HQD3-8
8
128.00
12.5
15.5
25.27
HQD3-10
10
160.00
15.5
18.5
45.32
HQD3-16
16
224.00
17
20
58.17
HQD3-20
20
280.00
20
23
85.59
HQD3-32
32
448.00
26
28
187.86
HQD3-50
50
700.00
31
35
359.98
Color: red
Rated load: 3.2t-50t
Type: hook/ chain link/rings
Pulley block
Hook (chain link) series closed triple wheels pulley
Color: red
Rated load: 3.2t-50t
Type: hook/ chain link/rings
Process: forged, heat treatment, assemble
Application: used for the lifting work of pole tower setting, line setting and equipment lifting
Type
rated load lifting capacity
(T)
Test load
(KN)
Wire diameter
weight
(Kg)
applicable
Max
mm
HQG3-3.2
3.2
51.20
7.7
11
9.87
HQL3-3.2
3.2
51.20
7.7
11
9.09
HQG3-5
5
80.00
11
14
16.71
HQL3-5
5
80.00
11
14
15.68
HQG3-8
8
128.00
12.5
15.5
28.65
HQL3-8
8
128.00
12.5
15.5
26.47
HQG3-10
10
160.00
15.5
18.5
49.09
HQL3-10
10
160.00
15.5
18.5
46.82
HQG3-26
16
224.00
17
20
74.28
HQL3-16
16
224.00
17
20
67.67
HQG3-20
20
280.00
20
23
105.14
HQL3-20
20
280.00
20
23
94.63
HQG3-32
32
512.00
35
38
300.00
HQL3-32
32
512.00
35
38
290.00
HQD3-3.2
3.2
51.20
7.7
11
9.24
HQD3-5
5
80.00
11
14
15.35
HQD3-8
8
128.00
12.5
15.5
25.27
HQD3-10
10
160.00
15.5
18.5
45.32
HQD3-16
16
224.00
17
20
58.17
HQD3-20
20
280.00
20
23
85.59
HQD3-32
32
448.00
26
28
187.86
HQD3-50
50
700.00
31
35
359.98
Subscribe to:
Posts (Atom)